diff options
Diffstat (limited to 'docs/install/x200_external.md')
-rw-r--r-- | docs/install/x200_external.md | 9 |
1 files changed, 6 insertions, 3 deletions
diff --git a/docs/install/x200_external.md b/docs/install/x200_external.md index 6414fe7c..3ff34501 100644 --- a/docs/install/x200_external.md +++ b/docs/install/x200_external.md @@ -17,13 +17,13 @@ GNU+Linux distribution. Flash chip size =============== -Use this to find out: +Run this command on x200 to find out flash chip model and its size: # flashrom -p internal -V The X200S and X200 Tablet will use a WSON-8 flash chip, on the bottom of the motherboard (this requires removal of the motherboard). Not all X200S/X200T are -supported; see [here](../hardware/x200.html#x200s). +supported; see the [hardware](../hardware/x200.html#x200s) page. MAC address =========== @@ -108,9 +108,12 @@ lifting up the left and right side of it:\ ![](images/x200/disassembly/0006.1.jpg) ![](images/x200/disassembly/0006.jpg) +This shows the location of the flash chip, for both SOIC-8 and SOIC-16:\ +![](images/x200/x200_soic16.jpg) +![](images/x200/x200_soic8.jpg) + Lift back the tape that covers a part of the flash chip, and then connect the clip:\ -![](images/x200/disassembly/0007.jpg) ![](images/x200/disassembly/0008.jpg) On pin 2 of the BBB, where you have the ground (GND), connect the ground |