diff options
Diffstat (limited to 'docs/hardware/t60_heatsink.md')
| -rw-r--r-- | docs/hardware/t60_heatsink.md | 112 |
1 files changed, 0 insertions, 112 deletions
diff --git a/docs/hardware/t60_heatsink.md b/docs/hardware/t60_heatsink.md deleted file mode 100644 index ef4502f5..00000000 --- a/docs/hardware/t60_heatsink.md +++ /dev/null @@ -1,112 +0,0 @@ -% Changing heatsink (or CPU) on the ThinkPad T60 - -Using this guide you can also change/upgrade the CPU. - -[Back to previous index](./) - -Hardware requirements {#hardware_requirements} -===================== - -- rubbing alcohol or isopropyl alcohol, and thermal compound for - changing CPU heatsink (procedure involves removing heatsink) - -- thermal compound/paste (Arctic MX-4 is good. Others are also good.) - -Software requirements {#software_requirements} -===================== - -- xsensors -- stress - -Disassembly {#recovery} -=========== - -Remove those screws and remove the HDD:\ -  - -Lift off the palm rest:\ - - -Lift up the keyboard, pull it back a bit, flip it over like that and -then disconnect it from the board:\ -  - - -Gently wedge both sides loose:\ -  - -Remove that cable from the position:\ -  - -Remove the bezel (sorry forgot to take pics). - -On the CPU (and there is another chip south-east to it, sorry forgot to -take pic) clean off the old thermal paste (with the alcohol) and apply -new (Artic Silver 5 is good, others are good too) you should also clean -the heatsink the same way\ - - -This is also an opportunity to change the CPU to another one. For -example if you had a Core Duo T2400, you can upgrade it to a better -processor (higher speed, 64-bit support). A Core 2 Duo T7600 was -installed here. - -Attach the heatsink and install the screws (also, make sure to install -the AC jack as highlighted):\ - - -Reinstall that upper bezel:\ - - -Do that:\ -  - -Attach keyboard:\ - - -Place keyboard and (sorry, forgot to take pics) reinstall the palmrest -and insert screws on the underside:\ - - -It lives!\ -  - - -Always stress test ('stress -c 2' and xsensors. below 90C is ok) when -replacing cpu paste/heatsink:\ - - -Copyright © 2014, 2015 Leah Rowe <info@minifree.org>\ -Permission is granted to copy, distribute and/or modify this document -under the terms of the Creative Commons Attribution-ShareAlike 4.0 -International license or any later version published by Creative -Commons; A copy of the license can be found at -[../cc-by-sa-4.0.txt](../cc-by-sa-4.0.txt) - -Updated versions of the license (when available) can be found at -<https://creativecommons.org/licenses/by-sa/4.0/legalcode> - -UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT -POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND -AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND -CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, -OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, -MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, -ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE -OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF -WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT -APPLY TO YOU. - -TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU -ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR -OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, -PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES -ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN -IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, -COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT -ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU. - -The disclaimer of warranties and limitation of liability provided above -shall be interpreted in a manner that, to the extent possible, most -closely approximates an absolute disclaimer and waiver of all liability. - |