diff options
Diffstat (limited to 'docs/hcl')
| -rw-r--r-- | docs/hcl/gm45_remove_me.md | 30 | ||||
| -rw-r--r-- | docs/hcl/index.md | 4 | ||||
| -rw-r--r-- | docs/hcl/kgpe-d16.md | 6 | ||||
| -rw-r--r-- | docs/hcl/t500.md | 4 | ||||
| -rw-r--r-- | docs/hcl/x200.md | 6 |
5 files changed, 25 insertions, 25 deletions
diff --git a/docs/hcl/gm45_remove_me.md b/docs/hcl/gm45_remove_me.md index 58a4638e..41288307 100644 --- a/docs/hcl/gm45_remove_me.md +++ b/docs/hcl/gm45_remove_me.md @@ -41,11 +41,11 @@ factory.bin dump. ich9gen executables can be found under ./ich9deblob/ statically compiled in libreboot\_util. If you are using src or git, build ich9gen from source with:\ -\$ **./oldbuild module ich9deblob**\ +$ **./oldbuild module ich9deblob**\ The executable will appear under resources/utilities/ich9deblob/ Run:\ -\$ **./ich9gen** +$ **./ich9gen** Running ich9gen this way (without any arguments) generates a default descriptor+gbe image with a generic MAC address. You probably don't @@ -71,7 +71,7 @@ On GM45 laptops that use flash descriptors, the MAC address or the onboard ethernet chipset is flashed (inside the ROM image). You should generate a descriptor+gbe image with your own MAC address inside (with the Gbe checksum updated to match). Run:\ -\$ **./ich9gen \--macaddress XX:XX:XX:XX:XX:XX**\ +$ **./ich9gen \--macaddress XX:XX:XX:XX:XX:XX**\ (replace the XX chars with the hexadecimal chars in the MAC address that you want) @@ -88,13 +88,13 @@ Assuming that your libreboot image is named **libreboot.rom**, copy the file to where **libreboot.rom** is located and then insert the descriptor+gbe file into the ROM image.\ For 16MiB flash chips:\ -\$ **dd if=ich9fdgbe\_16m.bin of=libreboot.rom bs=1 count=12k +$ **dd if=ich9fdgbe\_16m.bin of=libreboot.rom bs=1 count=12k conv=notrunc**\ For 8MiB flash chips:\ -\$ **dd if=ich9fdgbe\_8m.bin of=libreboot.rom bs=1 count=12k +$ **dd if=ich9fdgbe\_8m.bin of=libreboot.rom bs=1 count=12k conv=notrunc**\ For 4MiB flash chips:\ -\$ **dd if=ich9fdgbe\_4m.bin of=libreboot.rom bs=1 count=12k +$ **dd if=ich9fdgbe\_4m.bin of=libreboot.rom bs=1 count=12k conv=notrunc**\ Your libreboot.rom image is now ready to be flashed on the system. Refer @@ -125,7 +125,7 @@ for the following lines: NOTE: When you write-protect the flash chip, re-flashing is no longer possible unless you use dedicated external equipment, which also means disassembling the laptop. The same equipment can also be used to remove -the write-protection later on, if you choose to do so. \*Only\* +the write-protection later on, if you choose to do so. *Only* write-protect the chip if you have the right equipment for external flashing later on; for example, see [../install/bbb\_setup.html](../install/bbb_setup.html). @@ -166,7 +166,7 @@ If you are working with libreboot\_src (or git), you can find the source under resources/utilities/ich9deblob/ and will already be compiled if you ran **./oldbuild module all** or **./oldbuild module ich9deblob** from the main directory (./), otherwise you can build it like so:\ -\$ **./oldbuild module ich9deblob**\ +$ **./oldbuild module ich9deblob**\ An executable file named **ich9deblob** will now appear under resources/utilities/ich9deblob/ @@ -178,7 +178,7 @@ Place the factory.rom from your system (can be obtained using the external flashing guides for GM45 targets linked [../install/](../install/)) in the directory where you have your ich9deblob executable, then run the tool:\ -\$ **./ich9deblob** +$ **./ich9deblob** A 12kiB file named **deblobbed\_descriptor.bin** will now appear. **Keep this and the factory.rom stored in a safe location!** The first 4KiB @@ -195,11 +195,11 @@ Intel. Only the Intel NICs need a GbE region in the flash chip. Assuming that your libreboot image is named **libreboot.rom**, copy the **deblobbed\_descriptor.bin** file to where **libreboot.rom** is located and then run:\ -\$ **dd if=deblobbed\_descriptor.bin of=libreboot.rom bs=1 count=12k +$ **dd if=deblobbed\_descriptor.bin of=libreboot.rom bs=1 count=12k conv=notrunc** Alternatively, if you got a the **deblobbed\_4kdescriptor.bin** file (no -GbE defined), do this: \$ **dd if=deblobbed\_4kdescriptor.bin +GbE defined), do this: $ **dd if=deblobbed\_4kdescriptor.bin of=libreboot.rom bs=1 count=4k conv=notrunc** The utility will also generate 4 additional files: @@ -234,12 +234,12 @@ descriptor locks some regions. The idea is that doing this will remove all of those restrictions. Simply run (with factory.rom in the same directory):\ -\$ **./demefactory** +$ **./demefactory** It will generate a 4KiB descriptor file (only the descriptor, no GbE). Insert that into a factory.rom image (NOTE: do this on a copy of it. Keep the original factory.rom stored safely somewhere):\ -\$ **dd if=demefactory\_4kdescriptor.bin of=factory\_nome.rom bs=1 +$ **dd if=demefactory\_4kdescriptor.bin of=factory\_nome.rom bs=1 count=4k conv=notrunc** TODO: test this.