link to french version of gplv3 at the top of i18n/fr_FR/COPYING . Also, we remove files that we haven't translated yet, it weights a lot.

1 files changed, 0 insertions, 132 deletions

diff --git a/i18n/fr_FR/resources/grub/config/menuentries/common.cfg b/i18n/fr_FR/resources/grub/config/menuentries/common.cfg
deleted file mode 100644
index 59e1e32e..00000000
--- a/i18n/fr_FR/resources/grub/config/menuentries/common.cfg
+++ /dev/null
@@ -1,132 +0,0 @@
-function try_user_config {
-	set root="${1}"
-	for dir in boot grub grub2 boot/grub boot/grub2; do
-		for name in libreboot_ autoboot_ librecore_ coreboot_ ''; do
-			if [ -f /"${dir}"/"${name}"grub.cfg ]; then
-                unset superusers
-				configfile /"${dir}"/"${name}"grub.cfg
-			fi
-		done
-	done
-}
-function search_grub {
-	for i in 0 1; do
-		# raw devices
-		try_user_config "(${1}${i})"
-		for part in 1 2 3 4 5; do
-			# MBR/GPT partitions
-			try_user_config "(${1}${i},${part})"
-		done
-	done
-}
-function try_isolinux_config {
-	set root="${1}"
-	for dir in '' /boot; do
-		if [ -f "${dir}"/isolinux/isolinux.cfg ]; then
-			syslinux_configfile -i "${dir}"/isolinux/isolinux.cfg
-		elif [ -f "${dir}"/syslinux/syslinux.cfg ]; then
-			syslinux_configfile -s "${dir}"/syslinux/syslinux.cfg
-		fi
-	done
-}
-function search_isolinux {
-	for i in 0 1; do
-		# raw devices
-		try_isolinux_config "(${1}${i})"
-		for part in 1 2 3 4 5; do
-			# MBR/GPT partitions
-			try_isolinux_config "(${1}${i},${part})"
-		done
-	done
-}
-menuentry 'Load Operating System (incl. fully encrypted disks)  [o]' --hotkey='o' {
-# GRUB2 handles (almost) every possible disk setup, but only the location of
-# /boot is actually important since GRUB2 only loads the user's config.
-
-# LVM, RAID, filesystems and encryption on both raw devices and partitions in
-# all various combinations need to be supported. Since full disk encryption is
-# possible with GRUB2 as payload and probably even used by most users, this
-# configuration tries to load the operating system in the following way:
-
-# 1. Look for user configuration on unencrypted devices first to avoid
-# unnecessary decryption routines in the following order:
-
-#	1) raw devices and MBR/GPT partitions
-	search_grub ahci
-    search_grub ata
-#	2) LVM and RAID which might be used accross multiple devices
-	lvm="lvm/matrix-rootvol lvm/matrix-boot"
-	raid="md/0 md/1 md/2 md/3 md/4 md/5 md/6 md/7 md/8 md/9"
-	for vol in ${lvm} ${raid}; do
-		try_user_config "(${vol})"
-	done
-# 2. In case no configuration could be found, try decrypting devices. Look
-# on raw crypto devices as well as inside LVM volumes this time.
-
-#	The user will be prompted for a passphrase if a LUKS header was found.
-	for dev usb1 usb0 ahci1 ahci0 ata1 ata0 ${lvm}; do
-		cryptomount "(${dev})"
-	done
-#	3) encrypted devices/partitions
-	for i in 1 0; do
-		for part in 1 2 3 4 5; do
-            for type in usb ahci ata; do
-    			cryptomount "(${type}${i},${part})"
-            done
-		done
-	done
-
-#	3) encrypted devices/partitions
-	search_grub crypto
-#	4) LVM inside LUKS containers
-	for vol in ${lvm}; do
-		try_user_config "(${vol})"
-	done
-
-    # Last resort, if all else fails
-    set root=ahci0,1
-    for p in / /boot/; do
-        if [ -f "${p}vmlinuz" ]; then
-            linux ${p}vmlinuz root=/dev/sda1 rw
-            if [ -f "${p}initrd.img" ]; then
-                initrd ${p}initrd.img
-            fi
-        fi
-    done
-
-    # Last resort (for GA-G41-ES2L which uses IDE emulation mode for SATA)
-    set root=ata0,1
-    for p in / /boot/; do
-        if [ -f "${p}vmlinuz" ]; then
-            linux ${p}vmlinuz root=/dev/sda1 rw
-            if [ -f "${p}initrd.img" ]; then
-                initrd ${p}initrd.img
-            fi
-        fi
-    done
-}
-menuentry 'Search ISOLINUX menu (AHCI)  [a]' --hotkey='a' {
-	search_isolinux ahci
-}
-menuentry 'Search ISOLINUX menu (USB)  [u]' --hotkey='u' {
-	search_isolinux usb
-}
-menuentry 'Search ISOLINUX menu (CD/DVD)  [d]' --hotkey='d' {
-	insmod ata
-	for dev in ata0 ata1 ata2 ata3 ahci1; do
-		try_isolinux_config "(${dev})"
-	done
-}
-menuentry 'Load test configuration (grubtest.cfg) inside of CBFS  [t]' --hotkey='t' {
-	set root='(cbfsdisk)'
-	configfile /grubtest.cfg
-}
-menuentry 'Search for GRUB2 configuration on external media  [s]' --hotkey='s' {
-	search_grub usb
-}
-menuentry 'Poweroff  [p]' --hotkey='p' {
-	halt
-}
-menuentry 'Reboot  [r]' --hotkey='r' {
-	reboot
-}