From 29610c6f3b1b1e78ae7cec11b41368fe9d76c6ed Mon Sep 17 00:00:00 2001
From: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Date: Fri, 17 Mar 2017 23:04:16 -0700
Subject: Begin descent from weird command line syntax

---
 docs/misc/index.md | 12 ++++++------
 docs/misc/patch.md |  2 +-
 2 files changed, 7 insertions(+), 7 deletions(-)

(limited to 'docs/misc')

diff --git a/docs/misc/index.md b/docs/misc/index.md
index 23c40197..ce4ec4ea 100644
--- a/docs/misc/index.md
+++ b/docs/misc/index.md
@@ -80,7 +80,7 @@ and added the following to /etc/systemd/system/powertop.service :
     WantedBy=multi-user.target
 
 Finally, as root do that:\
-**\# systemctl enable powertop**\
+    \# systemctl enable powertop
 **\# systemctl start powertop**
 
 The next time you boot the system, the buzz will be gone.
@@ -227,11 +227,11 @@ is included in libreboot, and can be used to enable or disable this
 behaviour.
 
 Disable or enable beeps when removing/adding the charger:\
-$ **sudo ./nvramtool -w power\_management\_beeps=Enable**\
+$     sudo ./nvramtool -w power\_management\_beeps=Enable
 $ **sudo ./nvramtool -w power\_management\_beeps=Disable**
 
 Disable or enable beeps when battery is low:\
-$ **sudo ./nvramtool -w low\_battery\_beep=Enable**\
+$     sudo ./nvramtool -w low\_battery\_beep=Enable
 $ **sudo ./nvramtool -w low\_battery\_beep=Disable**
 
 A reboot is required, for these changes to take effect.
@@ -241,15 +241,15 @@ A reboot is required, for these changes to take effect.
 Get EDID: Find out the name (model) of your LCD panel {#get_edid_panelname}
 =====================================================
 
-Get the panel name with **sudo get-edid | strings**\
+Get the panel name with     sudo get-edid | strings
 Or look in **/sys/class/drm/card0-LVDS-1/edid**
 
 Alternatively you can use i2cdump. In Debian and Devuan, this is in the
 package i2c-tools.\
-$ **sudo modprobe i2c-dev**\
+$     sudo modprobe i2c-dev
 $ **sudo i2cdump -y 5 0x50** (you might have to change the value for
 -y)\
-$ **sudo rmmod i2c-dev**\
+$     sudo rmmod i2c-dev
 You'll see the panel name in the output (from the EDID dump).
 
 If neither of these options work (or they are unavailable), physically
diff --git a/docs/misc/patch.md b/docs/misc/patch.md
index ee594a9e..07b53b03 100644
--- a/docs/misc/patch.md
+++ b/docs/misc/patch.md
@@ -76,7 +76,7 @@ Note the git revision that you did this with:\
 **$ git log**
 
 Alternatively (better yet), commit your changes and then use:\
-$ **git format-patch -N**\
+$     git format-patch -N
 Replace N with the number of commits that you want to show.
 
 [Back to top of page.](#pagetop)
-- 
cgit v1.2.3-70-g09d2