From 144f4cd0a4db1783be9f81d9ba7cef5a5c86ccdc Mon Sep 17 00:00:00 2001
From: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Date: Sat, 13 May 2017 08:27:51 -0700
Subject: Missing bottoms

---
 docs/gnulinux/configuring_parabola.md | 1 +
 docs/gnulinux/encrypted_parabola.md   | 4 ++++
 docs/gnulinux/grub_boot_installer.md  | 1 +
 docs/gnulinux/grub_cbfs.md            | 2 ++
 docs/gnulinux/grub_hardening.md       | 1 +
 5 files changed, 9 insertions(+)

(limited to 'docs/gnulinux')

diff --git a/docs/gnulinux/configuring_parabola.md b/docs/gnulinux/configuring_parabola.md
index c6c1d6f4..a598f6f5 100644
--- a/docs/gnulinux/configuring_parabola.md
+++ b/docs/gnulinux/configuring_parabola.md
@@ -547,6 +547,7 @@ start lxde without lxdm. Read
 Open LXterminal:
 
     $ cp /etc/skel/.xinitrc \~
+
 Open .xinitrc and add the following plus a line break at the bottom of
 the file.\
 *\# Probably not needed. The same locale info that we set before\
diff --git a/docs/gnulinux/encrypted_parabola.md b/docs/gnulinux/encrypted_parabola.md
index f8b97fe8..37b36177 100644
--- a/docs/gnulinux/encrypted_parabola.md
+++ b/docs/gnulinux/encrypted_parabola.md
@@ -544,9 +544,11 @@ You can check if everything is in there (*grub.cfg* and *grubtest.cfg*
 would be really nice):
 
     $ ./cbfstool libreboot.rom print
+
 Extract grubtest.cfg:
 
     $ ./cbfstool libreboot.rom extract -n grubtest.cfg -f grubtest.cfg\
+
 And modify:
 
     $ vi grubtest.cfg
@@ -580,6 +582,7 @@ Save your changes in grubtest.cfg, then delete the unmodified config
 from the ROM image:
 
     $ ./cbfstool libreboot.rom remove -n grubtest.cfg
+
 and insert the modified grubtest.cfg:\
 \$ **./cbfstool libreboot.rom add -n grubtest.cfg -f grubtest.cfg -t
 raw**\
@@ -625,6 +628,7 @@ grub.cfg**\
 Delete the grub.cfg that remained inside the ROM:
 
     $ ./cbfstool libreboot.rom remove -n grub.cfg
+
 Add the modified version that you just made:
 
     $ ./cbfstool libreboot.rom add -n grub.cfg -f grub.cfg -t raw
diff --git a/docs/gnulinux/grub_boot_installer.md b/docs/gnulinux/grub_boot_installer.md
index c360a666..9d1147b3 100644
--- a/docs/gnulinux/grub_boot_installer.md
+++ b/docs/gnulinux/grub_boot_installer.md
@@ -66,6 +66,7 @@ how to create the bootable GNU+Linux USB drive:
 Connect the USB drive. Check dmesg:
 
     $ dmesg | tail
+
 Check to confirm which drive it is, for example, if you think its sd3:
 
     $ disklabel sd3
diff --git a/docs/gnulinux/grub_cbfs.md b/docs/gnulinux/grub_cbfs.md
index 223be4ee..624dec62 100644
--- a/docs/gnulinux/grub_cbfs.md
+++ b/docs/gnulinux/grub_cbfs.md
@@ -120,6 +120,7 @@ Extract grubtest.cfg from the ROM image {#extract_testconfig}
 You can check the contents of the ROM image, inside CBFS:
 
     $ cd \.../libreboot\_util/cbfstool** $ ./cbfstool libreboot.rom
+
 print**
 
 The files *grub.cfg* and *grubtest.cfg* should be present. grub.cfg is
@@ -152,6 +153,7 @@ Testing
 [../install/\#flashrom](../install/#flashrom) for information on how to
 flash it.
     $ cd /libreboot\_util** \# **./flash update libreboot.rom\
+
 Ocassionally, coreboot changes the name of a given board. If flashrom
 complains about a board mismatch, but you are sure that you chose the
 correct ROM image, then run this alternative command:
diff --git a/docs/gnulinux/grub_hardening.md b/docs/gnulinux/grub_hardening.md
index 12485949..31e4ccc8 100644
--- a/docs/gnulinux/grub_hardening.md
+++ b/docs/gnulinux/grub_hardening.md
@@ -33,6 +33,7 @@ Helpful links:
 
 -   [GRUB manual
     \#security](https://www.gnu.org/software/grub/manual/html_node/Security.html#Security)
+
 -   [GRUB info
     pages](http://git.savannah.gnu.org/cgit/grub.git/tree/docs/grub.texi)
 -   [SATA connected storage considered dangerous until proven
-- 
cgit v1.2.3-70-g09d2