From dbc480fb28a694ad5a587be025eabfded7c7784b Mon Sep 17 00:00:00 2001 From: Alyssa Rosenzweig Date: Fri, 17 Mar 2017 22:24:25 -0700 Subject: Convert documentation to markdown --- docs/hcl/d945gclf.html | 151 ------------------------------------------------- 1 file changed, 151 deletions(-) delete mode 100644 docs/hcl/d945gclf.html (limited to 'docs/hcl/d945gclf.html') diff --git a/docs/hcl/d945gclf.html b/docs/hcl/d945gclf.html deleted file mode 100644 index f18d7c19..00000000 --- a/docs/hcl/d945gclf.html +++ /dev/null @@ -1,151 +0,0 @@ - - - - - - - - - Intel D945GCLF desktop board - - - - -
-

Intel D945GCLF desktop board

- -

- Back to previous index -

- -

- If you just want flashing instructions, go to - ../install/d945gclf.html -

- -

- This board is a mini-itx desktop board for 2008. It uses an atom -230, which is a singe core CPU but it is hyperthreaded so it appears to -have 2 thread to the OS. The flash chip is very small, 512KiB, so grub2 -does not fit, which is why libreboot has to use seabios on this target. -Full disk encryption like on other supported targets will not be -possible, so plan accordingly. -

-

- This board has a 945gc chipset which is the desktop equivalent of -945gm which can be found in the Lenovo x60/t60 or macbook2,1. This -chipset features an ICH7 southbridge. It has 1 DIMM slot that can -accommodate up to 2G of DDR2 RAM. -

-

- Connectivity-wise it has 1 PCI slot, a 10/100 ethernet port, 4 -usb slot and 4 usb ports, with one internal header and 2 SATA ports. -

-

- The D945GCLF2 is an upgraded version of this board. The -differences are: 1 more USB header, 10/100/1000 ethernet and a dual core - cpu (also hyperthreaded). Since the board is almost identical (and -coreboot code seem to indicate that it works, since MAX_CPU=4 is set), -it is believed that it should also work but this is untested. -

-

- Remarks about vendor bios: -

- -

- Here is an image of the board:
-
- Here is an image of the D945GCLF2 board:
-
- And SPI SOIC8 flash chip
- -

-
- -
-

How to replace thermal paste and fan

-

- This board comes with very crappy disposable loud fan, that one has no bearings, -which can not be repaired or oiled properly, do not waste your time trying to fix it, just buy one chinese same size fan
- - -
- Make sure that new one has same wiring
-
- This is a new one, with bearing and maintenable
- -
- Now remove the both coolers rotating them a bit, slowly, then clean both silicons -and both coolers (removing cmos battery first is recommended)
-
- Put a little bit of non conductive thermal paste on both silicons (only cpu silicon iis shown on that image)
-
-

Before assembling new fan, some need new longer screws, make sure having these (on the left is original one, too short for new fan)
-
- After that, assemble your new fan into CPU cooler
-
- Finally assemle both coolers on both chips, do not forget put in the CPU fan connector back, and you are done. -

- -
- -

- Copyright © 2016 Arthur Heymans <arthur@aheymans.xyz>
- Copyright © 2016 Vitaly CastaƱo Solana <vita_cell@hotmail.com>
- Permission is granted to copy, distribute and/or modify this document - under the terms of the Creative Commons Attribution-ShareAlike 4.0 International license - or any later version published by Creative Commons; - - A copy of the license can be found at ../cc-by-sa-4.0.txt -

- -

- Updated versions of the license (when available) can be found at - https://creativecommons.org/licenses/by-sa/4.0/legalcode -

- -

- UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE - EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS - AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF - ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, - IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, - WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR - PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, - ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT - KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT - ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU. -

-

- TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE - TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, - NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, - INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, - COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR - USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN - ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR - DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR - IN PART, THIS LIMITATION MAY NOT APPLY TO YOU. -

-

- The disclaimer of warranties and limitation of liability provided - above shall be interpreted in a manner that, to the extent - possible, most closely approximates an absolute disclaimer and - waiver of all liability. -

- -
- - - - - -- cgit v1.2.3-70-g09d2