From c2b25f1e127ff810e4565d553aafc28b7c44d1a2 Mon Sep 17 00:00:00 2001 From: Alyssa Rosenzweig Date: Fri, 17 Mar 2017 23:05:29 -0700 Subject: Unbork some things --- docs/future/index.md | 114 +++++++++++++++++++++++++-------------------------- docs/future/old.md | 18 ++++---- 2 files changed, 66 insertions(+), 66 deletions(-) (limited to 'docs/future') diff --git a/docs/future/index.md b/docs/future/index.md index d4959d81..94453e55 100644 --- a/docs/future/index.md +++ b/docs/future/index.md @@ -114,7 +114,7 @@ LCD panels on i945 - fix incompatible panels {#lcd_i945_incompatibility} ============================================ Fix T60 issues (see incompatible panels listed at -[../hcl/\#supported\_t60\_list](../hcl/#supported_t60_list)). +[../hcl/#supported\_t60\_list](../hcl/#supported_t60_list)). Run that tool (resources/utilities/i945gpu/intel-regs.py) as root on systems with the offending panels in: @@ -160,12 +160,12 @@ working and nonworking panels. How to dump EDID: -\# apt-get install i2c-tools -\# modprobe i2c-dev + # apt-get install i2c-tools + # modprobe i2c-dev Find out the correct ID to use:\ -\# i2cdetect -l + # i2cdetect -l Example:\ -\# **i2cdump -y 2 0x50** +# **i2cdump -y 2 0x50** Working panel: EDID dump from LG-Philips LP150E05-A2K1: @@ -260,42 +260,42 @@ You are supposed to: With each boot, make notes about what you see and get logs using the [standard test](#standard_test). You will need the files from -[\#intelvbttool\_results](#intelvbttool_results) for each system. +[#intelvbttool\_results](#intelvbttool_results) for each system. -Results (\# means untested): +Results (# means untested): - **X60/X60s:** - - TMD-Toshiba LTD121ECHB: \# - - CMO N121X5-L06: \# - - Samsung LTN121XJ-L07: \# - - BOE-Hydis HT121X01-101: \# + - TMD-Toshiba LTD121ECHB: # + - CMO N121X5-L06: # + - Samsung LTN121XJ-L07: # + - BOE-Hydis HT121X01-101: # - **X60T XGA:** - - BOE-Hydis HV121X03-100: \# + - BOE-Hydis HV121X03-100: # - **X60T SXGA+:** - - BOE-Hydis HV121P01-100: \# + - BOE-Hydis HV121P01-100: # - **T60 14" XGA:** - - Samsung LTN141XA-L01: \# - - CMO N141XC: \# - - BOE-Hydis HT14X14: \# - - TMD-Toshiba LTD141ECMB: \# + - Samsung LTN141XA-L01: # + - CMO N141XC: # + - BOE-Hydis HT14X14: # + - TMD-Toshiba LTD141ECMB: # - **T60 14" SXGA+** - - TMD-Toshiba LTD141EN9B: \# - - Samsung LTN141P4-L02: \# - - Boe-Hydis HT14P12: \# + - TMD-Toshiba LTD141EN9B: # + - Samsung LTN141P4-L02: # + - Boe-Hydis HT14P12: # - **T60 15" XGA** - - Samsung LTN150XG-L08: \# - - LG-Philips LP150X09: \# - - 13N7068 (IDtech): \# - - 13N7069 (CMO): \# + - Samsung LTN150XG-L08: # + - LG-Philips LP150X09: # + - 13N7068 (IDtech): # + - 13N7069 (CMO): # - **T60 15" SXGA+** - - LG-Philips LP150E05-A2K1: \# - - BOE-Hydis HV150P01-100: \# + - LG-Philips LP150E05-A2K1: # + - BOE-Hydis HV150P01-100: # - **T60 15" UXGA** - - BOE-Hydis HV150UX1-100: \# - - IDTech N150U3-L01: \# - - BOE-Hydis HV150UX1-102: \# + - BOE-Hydis HV150UX1-100: # + - IDTech N150U3-L01: # + - BOE-Hydis HV150UX1-102: # - **T50 15" QXGA** - - IDtech IAQX10N: \# - - IDtech IAQX10S: \# + - IDtech IAQX10N: # + - IDtech IAQX10S: # @@ -330,45 +330,45 @@ Then do (and record the output):\ Backup both files (runningvga.bin and intelvbttool\_out), renaming them to match the system and LCD panel used. -[../misc/\#get\_edid\_panelname](../misc/#get_edid_panelname) will show +[../misc/#get\_edid\_panelname](../misc/#get_edid_panelname) will show you how to get the name (model) of the LCD panel used. -Test results (\# means untested and all had docks, unless noted). +Test results (# means untested and all had docks, unless noted). ----------------------------------------------------------------- - **X60/X60s:** - - TMD-Toshiba LTD121ECHB: \# - - CMO N121X5-L06: \# - - Samsung LTN121XJ-L07: \# - - BOE-Hydis HT121X01-101: \# + - TMD-Toshiba LTD121ECHB: # + - CMO N121X5-L06: # + - Samsung LTN121XJ-L07: # + - BOE-Hydis HT121X01-101: # - **X60T XGA (1024x768):** - - BOE-Hydis HV121X03-100: \# + - BOE-Hydis HV121X03-100: # - **X60T SXGA+ (1400x1050):** - - BOE-Hydis HV121P01-100: \# + - BOE-Hydis HV121P01-100: # - **T60 14" XGA (1024x768):** - - Samsung LTN141XA-L01: \# - - CMO N141XC: \# - - BOE-Hydis HT14X14: \# - - TMD-Toshiba LTD141ECMB: \# + - Samsung