From abb8c1db38c7a8e1cd298c5fb75bdf8da9c4c4a7 Mon Sep 17 00:00:00 2001 From: Alyssa Rosenzweig Date: Thu, 25 May 2017 16:55:18 -0700 Subject: Manual typographic fixes --- docs/install/x60_unbrick.md | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'docs/install/x60_unbrick.md') diff --git a/docs/install/x60_unbrick.md b/docs/install/x60_unbrick.md index 9c558631..0f215302 100644 --- a/docs/install/x60_unbrick.md +++ b/docs/install/x60_unbrick.md @@ -101,11 +101,11 @@ flash chip:\ Now wire up the BBB and the Pomona with your PSU.\ Refer to [bbb\_setup.md](bbb_setup.md) for how to setup the BBB for flashing.\ -**Note, the guide mentions a 3.3v DC PSU but you don't need this on the +*Note, the guide mentions a 3.3v DC PSU but you don't need this on the X60: if you don't have or don't want to use an external PSU, then make sure not to connect the 3.3v leads mentioned in the guide; instead, connect the AC adapter (the one that normally charges your battery) so -that the board has power (but don't boot it up)** +that the board has power (but don't boot it up)* ![](../images/x60_unbrick/0017.jpg)\ Correlate the following with the BBB guide linked above: @@ -132,7 +132,7 @@ SSH'd into the BBB: yourrom.rom -It should be **Verifying flash... VERIFIED** at the end. If flashrom +It should be `Verifying flash... VERIFIED` at the end. If flashrom complains about multiple flash chip definitions detected, then choose one of them following the instructions in the output. -- cgit v1.2.3-70-g09d2