From 58386a3231a48821ecdf7110b852f89f13059856 Mon Sep 17 00:00:00 2001 From: Francis Rowe Date: Sat, 16 May 2015 13:35:54 +0100 Subject: docs/install/bbb_setup: don't say green. colour blindness is real Refer to pinouts instead. --- docs/install/bbb_setup.html | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'docs/install') diff --git a/docs/install/bbb_setup.html b/docs/install/bbb_setup.html index ebcc7d22..dacd2548 100644 --- a/docs/install/bbb_setup.html +++ b/docs/install/bbb_setup.html @@ -96,17 +96,17 @@ ATX PSU pinouts are on wikipedia

- On 20-pin ATX PSUs, you can use pin 1 or 2 (orange) for 3.3V, and any of the ground/earth sources (black cables). - Short PS_ON# / Power on (green) to a ground (black. there is one right next to it) using a wire/paperclip/jumper then + On 20-pin ATX PSUs, you can use pin 1 or 2 on a 20-pin ATX PSU (or pin 12 on a 24-pin ATX PSU) for 3.3V, + and any of the ground/earth sources (black cables). + Short PS_ON# / Power on (pin 16 on 24-pin ATX PSU, or pin 14 on a 20-pin ATX PSU) to a ground + (black. there is one right next to it) using a wire/paperclip/jumper then power on the PSU.

On newer 24-pin ATX PSUs, there is an additional 3.3V (orange) on pin 12.

- You only need one 3.3V supply and one ground for the flash chip, after grounding PS_ON# to ground. - Multiple 3.3V supplies means that you could theoretically power multiple flash chips at once with the - same PSU. + You only need one 3.3V supply and one ground for the flash chip, after grounding PS_ON#.

-- cgit v1.2.3-70-g09d2