diff options
Diffstat (limited to 'docs/install/bbb_setup.md')
| -rw-r--r-- | docs/install/bbb_setup.md | 7 |
1 files changed, 5 insertions, 2 deletions
diff --git a/docs/install/bbb_setup.md b/docs/install/bbb_setup.md index 18f0c7be..94cfdc0b 100644 --- a/docs/install/bbb_setup.md +++ b/docs/install/bbb_setup.md @@ -40,7 +40,7 @@ Shopping list (pictures of this hardware is shown later): (rev. C) is highly recommended. You can buy one from [Adafruit](https://www.adafruit.com) (USA), [ElectroKit](http://electrokit.com) (Sweden) or any of the - distributors listed [here](http://beagleboard.org/black) (look below + distributors listed on [BeagleBoard's website](http://beagleboard.org/black) (look below 'Purchase'). We recommend this product because we know that it works well for our purposes and doesn't require any non-free software. @@ -328,7 +328,10 @@ PSU to pin 2 on the BBB (P9 header). It is safe to install this now should.* if you need to extend the 3.3v psu leads, just use the same colour M-F -leads, *but* keep all other leads short (10cm or less) +leads, *but* keep all other leads short and equal length (30cm or less). +Keep in mind that length isn't inversely proportional to signal quality, +so trying out different lengths will yield different results. +Same goes for spispeed. You should now have something that looks like this:\   |