KGPE-D16: update patch set (also update coreboot and vboot)

Also contains other fixes from coreboot, like:
* 551cff0 Derive lvds_dual_channel from EDID timings.
^ makes single/dual channel LVDS selection on GM45 automatic
* 26fc544 lenovo/t60: Enable native intel gfx init.
^ was being maintained in libreboot, now upstreamed so not needed

Framebuffer mode was disabled for the KGPE-D16, because only
text-mode works at the moment.

1 files changed, 0 insertions, 163 deletions

diff --git a/resources/libreboot/patch/kgpe-d16/0070-southbridge-amd-sb700-Fix-random-persistent-SATA-AHC.patch b/resources/libreboot/patch/kgpe-d16/0070-southbridge-amd-sb700-Fix-random-persistent-SATA-AHC.patch
deleted file mode 100644
index 536823e2..00000000
--- a/resources/libreboot/patch/kgpe-d16/0070-southbridge-amd-sb700-Fix-random-persistent-SATA-AHC.patch
+++ /dev/null
@@ -1,163 +0,0 @@
-From ca61ec33fb6c8f3eab823d6fa5415c6775b48192 Mon Sep 17 00:00:00 2001
-From: Timothy Pearson <kb9vqf@pearsoncomputing.net>
-Date: Mon, 22 Jun 2015 20:57:39 -0500
-Subject: [PATCH 070/146] southbridge/amd/sb700: Fix random persistent SATA
- AHCI drive detection failure
-
----
- src/southbridge/amd/sb700/sata.c |   81 ++++++++++++++++++++------------------
- 1 file changed, 42 insertions(+), 39 deletions(-)
-
-diff --git a/src/southbridge/amd/sb700/sata.c b/src/southbridge/amd/sb700/sata.c
-index da6f107..c3efd4a 100644
---- a/src/southbridge/amd/sb700/sata.c
-+++ b/src/southbridge/amd/sb700/sata.c
-@@ -125,7 +125,6 @@ static void sata_init(struct device *dev)
- 	uint8_t sata_alpm_enable;
- 	uint8_t port_count;
- 	uint8_t max_port_count;
--	uint8_t hba_reset_count;
- 	uint8_t ide_io_enabled;
- 	uint8_t ide_legacy_io_enabled;
- 
-@@ -141,14 +140,20 @@ static void sata_init(struct device *dev)
- 	/* SATA SMBus Disable */
- 	sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
- 
--	hba_reset_count = 0;
--
--retry_init:
-+	/* WARNING
-+	 * Enabling the SATA link latency enhancement (SMBUS 0xAD bit 5)
-+	 * causes random persistent drive detection failures until it is cleared,
-+	 * with the probabability of detection failure rising exponentially with
-+	 * the number of drives attached to the controller!
-+	 * This happens on Rev15 H/W.
-+	 * Do NOT follow the RPR advice; leave this bit set at all times...
-+	 */
- 	byte = pci_read_config8(sm_dev, 0xad);
- 	/* Disable SATA SMBUS */
- 	byte |= (1 << 1);
- 	/* Enable SATA and power saving */
- 	byte |= (1 << 0);
-+	/* Disable link latency enhancement */
- 	byte |= (1 << 5);
- 	pci_write_config8(sm_dev, 0xad, byte);
- 
-@@ -163,15 +168,6 @@ retry_init:
- 
- 	printk(BIOS_SPEW, "rev_id=%x\n", rev_id);
- 
--	if (sata_ahci_mode) {
--		/* Enable link latency enhancement on A14 and above */
--		if (rev_id >= 0x14) {
--			byte = pci_read_config8(sm_dev, 0xad);
--			byte &= ~(1 << 5);
