From ece5fda25e70409032a16ea1cd64b0457279607b Mon Sep 17 00:00:00 2001 From: Alyssa Rosenzweig Date: Mon, 3 Apr 2017 09:19:08 -0700 Subject: Fix -- bug --- docs/install/bbb_setup.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'docs/install') diff --git a/docs/install/bbb_setup.md b/docs/install/bbb_setup.md index 408972e2..85910bd8 100644 --- a/docs/install/bbb_setup.md +++ b/docs/install/bbb_setup.md @@ -77,7 +77,7 @@ Shopping list (pictures of this hardware is shown later): powering with the USB cable, or if you want to use [EHCI debug](../misc/bbb_ehci.html)**. - **Pin header / jumper cables** (2.54mm / 0.1" headers): you should - get male\--male, male\--female and female\--female cables in 10cm + get male--male, male--female and female--female cables in 10cm size. Just get a load of them. Other possible names for these cables/wires/leads are as follows: - flying leads @@ -97,7 +97,7 @@ Shopping list (pictures of this hardware is shown later): - **FTDI TTL cable or debug board**: used for accessing the serial console on the BBB. [This page](http://elinux.org/Beagleboard:BeagleBone_Black_Serial) - contains a list. **OPTIONAL\-\--only needed for serial console on + contains a list. **OPTIONAL\---only needed for serial console on the BBB, if not using SSH via ethernet cable.** [Back to top of page.](#pagetop) -- cgit v1.2.3-70-g09d2