diff options
Diffstat (limited to 'docs/install/c201.md')
| -rw-r--r-- | docs/install/c201.md | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/docs/install/c201.md b/docs/install/c201.md index 238c0734..fb39196a 100644 --- a/docs/install/c201.md +++ b/docs/install/c201.md @@ -155,10 +155,10 @@ to be opened. The SPI flash is located next to the write protect screw. Its layout is indicated in the picture below. Note that it is not necessary to connect -`WP#` since removing the screw already connects it to ground. Before -writing to the chip externally, the battery connector has to be -detached. It is located under the heat spreader, that has to be -unscrewed from the rest of the case. The battery connector is located on +`WP#` since after removing the screw it is pulled up weakly to 3v3. Before +writing to the chip externally, the battery has to be unplugged. +Battery connector is located under the heat spreader, that has to be +unscrewed from the rest of the case. It is located on the right and has colorful cables, as shown on the picture below. [![SPI flash |