diff options
Diffstat (limited to 'docs/hcl/gm45_remove_me.md')
| -rw-r--r-- | docs/hcl/gm45_remove_me.md | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/docs/hcl/gm45_remove_me.md b/docs/hcl/gm45_remove_me.md index 19719476..350e048c 100644 --- a/docs/hcl/gm45_remove_me.md +++ b/docs/hcl/gm45_remove_me.md @@ -41,7 +41,7 @@ factory.bin dump. ich9gen executables can be found under ./ich9deblob/ statically compiled in libreboot\_util. If you are using src or git, build ich9gen from source with:\ -$ ./oldbuild module ich9deblob + $ ./oldbuild module ich9deblob The executable will appear under resources/utilities/ich9deblob/ Run:\ @@ -71,7 +71,7 @@ On GM45 laptops that use flash descriptors, the MAC address or the onboard ethernet chipset is flashed (inside the ROM image). You should generate a descriptor+gbe image with your own MAC address inside (with the Gbe checksum updated to match). Run:\ -$ ./ich9gen \--macaddress XX:XX:XX:XX:XX:XX + $ ./ich9gen \--macaddress XX:XX:XX:XX:XX:XX (replace the XX chars with the hexadecimal chars in the MAC address that you want) @@ -98,7 +98,7 @@ $ **dd if=ich9fdgbe\_4m.bin of=libreboot.rom bs=1 count=12k conv=notrunc**\ Your libreboot.rom image is now ready to be flashed on the system. Refer -back to [../install/\#flashrom](../install/#flashrom) for how to flash +back to [../install/#flashrom](../install/#flashrom) for how to flash it. Write-protecting the flash chip @@ -131,7 +131,7 @@ flashing later on; for example, see [../install/bbb\_setup.html](../install/bbb_setup.html). Change them all to 0x0, then re-compile ich9gen. After you have done -that, follow the notes in [\#ich9gen](#ich9gen) to generate a new +that, follow the notes in [#ich9gen](#ich9gen) to generate a new descriptor+gbe image and insert that into your ROM image, then flash it. The next time you boot, the flash chip will be read-only in software (hardware re-flashing will still work, which you will need for @@ -166,7 +166,7 @@ If you are working with libreboot\_src (or git), you can find the source under resources/utilities/ich9deblob/ and will already be compiled if you ran **./oldbuild module all** or **./oldbuild module ich9deblob** from the main directory (./), otherwise you can build it like so:\ -$ ./oldbuild module ich9deblob + $ ./oldbuild module ich9deblob An executable file named **ich9deblob** will now appear under resources/utilities/ich9deblob/ @@ -218,7 +218,7 @@ need for a factory.rom dump! You should now have a **libreboot.rom** image containing the correct 4K descriptor and 8K gbe regions, which will then be safe to flash. Refer -back to [../install/\#flashrom](../install/#flashrom) for how to flash +back to [../install/#flashrom](../install/#flashrom) for how to flash it. @@ -247,7 +247,7 @@ TODO: lenovobios (GM45 thinkpads) still write-protects parts of the flash. Modify the assembly code inside. Note: the factory.rom (BIOS region) from lenovobios is in a compressed format, which you have to extract. bios\_extract upstream won't work, but the following was said -in \#coreboot on freenode IRC: +in #coreboot on freenode IRC: <roxfan> vimuser: try bios_extract with ffv patch http://patchwork.coreboot.org/patch/3444/ <roxfan> or https://github.com/coreboot/bios_extract/blob/master/phoenix_extract.py |