diff options
Diffstat (limited to 'docs/install/t400_external.md')
| -rw-r--r-- | docs/install/t400_external.md | 55 |
1 files changed, 33 insertions, 22 deletions
diff --git a/docs/install/t400_external.md b/docs/install/t400_external.md index b3773c34..d48c15d4 100644 --- a/docs/install/t400_external.md +++ b/docs/install/t400_external.md @@ -59,6 +59,7 @@ Flash chip size {#flashchips} =============== Use this to find out: + # flashrom -p internal -V MAC address {#macaddress} @@ -212,7 +213,9 @@ Log in as root on your BBB, using the instructions in [bbb\_setup.html\#bbb\_access](bbb_setup.html#bbb_access). Test that flashrom works: - # ./flashrom -p linux\_spi:dev=/dev/spidev1.0,spispeed=512 + + # ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 + In this case, the output was: flashrom v0.9.7-r1854 on Linux 3.8.13-bone47 (armv7l) @@ -225,19 +228,27 @@ In this case, the output was: Please specify which chip definition to use with the -c <chipname> option. How to backup factory.rom (change the -c option as neeed, for your flash -chip):\ -\# **./flashrom -p linux\_spi:dev=/dev/spidev1.0,spispeed=512 -r -factory.rom**\ -\# **./flashrom -p linux\_spi:dev=/dev/spidev1.0,spispeed=512 -r -factory1.rom**\ -\# **./flashrom -p linux\_spi:dev=/dev/spidev1.0,spispeed=512 -r -factory2.rom**\ -Note: the **-c** option is not required in libreboot's patched -flashrom, because the redundant flash chip definitions in *flashchips.c* -have been removed.\ +chip): + + # ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -r + +factory.rom + + # ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -r + +factory1.rom + + # ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -r + +factory2.rom + +Note: the `-c` option is not required in libreboot's patched flashrom, because +the redundant flash chip definitions in `flashchips.c` have been removed. + Now compare the 3 images: - # sha512sum factory\*.rom + # sha512sum factory*.rom + If the hashes match, then just copy one of them (the factory.rom) to a safe place (on a drive connected to another system, not the BBB). This is useful for reverse engineering work, if there is a desirable @@ -248,19 +259,21 @@ Follow the instructions at [../hardware/gm45\_remove\_me.html\#ich9gen](../hardware/gm45_remove_me.html#ich9gen) to change the MAC address inside the libreboot ROM image, before flashing it. Although there is a default MAC address inside the ROM -image, this is not what you want. **Make sure to always change the MAC -address to one that is correct for your system.** +image, this is not what you want. *Make sure to always change the MAC +address to one that is correct for your system.* -Now flash it:\ -\# **./flashrom -p linux\_spi:dev=/dev/spidev1.0,spispeed=512 -w -path/to/libreboot/rom/image.rom -V** +Now flash it: + + # ./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w + +path/to/libreboot/rom/image.rom -V  -You might see errors, but if it says **Verifying flash\... VERIFIED** at +You might see errors, but if it says `Verifying flash... VERIFIED` at the end, then it's flashed and should boot. If you see errors, try -again (and again, and again); the message **Chip content is identical to -the requested image** is also an indication of a successful +again (and again, and again); the message `Chip content is identical to +the requested image` is also an indication of a successful installation. Example output from running the command (see above): @@ -350,8 +363,6 @@ Now [install GNU+Linux](../gnulinux/). Copyright © 2015 Leah Rowe <info@minifree.org>\ - - Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License Version 1.3 or any later version published by the Free Software Foundation |