From 5e2ee3b2a94f1ac3e6a716af8d60513ab064a678 Mon Sep 17 00:00:00 2001 From: Alyssa Rosenzweig Date: Sat, 13 May 2017 09:12:13 -0700 Subject: Fix underscores in code --- docs/depthcharge/index.md | 18 +++++++++--------- docs/gnulinux/encrypted_parabola.md | 8 ++++---- docs/hardware/gm45_remove_me.md | 10 +++++----- docs/install/bbb_setup.md | 6 +++--- docs/install/r400_external.md | 10 +++++----- docs/install/t400_external.md | 10 +++++----- docs/install/t500_external.md | 10 +++++----- docs/install/t60_unbrick.md | 2 +- docs/install/x60_unbrick.md | 2 +- docs/install/x60tablet_unbrick.md | 2 +- 10 files changed, 39 insertions(+), 39 deletions(-) diff --git a/docs/depthcharge/index.md b/docs/depthcharge/index.md index ebfbbefe..1c0c8d13 100644 --- a/docs/depthcharge/index.md +++ b/docs/depthcharge/index.md @@ -145,24 +145,24 @@ The following parameters can be configured: Kernels signature verification: - # crossystem dev\_boot\_signed\_only=1 # enable - # crossystem dev\_boot\_signed\_only=0 # disable + # crossystem dev_boot_signed_only=1 # enable + # crossystem dev_boot_signed_only=0 # disable External media boot: - # crossystem dev\_boot\_usb=1 # enable - # crossystem dev\_boot\_usb=0 # disable + # crossystem dev_boot_usb=1 # enable + # crossystem dev_boot_usb=0 # disable Legacy payload boot: - # crossystem dev\_boot\_legacy=1 # enable - # crossystem dev\_boot\_legacy=0 # disable + # crossystem dev_boot_legacy=1 # enable + # crossystem dev_boot_legacy=0 # disable Default boot medium: - # crossystem dev\_default\_boot=disk # internal storage - # crossystem dev\_default\_boot=usb # external media - # crossystem dev\_default\_boot=legacy # legacy payload + # crossystem dev_default_boot=disk # internal storage + # crossystem dev_default_boot=usb # external media + # crossystem dev_default_boot=legacy # legacy payload Copyright © 2015 Paul Kocialkowski \ diff --git a/docs/gnulinux/encrypted_parabola.md b/docs/gnulinux/encrypted_parabola.md index 62884ecd..deb0ba4e 100644 --- a/docs/gnulinux/encrypted_parabola.md +++ b/docs/gnulinux/encrypted_parabola.md @@ -336,7 +336,7 @@ I also like to install other packages (base-devel, compilers and so on) and wpa\_supplicant/dialog/iw/wpa\_actiond are needed for wireless after the install: - # pacstrap /mnt base base-devel wpa\_supplicant dialog iw + # pacstrap /mnt base base-devel wpa_supplicant dialog iw wpa\_actiond @@ -386,8 +386,8 @@ Uncomment your needed localisations. For example en\_GB.UTF-8 (UTF-8 is highly recommended over other options). # locale-gen - # echo LANG=en\_GB.UTF-8 > /etc/locale.conf - # export LANG=en\_GB.UTF-8 + # echo LANG=en_GB.UTF-8 > /etc/locale.conf + # export LANG=en_GB.UTF-8 Console font and keymap: @@ -501,7 +501,7 @@ file=/var/log/faillog*\ To unlock a user manually (if a password attempt is failed 3 times), do: - # pam\_tally --user *theusername* --reset What the above + # pam_tally --user *theusername* --reset What the above configuration does is lock the user out for 10 minutes, if they make 3 failed login attempts. diff --git a/docs/hardware/gm45_remove_me.md b/docs/hardware/gm45_remove_me.md index 253b4b6e..5d9bc312 100644 --- a/docs/hardware/gm45_remove_me.md +++ b/docs/hardware/gm45_remove_me.md @@ -90,19 +90,19 @@ file to where **libreboot.rom** is located and then insert the descriptor+gbe file into the ROM image.\ For 16MiB flash chips: - # dd if=ich9fdgbe\_16m.bin of=libreboot.rom bs=1 count=12k + # dd if=ich9fdgbe_16m.bin of=libreboot.rom bs=1 count=12k conv=notrunc For 8MiB flash chips: - # dd if=ich9fdgbe\_8m.bin of=libreboot.rom bs=1 count=12k + # dd if=ich9fdgbe_8m.bin of=libreboot.rom bs=1 count=12k conv=notrunc For 4MiB flash chips: - # dd if=ich9fdgbe\_4m.bin of=libreboot.rom bs=1 count=12k + # dd if=ich9fdgbe_4m.bin of=libreboot.rom bs=1 count=12k conv=notrunc @@ -206,7 +206,7 @@ Assuming that your libreboot image is named **libreboot.rom**, copy the **deblobbed\_descriptor.bin** file to where **libreboot.rom** is located and then run: - # dd if=deblobbed\_descriptor.bin of=libreboot.rom bs=1 count=12k + # dd if=deblobbed_descriptor.bin of=libreboot.rom bs=1 count=12k conv=notrunc @@ -251,7 +251,7 @@ It will generate a 4KiB descriptor file (only the descriptor, no GbE). Insert that into a factory.rom image (NOTE: do this on a copy of it. Keep the original factory.rom stored safely somewhere): - # dd if=demefactory\_4kdescriptor.bin of=factory\_nome.rom bs=1 + # dd if=demefactory_4kdescriptor.bin of=factory_nome.rom bs=1 count=4k conv=notrunc diff --git a/docs/install/bbb_setup.md b/docs/install/bbb_setup.md index 77f805fc..b80203b4 100644 --- a/docs/install/bbb_setup.md +++ b/docs/install/bbb_setup.md @@ -211,8 +211,8 @@ Output: Then: - # echo BB-SPI0-01 > /sys/devices/bone\_capemgr.\*/slots - # cat /sys/devices/bone\_capemgr.\*/slots + # echo BB-SPI0-01 > /sys/devices/bone_capemgr.\*/slots + # cat /sys/devices/bone_capemgr.