From dbc480fb28a694ad5a587be025eabfded7c7784b Mon Sep 17 00:00:00 2001 From: Alyssa Rosenzweig Date: Fri, 17 Mar 2017 22:24:25 -0700 Subject: Convert documentation to markdown --- docs/hardware/x60_heatsink.html | 187 ---------------------------------------- 1 file changed, 187 deletions(-) delete mode 100644 docs/hardware/x60_heatsink.html (limited to 'docs/hardware/x60_heatsink.html') diff --git a/docs/hardware/x60_heatsink.html b/docs/hardware/x60_heatsink.html deleted file mode 100644 index a5e3f847..00000000 --- a/docs/hardware/x60_heatsink.html +++ /dev/null @@ -1,187 +0,0 @@ - - - - - - - - - Libreboot documentation: Switch heatsink on ThinkPad X60 - - - - -
-

Changing the fan/heatsink on the ThinkPad X60

-

- This guide will teach you how to replace the fan and heatsink on your ThinkPad X60. -

-

Back to main index

-
- -
-

Table of Contents

- -
- -
-

Hardware requirements

- -
- -
-

Software requirements (for CPU stress testing)

- -
- -
-

Disassembly

-

- Remove those screws:
- -

-

- Push the keyboard forward (carefully):
- -

-

- Lift the keyboard up and disconnect it from the board:
- -

-

- Grab the right-hand side of the chassis and force it off (gently) and pry up the rest of the chassis:
- -

-

- You should now have this:
- -

-

- Disconnect the wifi antenna cables, the modem cable and the speaker:
- -

-

- Unroute the cables along their path, carefully lifting the tape that holds them in place. Then, disconnect the modem - cable (other end) and power connection and unroute all the cables so that they dangle by the monitor hinge on the right-hand - side:
- -

-

- Disconnect the monitor from the motherboard, and unroute the grey antenna cable, carefully lifting the tape - that holds it into place:
- -

-

- Carefully lift the remaining tape and unroute the left antenna cable so that it is loose:
- -

-

- Remove those screws:
- -

-

- Remove those screws:
- -

-

- Carefully remove the plate, like so:
- -

-

- Remove the SATA connector:
- -

-

- Now remove the motherboard (gently) and cast the lcd/chassis aside:
- -

-

- Look at that black tape above the heatsink, remove it:
- -

-

- Now you have removed it:
- -

- -

- Disconnect the fan and remove all the screws, heatsink will easily come off:
- -

- -

- Remove the old paste with a cloth (from the CPU and heatsink) and then clean both of them with the alcohol (to remove remaining residue of the paste). - Apply a pea-sized amount of paste to the both chipsets that the heatsink covered and spread it evenly (uniformally). - Finally reinstall the heatsink, reversing previous steps. -

- -

- stress -c 2 command can be used to push the CPU to 100%, and xsensors (or watch sensors command) can be used to monitor heat. - Below 90C is ok. -

-
- -
- -

- Copyright © 2014, 2015 Leah Rowe <info@minifree.org>
- Permission is granted to copy, distribute and/or modify this document - under the terms of the Creative Commons Attribution-ShareAlike 4.0 International license - or any later version published by Creative Commons; - - A copy of the license can be found at ../cc-by-sa-4.0.txt -

- -

- Updated versions of the license (when available) can be found at - https://creativecommons.org/licenses/by-sa/4.0/legalcode -

- -

- UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE - EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS - AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF - ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, - IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, - WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR - PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, - ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT - KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT - ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU. -

-

- TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE - TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, - NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, - INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, - COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR - USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN - ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR - DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR - IN PART, THIS LIMITATION MAY NOT APPLY TO YOU. -

-

- The disclaimer of warranties and limitation of liability provided - above shall be interpreted in a manner that, to the extent - possible, most closely approximates an absolute disclaimer and - waiver of all liability. -

- -
- - - -- cgit v1.2.3-70-g09d2