diff -rupN memtest86+-5.01_/config.h memtest86+-5.01/config.h
--- memtest86+-5.01_/config.h	2014-06-25 22:57:47.893476783 +0100
+++ memtest86+-5.01/config.h	2014-06-25 22:59:01.269840630 +0100
@@ -17,7 +17,7 @@
 #define CONSERVATIVE_SMP 1
 
 /* BEEP_MODE - Beep on error. Default off, Change to 1 to enable */
-#define BEEP_MODE 0
+#define BEEP_MODE 1
 
 /* BEEP_END_NO_ERROR - Beep at end of each pass without error. Default off, Change to 1 to enable */
 #define BEEP_END_NO_ERROR 0
@@ -29,13 +29,13 @@
 /* SERIAL_CONSOLE_DEFAULT -  The default state of the serial console. */
 /*	This is normally off since it slows down testing.  Change to a 1 */
 /*	to enable. */
-#define SERIAL_CONSOLE_DEFAULT 0
+#define SERIAL_CONSOLE_DEFAULT 1
 
 /* SERIAL_TTY - The default serial port to use. 0=ttyS0, 1=ttyS1 */ 
 #define SERIAL_TTY 0
 
 /* SERIAL_BAUD_RATE - Baud rate for the serial console */
-#define SERIAL_BAUD_RATE 9600
+#define SERIAL_BAUD_RATE 115200
 
 /* SCRN_DEBUG - extra check for SCREEN_BUFFER
  */ 
diff -rupN memtest86+-5.01_/Makefile memtest86+-5.01/Makefile
--- memtest86+-5.01_/Makefile	2014-06-25 22:57:47.893476783 +0100
+++ memtest86+-5.01/Makefile	2014-06-25 22:59:19.237929751 +0100
@@ -21,7 +21,7 @@ OBJS= head.o reloc.o main.o test.o init.
       
 
 all: clean memtest.bin memtest 
-		 scp memtest.bin root@192.168.0.12:/srv/tftp/mt86plus
+#		 scp memtest.bin root@192.168.0.12:/srv/tftp/mt86plus
 
 # Link it statically once so I know I don't have undefined
 # symbols and then link it dynamically so I have full