From b9e8c1020a47a183fd9a533f7230197fbb86f472 Mon Sep 17 00:00:00 2001 From: Leah Rowe Date: Sat, 3 Sep 2016 18:06:48 +0100 Subject: docs/install/bbb_ehci.html moved to docs/misc/ --- docs/install/bbb_setup.html | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'docs/install/bbb_setup.html') diff --git a/docs/install/bbb_setup.html b/docs/install/bbb_setup.html index 7eea1e6f..ba36a9d8 100644 --- a/docs/install/bbb_setup.html +++ b/docs/install/bbb_setup.html @@ -71,7 +71,7 @@ External 5V DC power supply (barrel connector), for powering the BBB: the latter can have power supplied via USB, but a dedicated power supply is recommended. These should be easy to find in most places that sell electronics. OPTIONAL. - Only needed if not powering with the USB cable, or if you want to use EHCI debug. + Only needed if not powering with the USB cable, or if you want to use EHCI debug.
  • Pin header / jumper cables (2.54mm / 0.1" headers): you should get male--male, @@ -88,10 +88,10 @@
  • Mini USB A-B cable (the BeagleBone probably already comes - with one.) - OPTIONAL - only needed for EHCI debug or for serial/ssh access without ethernet cable (g_multi kernel module) + with one.) - OPTIONAL - only needed for EHCI debug or for serial/ssh access without ethernet cable (g_multi kernel module) Mini USB A-B cable: the BBB probably already comes with one. OPTIONAL---only needed for - EHCI debug or for serial/SSH access without ethernet cable (g_multi kernel module). + EHCI debug or for serial/SSH access without ethernet cable (g_multi kernel module).
  • FTDI TTL cable or debug board: used for accessing the serial console on the BBB. -- cgit v1.2.3-70-g09d2