From 81c76feaebe09c382e0fbfd42e358fc6710d47eb Mon Sep 17 00:00:00 2001 From: Sebastian 'Swift Geek' Grzywna Date: Tue, 20 Mar 2018 19:45:38 +0100 Subject: Remove explody bits from guide --- docs/install/rpi_setup.md | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'docs/install') diff --git a/docs/install/rpi_setup.md b/docs/install/rpi_setup.md index e74432d4..e46191e7 100644 --- a/docs/install/rpi_setup.md +++ b/docs/install/rpi_setup.md @@ -283,10 +283,10 @@ your PI. Power on your Pi, and run the following. Ensure you swap out "your\_chip\_name" with the proper name/model of your chip. Check that it can be read successfully. If you cannot read the chip and receive an -error similar to "no EEPROM Detected" or "0x0 Chip detected" then -you may want to try powering off your PI, and switching the two pins -which are connected to the IO ports. I.E. Connect pins (clip)8 to (pi)19 -and pins (clip)15 to (pi)21 +error similar to "no EEPROM Detected" then +you may want to make sure that MISO/MOSI are not swapped around, check +with multimeter whether voltage is right and that ground is connected +between "programmer" and target. pi# cd ~/flashrom -- cgit v1.2.3-70-g09d2