\*/slots Output: @@ -251,7 +251,7 @@ your BBB. Now test flashrom: - # ./flashrom -p linux\_spi:dev=/dev/spidev1.0,spispeed=512 + # ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 Output: diff --git a/docs/install/r400_external.md b/docs/install/r400_external.md index 6c044f58..80e1a676 100644 --- a/docs/install/r400_external.md +++ b/docs/install/r400_external.md @@ -216,7 +216,7 @@ Log in as root on your BBB, using the instructions in Test that flashrom works: - # ./flashrom -p linux\_spi:dev=/dev/spidev1.0,spispeed=512\ + # ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512\ In this case, the output was: @@ -232,15 +232,15 @@ In this case, the output was: How to backup factory.rom (change the -c option as neeed, for your flash chip): - # ./flashrom -p linux\_spi:dev=/dev/spidev1.0,spispeed=512 -r + # ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -r factory.rom - # ./flashrom -p linux\_spi:dev=/dev/spidev1.0,spispeed=512 -r + # ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -r factory1.rom - # ./flashrom -p linux\_spi:dev=/dev/spidev1.0,spispeed=512 -r + # ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -r factory2.rom @@ -266,7 +266,7 @@ address to one that is correct for your system.** Now flash it: - # ./flashrom -p linux\_spi:dev=/dev/spidev1.0,spispeed=512 -w + # ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w path/to/libreboot/rom/image.rom -V diff --git a/docs/install/t400_external.md b/docs/install/t400_external.md index 414c1a5f..bbb7240f 100644 --- a/docs/install/t400_external.md +++ b/docs/install/t400_external.md @@ -214,7 +214,7 @@ Log in as root on your BBB, using the instructions in Test that flashrom works: - # ./flashrom -p linux\_spi:dev=/dev/spidev1.0,spispeed=512 + # ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 In this case, the output was: @@ -230,15 +230,15 @@ In this case, the output was: How to backup factory.rom (change the -c option as neeed, for your flash chip): - # ./flashrom -p linux\_spi:dev=/dev/spidev1.0,spispeed=512 -r + # ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -r factory.rom - # ./flashrom -p linux\_spi:dev=/dev/spidev1.0,spispeed=512 -r + # ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -r factory1.rom - # ./flashrom -p linux\_spi:dev=/dev/spidev1.0,spispeed=512 -r + # ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -r factory2.rom @@ -264,7 +264,7 @@ address to one that is correct for your system.** Now flash it: - # ./flashrom -p linux\_spi:dev=/dev/spidev1.0,spispeed=512 -w + # ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w path/to/libreboot/rom/image.rom -V diff --git a/docs/install/t500_external.md b/docs/install/t500_external.md index 259d996e..749ef455 100644 --- a/docs/install/t500_external.md +++ b/docs/install/t500_external.md @@ -231,7 +231,7 @@ Log in as root on your BBB, using the instructions in Test that flashrom works: - # ./flashrom -p linux\_spi:dev=/dev/spidev1.0,spispeed=512 + # ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 In this case, the output was: @@ -247,15 +247,15 @@ In this case, the output was: How to backup factory.rom (change the -c option as neeed, for your flash chip): - # ./flashrom -p linux\_spi:dev=/dev/spidev1.0,spispeed=512 -r + # ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -r factory.rom - # ./flashrom -p linux\_spi:dev=/dev/spidev1.0,spispeed=512 -r + # ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -r factory1.rom - # ./flashrom -p linux\_spi:dev=/dev/spidev1.0,spispeed=512 -r + # ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -r factory2.rom @@ -281,7 +281,7 @@ address to one that is correct for your system.** Now flash it: - # ./flashrom -p linux\_spi:dev=/dev/spidev1.0,spispeed=512 -w + # ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w path/to/libreboot/rom/image.rom -V diff --git a/docs/install/t60_unbrick.md b/docs/install/t60_unbrick.md index e3469074..bc8d83e3 100644 --- a/docs/install/t60_unbrick.md +++ b/docs/install/t60_unbrick.md @@ -143,7 +143,7 @@ source code which can be built. SSH'd into the BBB: - # ./flashrom -p linux\_spi:dev=/dev/spidev1.0,spispeed=512 -w + # ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w yourrom.rom diff --git a/docs/install/x60_unbrick.md b/docs/install/x60_unbrick.md index 233209c9..9c558631 100644 --- a/docs/install/x60_unbrick.md +++ b/docs/install/x60_unbrick.md @@ -128,7 +128,7 @@ source code which can be built. SSH'd into the BBB: - # ./flashrom -p linux\_spi:dev=/dev/spidev1.0,spispeed=512 -w + # ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w yourrom.rom diff --git a/docs/install/x60tablet_unbrick.md b/docs/install/x60tablet_unbrick.md index 0386cc1b..3a04ad3f 100644 --- a/docs/install/x60tablet_unbrick.md +++ b/docs/install/x60tablet_unbrick.md @@ -107,7 +107,7 @@ source code which can be built. SSH'd into the BBB: - # ./flashrom -p linux\_spi:dev=/dev/spidev1.0,spispeed=512 -w + # ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w yourrom.rom -- cgit v1.2.3-70-g09d2