--			pci_write_config8(sm_dev, 0xad, byte);
--		}
--	}
--
- 	/* Enable combined mode */
- 	byte = pci_read_config8(sm_dev, 0xad);
- 	byte |= (1 << 3);
-@@ -285,6 +281,17 @@ retry_init:
- 		write32(sata_bar5 + 0xfc, dword);
- 	}
- 
-+	/* Enable SATA ports */
-+	byte = pci_read_config8(dev, 0x42);
-+	if (max_port_count <= 6) {
-+		byte |= 0x3f;
-+		for (i = 0; i < max_port_count; i++)
-+			byte &= ~(0x1 << i);
-+	} else {
-+		byte &= ~0x3f;
-+	}
-+	pci_write_config8(dev, 0x42, byte);
-+
- 	if (sata_ahci_mode) {
- 		/* FIXME
- 		* SeaBIOS does not know how to spin
-@@ -306,6 +313,9 @@ retry_init:
- 		write32(sata_bar5 + 0x04, dword);
- 	}
- 
-+	sb7xx_51xx_setup_sata_phys(dev);
-+	sb7xx_51xx_setup_sata_port_indication(sata_bar5);
-+
- 	/* Write protect Sub-Class Code */
- 	byte = pci_read_config8(dev, 0x40);
- 	byte &= ~(1 << 0);
-@@ -331,7 +341,7 @@ retry_init:
- 	else {
- 		dword &= ~(1 << 24 | 1 << 21); /* A14 and above */
- 		dword &= ~0xFF80; /* 15:7 */
--		dword |= 1 << 15 | 0x7F << 7;
-+		dword |= 1 << 15 | 0x7F << 7 | 1 << 6;
- 	}
- 	pci_write_config32(dev, 0x48, dword);
- 
-@@ -339,9 +349,6 @@ retry_init:
- 	byte = 0x10;
- 	pci_write_config8(dev, 0x46, byte);
- 
--	sb7xx_51xx_setup_sata_phys(dev);
--	sb7xx_51xx_setup_sata_port_indication(sata_bar5);
--
- 	/* Enable the I/O, MM, BusMaster access for SATA */
- 	byte = pci_read_config8(dev, 0x4);
- 	byte |= 7 << 0;
-@@ -426,32 +433,28 @@ retry_init:
- 				if (i < 4)
- 					current_bar = ((i / 2) == 0) ? sata_bar0 : sata_bar2;
- 				else
--					current_bar = ide_bar0;
-+					current_bar = (pci_read_config8(sm_dev, 0xad) & (0x1 << 4))
-+						? ide_bar2 : ide_bar0;
- 				ret = sata_drive_detect(i, current_bar);
- 				if (ret == 0) {
- 					break;
- 				} else if (ret == 2) {
--					/* Reset PHY logic */
--					word = pci_read_config16(dev, 0x84);
--					word &= ~(0x1 << 2);
--					word |= 0x1f8;
--					pci_write_config16(dev, 0x84, word);
--
--					/* Disable SATA controller */
--					byte = pci_read_config8(sm_dev, 0xad);
--					byte &= ~(1 << 0);
--					byte &= ~(1 << 3);
--					pci_write_config8(sm_dev, 0xad, byte);
--
--					mdelay(100);
--
--					/* Retry initialization */
--					hba_reset_count++;
--					if (hba_reset_count < 16)
--						goto retry_init;
--					else
--						printk(BIOS_WARNING, "HBA reset count exceeded, "
--							"continuing but AHCI drives may not function\n");
-+					/* Read in Port-N Serial ATA Control Register */
-+					byte = read8(sata_bar5 + 0x12C + 0x80 * i);
-+
-+					/* Set Reset Bit */
-+					byte |= 0x1;
-+					write8((sata_bar5 + 0x12C + 0x80 * i), byte);
-+
-+					/* Wait 1000ms */
-+					mdelay(1000);
-+
-+					/* Clear Reset Bit */
-+					byte &= ~0x01;
-+					write8((sata_bar5 + 0x12C + 0x80 * i), byte);
-+
-+					/* Wait 1ms */
-+					mdelay(1);
- 				}
- 			}
- 			if (sata_ahci_mode)
--- 
-1.7.9.5
-