5 files changed, 8 insertions, 8 deletions
diff --git a/docs/gnulinux/configuring_parabola.md b/docs/gnulinux/configuring_parabola.md
index 1e525f59..935ff099 100644
--- a/docs/gnulinux/configuring_parabola.md
+++ b/docs/gnulinux/configuring_parabola.md
@@ -63,7 +63,7 @@ For more information related to `pacman`, review the following articles on the A
 
 *    [Configuring pacman](https://wiki.parabolagnulinux.org/Installation_Guide#Configure_pacman)
 *    [Using pacman](https://wiki.archlinux.org/index.php/Pacman)
-*    [Additional Repositories](https://wiki.parabolagnulinux.org/Official_Repositories>)
+*    [Additional Repositories](https://wiki.parabolagnulinux.org/Official_Repositories)
 
 ## Updating Parabola
 Parabola is kept up-to-date, using `pacman`. When you are updating Parabola,
diff --git a/docs/gnulinux/encrypted_parabola.md b/docs/gnulinux/encrypted_parabola.md
index 74c74fce..8de6ca0a 100644
--- a/docs/gnulinux/encrypted_parabola.md
+++ b/docs/gnulinux/encrypted_parabola.md
@@ -102,7 +102,7 @@ You can either fill the header with zeroes, or with random data; again, I chose
 Also, if you're using an SSD, there are a two things you should keep in mind:
 
 -    There are issues with TRIM; it's not enabled by default through LUKS,
-and there are security issues, if you do enable it. See [this page](https://wiki.archlinux.org/index.php/Dm-cryptSpecialties#Discard.2FTRIM_support_for_solid_state_drives_.28SSD.29) for more info.
+and there are security issues, if you do enable it. See [this page](https://wiki.archlinux.org/index.php/Dm-crypt#Specialties) for more info.
 -    Make sure to read [this article](https://wiki.archlinux.org/index.php/Solid_State_Drives),
 for information on managing SSD's in Arch Linux (the information applies to Parabola, as well).
 
@@ -114,7 +114,7 @@ We'll begin by creating a single, large partition on it, and then encrypting it
 You will need the `device-mapper` kernel module during the installation;
 this will enable us to set up our encrypted disk. To load it, use the following command:
 
-    # modprobe dm-mod
+    # modprobe dm_mod
 
 We then need to select the **device name** of the drive we're installing the operating system on;
 see the above method, if needed, for figuring out device names.
@@ -381,7 +381,7 @@ for the LUKS passphrase, apply here as well. You will set this password with the
 
 ### Extra Security Tweaks
 There are some final changes that we can make to the installation, to make it
-significantly more secure; these are based on the [Security](https://wiki.archlinux.org/index.php/Securit) section of the Arch wiki.
+significantly more secure; these are based on the [Security](https://wiki.archlinux.org/index.php/Security) section of the Arch wiki.
 
 #### Key Strengthening
 We will want to open the configuration file for password settings, and increase
@@ -422,7 +422,7 @@ Edit configuration in `/etc/default/grub`, remembering to use UUID when poitning
 Use `blkid` to get list of devices with their respective UUIDs.
 Next generate grub.cfg with
 
-    # grub-mkconfig /boot/grub/grub.cfg
+    # grub-mkconfig -o /boot/grub/grub.cfg
     
 If you have separate `/boot` partition, don't forget to add `boot` symlink inside that points to current directory
 
diff --git a/docs/gnulinux/grub_boot_installer.md b/docs/gnulinux/grub_boot_installer.md
index 7086b71d..7d4375e6 100644
--- a/docs/gnulinux/grub_boot_installer.md
+++ b/docs/gnulinux/grub_boot_installer.md
@@ -25,7 +25,7 @@ Overwrite the drive, writing your distro ISO to it with `dd`. For example, if we
 That's it! You should now be able to boot the installer from your USB drive (the instructions for doing so will be given later).
 
 ## Prepare the USB drive in NetBSD
-[This page](https://wiki.netbsd.org/tutorials how_to_install_netbsd_from_an_usb_memory_stick/) on the NetBSD website shows how to create a NetBSD bootable USB drive, from within NetBSD itself. You should the `dd` method documented there. This will work with any GNU+Linux ISO image.
+[This page](https://wiki.netbsd.org/tutorials/how_to_install_netbsd_from_an_usb_memory_stick/) on the NetBSD website shows how to create a NetBSD bootable USB drive, from within NetBSD itself. You should the `dd` method documented there. This will work with any GNU+Linux ISO image.
 
 ## Prepare the USB drive in FreeBSD
 [This page](https://www.freebsd.org/doc/handbook/bsdinstall-pre.html) on the FreeBSD website shows how to create a bootable USB drive for installing FreeBSD. Use the `dd` method documented. This will work with any GNU+Linux ISO image.
diff --git a/docs/gnulinux/grub_cbfs.md b/docs/gnulinux/grub_cbfs.md
index 4879d9cf..2e68cb0b 100644
--- a/docs/gnulinux/grub_cbfs.md
+++ b/docs/gnulinux/grub_cbfs.md
@@ -241,7 +241,7 @@ the main storage for **/boot/grub/libreboot\_grub.cfg** or **/grub/libreboot\_gr
 
 Therefore, we need to either copy **libreboot\_grub.cfg** to **/grub**, or to **/boot/grub**:
 
-    $ sudo cp ~/Downloads/libreboot_util/cbfstool/x86_64/grubtest.cfg /boot/grub    # or /grub
+    $ sudo cp ~/Downloads/libreboot_util/cbfstool/x86_64/libreboot_grub.cfg /boot/grub    # or /grub
 
 Now, the next time we boot our computer, GRUB (in Libreboot) will automatically switch
 to this configuration file. *This means that you do not have to re-flash,
diff --git a/docs/gnulinux/grub_hardening.md b/docs/gnulinux/grub_hardening.md
index 9eb7237e..e1329f21 100644
--- a/docs/gnulinux/grub_hardening.md
+++ b/docs/gnulinux/grub_hardening.md
@@ -33,7 +33,7 @@ Helpful links:
 
 -   [GRUB manual](https://www.gnu.org/software/grub/manual/html_node/Security.html#Security)
 -   [GRUB info pages](http://git.savannah.gnu.org/cgit/grub.git/tree/docs/grub.texi)
--   [SATA connected storage considered dangerous.](../../faq.md#firmware-hddssd)
+-   [SATA connected storage considered dangerous.](../../faq.md#hddssd-firmware)
 -   [Coreboot GRUB security howto](https://www.coreboot.org/GRUB2#Security)
 
 GRUB Password