KGPE-D16: update patch set (also update coreboot and vboot)

Also contains other fixes from coreboot, like:
* 551cff0 Derive lvds_dual_channel from EDID timings.
^ makes single/dual channel LVDS selection on GM45 automatic
* 26fc544 lenovo/t60: Enable native intel gfx init.
^ was being maintained in libreboot, now upstreamed so not needed

Framebuffer mode was disabled for the KGPE-D16, because only
text-mode works at the moment.

1 files changed, 85 insertions, 0 deletions

diff --git a/resources/libreboot/patch/kgpe-d16/0057-southbridge-amd-sr5650-Fix-GPP3a-link-training-in-hi.patch b/resources/libreboot/patch/kgpe-d16/0057-southbridge-amd-sr5650-Fix-GPP3a-link-training-in-hi.patch
new file mode 100644
index 00000000..dc2ad905
--- /dev/null
+++ b/resources/libreboot/patch/kgpe-d16/0057-southbridge-amd-sr5650-Fix-GPP3a-link-training-in-hi.patch
@@ -0,0 +1,85 @@
+From c6ad4c2dc41378273147690741de931ca2f292f5 Mon Sep 17 00:00:00 2001
+From: Timothy Pearson <tpearson@raptorengineeringinc.com>
+Date: Fri, 12 Jun 2015 19:43:38 -0500
+Subject: [PATCH 057/139] southbridge/amd/sr5650: Fix GPP3a link training in
+ higher width modes
+
+Change-Id: I7503ae42eb8bc91411413ef2cc7e7a723df7091a
+Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
+---
+ src/southbridge/amd/sr5650/pcie.c | 51 ++++++++++++++++++++++++++++++++++++---
+ 1 file changed, 47 insertions(+), 4 deletions(-)
+
+diff --git a/src/southbridge/amd/sr5650/pcie.c b/src/southbridge/amd/sr5650/pcie.c
+index d306b5a..79f2a5f 100644
+--- a/src/southbridge/amd/sr5650/pcie.c
++++ b/src/southbridge/amd/sr5650/pcie.c
+@@ -249,7 +249,7 @@ static void switching_gpp3a_configurations(device_t nb_dev, device_t sb_dev)
+ 		reg |= 0xFF0BAA0;
+ 		break;
+ 	default:	/* shouldn't be here. */
+-		printk(BIOS_DEBUG, "Warning:gpp3a_configuration is not correct. Check you devicetree.cb\n");
++		printk(BIOS_DEBUG, "Warning:gpp3a_configuration is not correct. Check your devicetree.cb\n");
+ 		break;
+ 	}
+ 	nbmisc_write_index(nb_dev, 0x26, reg);
+@@ -722,10 +722,53 @@ void sr5650_gpp_sb_init(device_t nb_dev, device_t dev, u32 port)
+ 
+ 		/* check port enable */
+ 		if (cfg->port_enable & (1 << port)) {
+-			PcieReleasePortTraining(nb_dev, dev, port);
++			uint32_t hw_port = port;
++			switch (cfg->gpp3a_configuration) {
++			case 0x1: /* 4:2:0:0:0:0 */
++				if (hw_port == 9)
++					hw_port = 4 + 1;
++				break;
++			case 0x2: /* 4:1:1:0:0:0 */
++				if (hw_port == 9)
++					hw_port = 4 + 1;
++				else if (hw_port == 10)
++					hw_port = 4 + 2;
++				break;
++			case 0xc: /* 2:2:2:0:0:0 */
++				if (hw_port == 6)
++					hw_port = 4 + 1;
++				else if (hw_port == 9)
++					hw_port = 4 + 2;
++				break;
++			case 0xa: /* 2:2:1:1:0:0 */
++				if (hw_port == 6)
++					hw_port = 4 + 1;
++				else if (hw_port == 9)
++					hw_port = 4 + 2;
++				else if (hw_port == 10)
++					hw_port = 4 + 3;
++				break;
++			case 0x4: /* 2:1:1:1:1:0 */
++				if (hw_port == 6)
++					hw_port = 4 + 1;
++				else if (hw_port == 7)
++					hw_port = 4 + 2;
++				else if (hw_port == 9)
++					hw_port = 4 + 3;
++				else if (hw_port == 10)
++					hw_port = 4 + 4;
++				break;
++			case 0xb: /* 1:1:1:1:1:1 */
++				break;
++			default:  /* shouldn't be here. */
++				printk(BIOS_WARNING, "invalid gpp3a_configuration\n");
++				return;
++			}
++			PcieReleasePortTraining(nb_dev, dev, hw_port);
+ 			if (!(AtiPcieCfg.Config & PCIE_GPP_COMPLIANCE)) {
+-				u8 res = PcieTrainPort(nb_dev, dev, port);
+-				printk(BIOS_DEBUG, "PcieTrainPort port=0x%x result=%d\n", port, res);
++				u8 res = PcieTrainPort(nb_dev, dev, hw_port);
++				printk(BIOS_DEBUG, "PcieTrainPort port=0x%x hw_port=0x%x result=%d\n",
++					port, hw_port, res);
+ 				if (res) {
+ 					AtiPcieCfg.PortDetect |= 1 << port;
+ 				} else {
+-- 
+1.9.1
+