docs/hcl/gm45_remove_me.html: prioritize changing mac address

1 files changed, 15 insertions, 15 deletions

diff --git a/docs/hcl/gm45_remove_me.html b/docs/hcl/gm45_remove_me.html
index cec55b6c..8be4deb9 100644
--- a/docs/hcl/gm45_remove_me.html
+++ b/docs/hcl/gm45_remove_me.html
@@ -48,7 +48,7 @@
 				a deblobbed descriptor+gbe image for GM45 targets. ich9gen is a small utility within
 				ich9deblob that can generate them from scratch, without a factory.bin dump.
 			</p>
-			
+				
 			<p>
 				Run:<br/>
 				$ <b>./ich9gen</b>
@@ -65,6 +65,20 @@
 			</p>
 			
 			<p>
+				You can find out your MAC address from <b>ip addr</b> or <b>ifconfig</b> in GNU/Linux. 
+				Alternatively, if you are running libreboot already (with the correct MAC address in your
+				ROM), dump it (flashrom -r) and read the first 6 bytes from position 0x1000 (or 0x2000) in a hex editor
+				(or, rename it to factory.rom and run it in ich9deblob: in the newly created mkgbe.c
+				will be the individual bytes of your MAC address). If you are currently running the stock firmware
+				and haven't installed libreboot yet, you can also run that through ich9deblob to get the mac address.
+			</p>
+			
+			<p>
+				An even simpler way to get the MAC address would be to read what's on the little sticker on
+				the bottom/base of the laptop.
+			</p>
+			
+			<p>
 				On GM45 laptops that use flash descriptors, the MAC address
 				or the onboard ethernet chipset is flashed (inside the ROM image).
 				You should generate a descriptor+gbe image with your own MAC address
@@ -82,20 +96,6 @@
 				</ul>
 			
 			<p>
-				You can find out your MAC address from <b>ip addr</b> or <b>ifconfig</b> in GNU/Linux. 
-				Alternatively, if you are running libreboot already (with the correct MAC address in your
-				ROM), dump it (flashrom -r) and read the first 6 bytes from position 0x1000 (or 0x2000) in a hex editor
-				(or, rename it to factory.rom and run it in ich9deblob: in the newly created mkgbe.c
-				will be the individual bytes of your MAC address). If you are currently running the stock firmware
-				and haven't installed libreboot yet, you can also run that through ich9deblob to get the mac address.
-			</p>
-			
-			<p>
-				An even simpler way to get the MAC address would be to read what's on the little sticker on
-				the underside. (on the X200, this would be near the VGA port).
-			</p>
-			
-			<p>
 				A bash script is also included in libreboot_util which will change the mac address (using ich9gen)
 				on all GM45 ROM images. For instance:<br/>
 				$ <b>./ich9macchange path/to/libreboot.rom XX:XX:XX:XX:XX:XX romsize</b><br/>