\ @@ -423,7 +423,7 @@ The first part is the MAC address set to all 0x1F. It's repeated haly way through the 8K area, and the rest is all 0xFF. This is all documented in the datasheet. -The GBe region starts at 0x20A000 bytes from the \*end\* of a factory +The GBe region starts at 0x20A000 bytes from the *end* of a factory image and is 0x2000 bytes long. In libreboot (deblobbed) the descriptor is set to put gbe directly after the initial 4K flash descriptor. So the first 4K of the ROM is the descriptor, and then the next 8K is the gbe @@ -449,7 +449,7 @@ regions match BABA, however. By default, the X200 (as shipped by Lenovo) actually has an invalid main gbe checksum. The backup gbe region is correct, and is what these systems default to. Basically, you should do what you need on the -\*backup\* gbe region, and then correct the main one by copying from the +*backup* gbe region, and then correct the main one by copying from the backup. Look at resources/utilities/ich9deblob/ich9deblob.c. diff --git a/docs/hcl/index.md b/docs/hcl/index.md index 57ad4238..0c306308 100644 --- a/docs/hcl/index.md +++ b/docs/hcl/index.md @@ -439,8 +439,8 @@ the macbook2,1. They are included here in case the main site goes down for whatever reason, since they include a lot of useful information. Backups created using wget:\ -**\$ wget -m -p -E -k -K -np http://macbook.donderklumpen.de/**\ -**\$ wget -m -p -E -k -K -np +**$ wget -m -p -E -k -K -np http://macbook.donderklumpen.de/**\ +**$ wget -m -p -E -k -K -np http://macbook.donderklumpen.de/coreboot/**\ Use **-e robots=off** if using this trick for other sites and the site restricts using robots.txt diff --git a/docs/hcl/kgpe-d16.md b/docs/hcl/kgpe-d16.md index 5caf8976..891c30f4 100644 --- a/docs/hcl/kgpe-d16.md +++ b/docs/hcl/kgpe-d16.md @@ -144,8 +144,8 @@ The information here is adapted, from the ASUS website. - **Total Slots:** 16 (4-channel per CPU, 8 DIMM per CPU), ECC - **Capacity:** Maximum up to 256GB RDIMM - **Memory Type that is compatible:** - - DDR3 1600/1333/1066/800 UDIMM\* - - DDR3 1600/1333/1066/800 RDIMM\* + - DDR3 1600/1333/1066/800 UDIMM* + - DDR3 1600/1333/1066/800 RDIMM* - **Compatible sizes per memory module:** - 16GB, 8GB, 4GB, 3GB, 2GB, 1GB RDIMM - 8GB, 4GB, 2GB, 1GB UDIMM @@ -223,7 +223,7 @@ The information here is adapted, from the ASUS website. ### Note: -- \* DDR3 1600 can only be supported with AMD Opteron 6300/6200 series +- * DDR3 1600 can only be supported with AMD Opteron 6300/6200 series processor diff --git a/docs/hcl/t500.md b/docs/hcl/t500.md index 1005abfe..d4ceab13 100644 --- a/docs/hcl/t500.md +++ b/docs/hcl/t500.md @@ -82,8 +82,8 @@ The patches above are based on the output from ich9deblob on a factory.rom image dumped from the T500 with a SOIC-8 4MiB flash chip. The patch re-creates the X200 descriptor/gbe source, so the commands were something like:\ -\$ **diff -u t500gbe x200gbe**\ -\$ **diff -u t500descriptor x200descriptor** +$ **diff -u t500gbe x200gbe**\ +$ **diff -u t500descriptor x200descriptor** ME VSCC table is in a different place and a different size on the T500. Libreboot disables and removes the ME anyway, so it doesn't matter. diff --git a/docs/hcl/x200.md b/docs/hcl/x200.md index d16081ec..4bbc1543 100644 --- a/docs/hcl/x200.md +++ b/docs/hcl/x200.md @@ -5,7 +5,7 @@ ThinkPad X200 It is believed that all X200 laptops are compatible. X200S and X200 Tablet will also work, [depending on the configuration](#x200s). -It \*might\* be possible to put an X200 motherboard in an X201 chassis, +It *might* be possible to put an X200 motherboard in an X201 chassis, though this is currently untested by the libreboot project. The same may also apply between X200S and X201S; again, this is untested. **It's most likely true.** @@ -258,8 +258,8 @@ different, so this page might be BS) pehjota started collecting some steppings for different CPUs on several X200 laptops. You can get the CPUID by running:\ -\$ **dmesg | sed -n 's/\^.\* microcode: CPU0 -sig=0x\\(\[\^,\]\*\\),.\*\$/\\1/p'** +$ **dmesg | sed -n 's/\^.* microcode: CPU0 +sig=0x\\(\[\^,\]*\\),.*$/\\1/p'** What pehjota wrote: The laptops that have issues resuming from suspend, as well as a laptop that (as I mentioned earlier in \#libreboot) won't |