If you're using libreboot from git, note that only CrOS devices build at the moment. We merged a newly rewritten build system recently, and we've yet to complete re-integration of older boards into Libreboot. Use Libreboot 20160907 for the time being, unless you're involved in libreboot development
This section relates to preparing, booting and installing a GNU+Linux distribution on your libreboot system, using nothing more than a USB flash drive (and dd).
This section is only for the GRUB payload. For depthcharge (used on CrOS devices in libreboot), instructions have yet to be written in the libreboot documentation.
If you downloaded your ISO on an existing GNU+Linux system, here is how to create the bootable GNU+Linux USB drive:
Connect the USB drive. Check dmesg:
$ dmesg
Check lsblk to confirm which drive it is:
$ lsblk
Check that it wasn't automatically mounted. If it was, unmount it. For example:
$ sudo umount /dev/sdX*
# umount /dev/sdX*
dmesg told you what device it is. Overwrite the drive, writing your distro ISO to it with dd. For example:
$ sudo dd if=gnulinux.iso of=/dev/sdX bs=8M; sync
# dd if=gnulinux.iso of=/dev/sdX bs=8M; sync
You should now be able to boot the installer from your USB drive. Continue reading, for information about how to do that.
This page on the NetBSD website shows how to create a NetBSD bootable USB drive from within NetBSD itself. You should use the dd method documented there. This will also work with any GNU+Linux ISO image.
This page on the FreeBSD website shows how to create a bootable USB drive for installing FreeBSD. Use the dd on that page. You can also use the same instructions with any GNU+Linux ISO image..
If you downloaded your ISO on a LibertyBSD or OpenBSD system, here is how to create the bootable GNU+Linux USB drive:
Connect the USB drive. Check dmesg:
$ dmesg | tail
Check to confirm which drive it is, for example, if you think its sd3:
$ disklabel sd3
Check that it wasn't automatically mounted. If it was, unmount it. For example:
$ doas umount /dev/sd3i
dmesg told you what device it is. Overwrite the drive, writing the OpenBSD installer to it with dd. For example:
$ doas dd if=gnulinux.iso of=/dev/rsdXc bs=1M; sync
You should now be able to boot the installer from your USB drive. Continue reading, for information about how to do that.
Download the Debian or Devuan net installer. You can download the ISO from the homepage on
debian.org, or the Devuan homepage for Devuan.
Use this on the GRUB terminal to boot it from USB (for 64-bit Intel or AMD):
set root='usb0'
linux /install.amd/vmlinuz
initrd /install.amd/initrd.gz
boot
If you are on a 32-bit system (e.g. X60):
set root='usb0'
linux /install.386/vmlinuz
initrd /install.386/initrd.gz
boot
We recommend using the MATE desktop.
Boot it in GRUB using the Parse ISOLINUX config (USB) option. A new menu should appear in GRUB, showing the boot options for that distro; this is a GRUB menu, converted from the usual ISOLINUX menu provided by that distro.
These are generic instructions. They may or may not be correct for your distribution. You must adapt them appropriately, for whatever GNU+Linux distribution it is that you are trying to install.
If the ISOLINUX parser or Search for GRUB configuration options won't work, then press C in GRUB to access the command line.
grub> ls
Get the device from above output, eg (usb0). Example:
grub> cat (usb0)/isolinux/isolinux.cfg
Either this will show the ISOLINUX menuentries for that ISO, or link to other .cfg files, for example /isolinux/foo.cfg.
If it did that, then you do:
grub> cat (usb0)/isolinux/foo.cfg
And so on, until you find the correct menuentries for ISOLINUX.
The file /isolinux/foo.cfg is a fictional example. Do not actually
use this example, unless you actually have that file, if it is appropriate.
For Debian or Devuan (and other debian-based distros), there are typically menuentries listed in /isolinux/txt.cfg or /isolinux/gtk.cfg. For dual-architecture ISO images (i686 and x86_64), there may be separate files/directories for each architecture. Just keep searching through the image, until you find the correct ISOLINUX configuration file. NOTE: Debian 8.6 ISO only lists 32-bit boot options in txt.cfg. This is important if you want 64-bit booting on your system. Devuan versions based on Debian 8.x may also have the same issue.
Now look at the ISOLINUX menuentry. It'll look like:
kernel /path/to/kernel
append PARAMETERS initrd=/path/to/initrd MAYBE_MORE_PARAMETERS
GRUB works the same way, but in it's own way. Example GRUB commands:
grub> set root='usb0'
grub> linux /path/to/kernel PARAMETERS MAYBE_MORE_PARAMETERS
grub> initrd /path/to/initrd
grub> boot
Note: usb0 may be incorrect. Check the output of the ls command in GRUB,
to see a list of USB devices/partitions.
Of course this will vary from distro to distro. If you did all of that correctly, then it should now be booting your USB
drive in the way that you specified.
Most of these issues occur when using libreboot with coreboot's 'text mode' instead of the coreboot framebuffer. This mode is useful for booting payloads like memtest86+ which expect text-mode, but for GNU+Linux distributions it can be problematic when they are trying to switch to a framebuffer because it doesn't exist.
In most cases, you should use the vesafb ROM images. Example filename: libreboot_ukdvorak_vesafb.rom.
Use one of the ROM images with vesafb in the filename (uses coreboot framebuffer instead of text-mode).
When using the ROM images that use coreboot's "text mode" instead of the coreboot framebuffer,
booting the Debian or Devuan net installer results in graphical corruption because it is trying to switch to a framebuffer which doesn't
exist. Use that kernel parameter on the 'linux' line when booting it:
vga=normal fb=false
This forces debian-installer to start in text-mode, instead of trying to switch to a framebuffer.
If selecting text-mode from a GRUB menu created using the ISOLINUX parser, you can press E on the menu entry to add this. Or, if you are booting manually (from GRUB terminal) then just add the parameters.
This workaround was found on the page: https://www.debian.org/releases/stable/i386/ch05s04.html. It should also work for Debian, Devuan and any other apt-get distro that provides debian-installer (text mode) net install method.
Copyright © 2014, 2015, 2016 Leah Rowe <info@minifree.org>
Copyright © 2016 Scott Bonds <scott@ggr.com>
Permission is granted to copy, distribute and/or modify this document
under the terms of the Creative Commons Attribution-ShareAlike 4.0 International license
or any later version published by Creative Commons;
A copy of the license can be found at ../cc-by-sa-4.0.txt
Updated versions of the license (when available) can be found at https://creativecommons.org/licenses/by-sa/4.0/legalcode
UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.