This section relates to preparing, booting and installing NetBSD on your libreboot system, using nothing more than a USB flash drive (and dd). They've only been tested on a librebooted ThinkPad X60.
It is expected that you use text mode in libreboot (txtmode images), for the early boot process in NetBSD. Suspend/hibernate is broken, according to at least 1 user.
Thanks go to ioxcide in this Reddit post for the initial instructions.
This section is only for the GRUB payload. For depthcharge (used on CrOS devices in libreboot), instructions have yet to be written in the libreboot documentation.
netbsd.iso is the installation image for NetBSD. Adapt the filename accordingly, for your version of NetBSD.
This page on the NetBSD website shows how to create a NetBSD bootable USB drive from within NetBSD itself. You should use the dd method documented there.
This page on the FreeBSD website shows how to create a bootable USB drive for installing FreeBSD. Use the dd on that page. You can also use the same instructions with a NetBSD ISO image.
If you downloaded your ISO on a LibertyBSD or NetBSD system, here is how to create the bootable NetBSD USB drive:
Connect the USB drive. Check dmesg:
$ dmesg | tail
Check to confirm which drive it is, for example, if you think its sd3:
$ disklabel sd3
Check that it wasn't automatically mounted. If it was, unmount it. For example:
$ doas umount /dev/sd3i
dmesg told you what device it is. Overwrite the drive, writing the NetBSD installer to it with dd. For example:
$ doas netbsd.iso of=/dev/rsdXc bs=1M; sync
You should now be able to boot the installer from your USB drive. Continue reading, for information about how to do that.
If you downloaded your ISO on a GNU+Linux system, here is how to create the bootable NetBSD USB drive:
Connect the USB drive. Check dmesg:
$ dmesg
Check lsblk to confirm which drive it is:
$ lsblk
Check that it wasn't automatically mounted. If it was, unmount it. For example:
$ sudo umount /dev/sdX*
# umount /dev/sdX*
dmesg told you what device it is. Overwrite the drive, writing your distro ISO to it with dd. For example:
$ sudo dd if=install60.fs of=/dev/sdX bs=8M; sync
# dd if=netbsd.iso of=/dev/sdX bs=8M; sync
You should now be able to boot the installer from your USB drive. Continue reading, for information about how to do that.
You might have to use an external USB keyboard during the installation. Press C to access the GRUB terminal.
grub> knetbsd -r sd0a (usb0,netbsd1)/netbsd
grub> boot
It will start booting into the NetBSD installer. Follow the normal process for installing NetBSD.
Press C in GRUB to access the command line:
grub> knetbsd -r wd0a (ahci0,netbsd1)/netbsd
grub> boot
NetBSD will start booting. Yay!
If you don't want to drop to the GRUB command line and type in a command to boot NetBSD every time, you can create a GRUB configuration that's aware of your NetBSD installation and that will automatically be used by libreboot.
On your NetBSD root partition, create the /grub directory and add the file libreboot_grub.cfg to it. Inside the libreboot_grub.cfg add these lines:
default=0
timeout=3
menuentry "NetBSD" {
knetbsd -r wd0a (ahci0,netbsd1)/netbsd
}
The next time you boot, you'll see the old Grub menu for a few seconds, then you'll see the a new menu with only NetBSD on the list. After 3 seconds NetBSD will boot, or you can hit enter to boot.
Most of these issues occur when using libreboot with coreboot's 'text mode' instead of the coreboot framebuffer. This mode is useful for booting payloads like memtest86+ which expect text-mode, but for NetBSD it can be problematic when they are trying to switch to a framebuffer because it doesn't exist.
In most cases, you should use the vesafb ROM images. Example filename: libreboot_ukdvorak_vesafb.rom.
Your device names (i.e. usb0, usb1, sd0, sd1, wd0, ahci0, hd0, etc) and numbers may differ. Use TAB completion.
Copyright © 2016 Leah Rowe <info@minifree.org>
Copyright © 2016 Scott Bonds <scott@ggr.com>
Permission is granted to copy, distribute and/or modify this document
under the terms of the Creative Commons Attribution-ShareAlike 4.0 International license
or any later version published by Creative Commons;
A copy of the license can be found at ../cc-by-sa-4.0.txt
Updated versions of the license (when available) can be found at https://creativecommons.org/licenses/by-sa/4.0/legalcode
UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.