From e87f326a7fe2f3493a28f4e25d207f4d05f7c050 Mon Sep 17 00:00:00 2001 From: Sebastian 'Swift Geek' Grzywna Date: Wed, 9 May 2018 19:20:15 +0200 Subject: c201.md: fix WP screw description It cannot be pulled low because that would enable #WP So I assume it's pulled up weakly on motherboard with some resistor --- docs/install/c201.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'docs') diff --git a/docs/install/c201.md b/docs/install/c201.md index 238c0734..3045b062 100644 --- a/docs/install/c201.md +++ b/docs/install/c201.md @@ -155,7 +155,7 @@ to be opened. The SPI flash is located next to the write protect screw. Its layout is indicated in the picture below. Note that it is not necessary to connect -`WP#` since removing the screw already connects it to ground. Before +`WP#` since after removing the screw it is pulled up weakly to 3v3. Before writing to the chip externally, the battery connector has to be detached. It is located under the heat spreader, that has to be unscrewed from the rest of the case. The battery connector is located on -- cgit v1.2.3-70-g09d2