From 6caf836e3390faefaad8257b9cec2eb97bdbfb41 Mon Sep 17 00:00:00 2001 From: Alyssa Rosenzweig Date: Mon, 3 Apr 2017 10:23:37 -0700 Subject: Global fix --- docs/hcl/gm45_remove_me.md | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'docs/hcl') diff --git a/docs/hcl/gm45_remove_me.md b/docs/hcl/gm45_remove_me.md index 485bf731..5b705e44 100644 --- a/docs/hcl/gm45_remove_me.md +++ b/docs/hcl/gm45_remove_me.md @@ -165,7 +165,8 @@ regions for your libreboot ROM image. If you are working with libreboot\_src (or git), you can find the source under resources/utilities/ich9deblob/ and will already be compiled if you ran **./oldbuild module all** or **./oldbuild module ich9deblob** -from the main directory (./), otherwise you can build it like so:\ +from the main directory (./), otherwise you can build it like so: + $ ./oldbuild module ich9deblob An executable file named **ich9deblob** will now appear under resources/utilities/ich9deblob/ @@ -177,7 +178,8 @@ GNU+Linux) under ./ich9deblob/. Place the factory.rom from your system (can be obtained using the external flashing guides for GM45 targets linked [../install/](../install/)) in the directory where you have your -ich9deblob executable, then run the tool:\ +ich9deblob executable, then run the tool: + $ ./ich9deblob A 12kiB file named **deblobbed\_descriptor.bin** will now appear. **Keep @@ -233,7 +235,8 @@ The ME interferes with flash read/write in flashrom, and the default descriptor locks some regions. The idea is that doing this will remove all of those restrictions. -Simply run (with factory.rom in the same directory):\ +Simply run (with factory.rom in the same directory): + $ ./demefactory It will generate a 4KiB descriptor file (only the descriptor, no GbE). @@ -305,7 +308,8 @@ Flash chips {#flashchips} **~~- Page 20 and page 9 refer to SDA\_HDO or SDA\_HDOUT~~** only on series 6 or higher chipsets. ICH9-M (X200) does it with a strap - connected to GPIO33 pin (see IRC notes below)\ + connected to GPIO33 pin (see IRC notes below) + - According to page 29, the X200 can have any of the following flash chips: - ATMEL AT26DF321-SU 72.26321.A01 - this is a 32Mb (4MiB) chip -- cgit v1.2.3-70-g09d2