LTN141XA-L01: # + - CMO N141XC: # + - BOE-Hydis HT14X14: # + - TMD-Toshiba LTD141ECMB: # - **T60 14" SXGA+ (1400x1050):** - - TMD-Toshiba LTD141EN9B: \# - - Samsung LTN141P4-L02: \# - - Boe-Hydis HT14P12: \# + - TMD-Toshiba LTD141EN9B: # + - Samsung LTN141P4-L02: # + - Boe-Hydis HT14P12: # - **T60 15" XGA (1024x768):** - - Samsung LTN150XG-L08: \# - - LG-Philips LP150X09: \# - - 13N7068 (IDtech): \# - - 13N7069 (CMO): \# + - Samsung LTN150XG-L08: # + - LG-Philips LP150X09: # + - 13N7068 (IDtech): # + - 13N7069 (CMO): # - **T60 15" SXGA+ (1400x1050):** - - LG-Philips LP150E05-A2K1: \# - - BOE-Hydis HV150P01-100: \# + - LG-Philips LP150E05-A2K1: # + - BOE-Hydis HV150P01-100: # - **T60 15" UXGA (1600x1200):** - - BOE-Hydis HV150UX1-100: \# - - IDTech N150U3-L01: \# - - BOE-Hydis HV150UX1-102: \# + - BOE-Hydis HV150UX1-100: # + - IDTech N150U3-L01: # + - BOE-Hydis HV150UX1-102: # - **T60 15" QXGA (2048x1536):** - - IDtech IAQX10N: \# - - IDtech IAQX10S: \# + - IDtech IAQX10N: # + - IDtech IAQX10S: # [Back to top of page.](#pagetop) diff --git a/docs/future/old.md b/docs/future/old.md index 95088d38..e834ad51 100644 --- a/docs/future/old.md +++ b/docs/future/old.md @@ -29,7 +29,7 @@ X60 native graphics initialization (with backlight controls) {#x60_native_notes} **This is now obsolete. A better way was found (included in libreboot): ** -***Also check [\#5320\_kernel312fix](#5320_kernel312fix) (to fix 3D on +***Also check [#5320\_kernel312fix](#5320_kernel312fix) (to fix 3D on kernel 3.12/higher)*** **The fix below was done on 5320/6 (from review.coreboot.org) but should @@ -46,13 +46,13 @@ That's all! **This has also been backported into libreboot 5th release Carikli) told me about the register **BLC\_PWM\_CTL** and that you could set it to control backlight. I read that address using devmem2 while running the VBIOS:\ -**\# devmem2 0xe4361254 w** +**# devmem2 0xe4361254 w** The change is also included in libreboot 6. When doing this, it gave back that value. The same trick was used to get backlight controls for T60 (see -[\#t60\_native\_notes](#t60_native_notes)). +[#t60\_native\_notes](#t60_native_notes)). Further notes ------------- @@ -91,7 +91,7 @@ to calculate it without hardcoded laptop-specific values. Therefore, I am supposed to find out the 'display core frequency' (mtjm says there might be a register for it; also, it might be in 5320 or the replay code) and the PWM modulation frequency. -https://en.wikipedia.org/wiki/Backlight\#Flicker\_due\_to\_backlight\_dimming +https://en.wikipedia.org/wiki/Backlight#Flicker\_due\_to\_backlight\_dimming phcoder (Vladimir Serbinenko) who is author of 5320 (review.coreboot.org) talks about 'duty cycle limit' and 'flickering @@ -106,7 +106,7 @@ T60 native graphics initialization (with backlight controls) {#t60_native_notes} **This is now obsolete. A better way was found (included in libreboot): ** -***Also check [\#5320\_kernel312fix](#5320_kernel312fix) (to fix 3D on +***Also check [#5320\_kernel312fix](#5320_kernel312fix) (to fix 3D on kernel 3.12/higher)*** **The fix below was done on an earlier version of 5345 changeset @@ -117,15 +117,15 @@ included in libreboot 6** change **gpu\_backlight** to **0x58BF58BE** Hold on! Check -[../misc/\#get\_edid\_panelname](../misc/#get_edid_panelname) to know +[../misc/#get\_edid\_panelname](../misc/#get_edid_panelname) to know what LCD panel you have. This is important for the next step! Supported panels ---------------- -[../hcl/\#supported\_t60\_list](../hcl/#supported_t60_list). +[../hcl/#supported\_t60\_list](../hcl/#supported_t60_list). -See [\#lcd\_i945\_incompatibility](./#lcd_i945_incompatibility). +See [#lcd\_i945\_incompatibility](./#lcd_i945_incompatibility). @@ -144,7 +144,7 @@ is also now included in libreboot 6 (using the proper way, not the now obsolete. This needs to be re-done for the latest version of 5320. The fix below is (in practise) only for reference, therefore.** -See [\#x60\_cb5927\_testing](#x60_cb5927_testing) for the original (and +See [#x60\_cb5927\_testing](#x60_cb5927_testing) for the original (and current) fix, for the replay code. Now we want to implement that on top of which is the current code for native graphics initialization on i945. -- cgit v1.2.3-70-g09d2