7 files changed, 19 insertions, 69 deletions
diff --git a/docs/install/c201.md b/docs/install/c201.md
index 2e1d23b8..48b11427 100644
--- a/docs/install/c201.md
+++ b/docs/install/c201.md
@@ -1,5 +1,6 @@
 ---
 title: ASUS Chromebook C201 installation guide 
+x-toc-enable: true
 ...
 
 These instructions are for installing Libreboot to the ASUS Chromebook
@@ -25,26 +26,14 @@ source code is made available by Google:
 It is not distributed along with Libreboot yet. However, it is
 preinstalled on the device, with ChromeOS.
 
-Installing Libreboot internally requires sufficient privileges on the
-system installed on the device.\
-When the device has ChromeOS installed (as it does initially), it is
-necessary to gain root privileges in ChromeOS, to be able to access a
-root shell.
-
--   [Gaining root privileges on ChromeOS](#root_chromeos)
--   [Preparing the device for the installation](#preparing_device)
-    -   [Configuring verified boot
-        parameters](#configuring_verified_boot_parameters)
-    -   [Removing the write protect
-        screw](#removing_write_protect_screw)
--   [Installing Libreboot to the SPI flash]()
-    -   [Installing Libreboot internally, from the
-        device](#installing_libreboot_internally)
-    -   [Installing Libreboot externally, with a SPI flash
-        programmer](#installing_libreboot_externally)
--   [Debian GNU+Linux is recommended for this device](#debian)
+Installing Libreboot internally requires sufficient privileges on the system
+installed on the device. When the device has ChromeOS installed (as it does
+initially), it is necessary to gain root privileges in ChromeOS, to be able to
+access a root shell.
 
 Gaining root privileges on ChromeOS
+--------------------------------
+
 In order to gain root privileges on ChromeOS, developer mode has to be
 enabled from the recovery mode screen and debugging features have to be
 enabled in ChromeOS.
@@ -75,7 +64,7 @@ Before installing Libreboot on the device, both its software and
 hardware has to be prepared to allow the installation procedure and to
 ensure that security features don't get in the way.
 
-Configuring verified boot parameters {#configuring_verified_boot_parameters}
+Configuring verified boot parameters 
 ------------------------------------
 
 It is recommended to have access to the [developer mode
@@ -89,7 +78,7 @@ parameters](../depthcharge/#configuring_verified_boot_parameters):
 Those changes can be reverted later, when the device is known to be in a
 working state.
 
-Removing the write protect screw {#removing_write_protect_screw}
+Removing the write protect screw 
 --------------------------------
 
 Since part of the SPI flash is write-protected by a screw, it is
@@ -111,7 +100,7 @@ screw](images/c201/wp-screw.jpg)](images/c201/wp-screw.jpg)
 The write protect screw can be put back in place later, when the device
 is known to be in a working state.
 
-Installing Libreboot to the SPI flash {#installing_libreboot_spi_flash}
+Installing Libreboot to the SPI flash 
 =====================================
 
 The SPI flash (that holds Libreboot) is divided into various partitions
@@ -119,7 +108,7 @@ that are used to implement parts of the CrOS security system. Libreboot
 is installed in the *read-only* coreboot partition, that becomes
 writable after removing the write-protect screw.
 
-Installing Libreboot internally, from the device {#installing_libreboot_internally}
+Installing Libreboot internally, from the device 
 ------------------------------------------------
 
 Before installing Libreboot to the SPI flash internally, the device has
@@ -153,7 +142,7 @@ You should also see within the output the following:\
 
 Shut down. The device will now boot to Libreboot.
 
-Installing Libreboot externally, with a SPI flash programmer {#installing_libreboot_externally}
+Installing Libreboot externally, with a SPI flash programmer 
 ------------------------------------------------------------
 
 Before installing Libreboot to the SPI flash internally, the device has
diff --git a/docs/install/kcma-d8.md b/docs/install/kcma-d8.md
index 5c2f8d47..7dff9a66 100644
--- a/docs/install/kcma-d8.md
+++ b/docs/install/kcma-d8.md
@@ -1,5 +1,6 @@
 ---
 title: KCMA-D8 external flashing instructions 
+x-toc-enable: true
 ...
 
 Initial flashing instructions for kcma-d8.
@@ -17,11 +18,6 @@ For more general information about this board, refer to
 
 TODO: show photos here, and other info.
 
--   [kcma-d8 boards (and full systems) with libreboot
-    preinstalled](#preinstall)
-
--   [External programmer](#programmer)
-
 External programmer {#programmer}
 ===================
 
diff --git a/docs/install/kgpe-d16.md b/docs/install/kgpe-d16.md
index ab73cdea..a84716b8 100644
--- a/docs/install/kgpe-d16.md
+++ b/docs/install/kgpe-d16.md
@@ -1,5 +1,6 @@
 ---
 title: KGPE-D16 external flashing instructions 
+x-toc-enable: true
 ...
 
 Initial flashing instructions for KGPE-D16.
@@ -17,12 +18,7 @@ For more general information about this board, refer to
 
 TODO: show photos here, and other info.
 
--   [KGPE-D16 boards (and full systems) with libreboot
-    preinstalled](#preinstall)
-
--   [External programmer](#programmer)
-
-External programmer {#programmer}
+External programmer 
 ===================
 
 Refer to [bbb\_setup.md](bbb_setup.md) for a guide on how to set up
diff --git a/docs/install/t60_unbrick.md b/docs/install/t60_unbrick.md
index 98c0be51..82600eee 100644
--- a/docs/install/t60_unbrick.md
+++ b/docs/install/t60_unbrick.md
@@ -1,18 +1,11 @@
 ---
 title: ThinkPad T60 Recovery guide
+x-toc-enable: true
 ...
 
 This section documents how to recover from a bad flash that prevents
 your ThinkPad T60 from booting.
 
-Table of Contents
------------------
-
--   Types of brick:
-    -   [Brick type 1: bucts not reset](#bucts_brick)
-    -   [Brick type 2: bad rom (or user error), system won't
-        boot](#recovery)
-
 Brick type 1: bucts not reset. {#bucts_brick}
 ==============================
 
diff --git a/docs/install/x200_external.md b/docs/install/x200_external.md
index 79ca3c96..3c1d8cfc 100644
--- a/docs/install/x200_external.md
+++ b/docs/install/x200_external.md
@@ -1,5 +1,6 @@
 ---
 title: Flashing the X200 with a BeagleBone Black 
+x-toc-enable: true
 ...
 
 Initial flashing instructions for X200.
@@ -8,17 +9,6 @@ This guide is for those who want libreboot on their ThinkPad X200 while
 they still have the original Lenovo BIOS present. This guide can also be
 followed (adapted) if you brick your X200, to know how to recover.
 
--   [X200 laptops with libreboot pre-installed](#preinstall)
--   [Flash chips](#flashchips)
--   [MAC address](#macaddress)
--   [Initial BBB configuration and installation procedure](#clip)
--   [Boot it!](#boot)
--   [Wifi](#wifi)
--   [wwan](#wwan)
--   [Intel Turbo Memory](#turbomem)
--   [Memory](#memory)
--   [X200S and X200 Tablet users: GPIO33 trick will not work.](#gpio33)
-
 X200 laptops with libreboot pre-installed {#preinstall}
 =========================================
 
diff --git a/docs/install/x60_unbrick.md b/docs/install/x60_unbrick.md
index e1c9098a..64488443 100644
--- a/docs/install/x60_unbrick.md
+++ b/docs/install/x60_unbrick.md
@@ -1,18 +1,11 @@
 ---
 title: ThinkPad X60 Recovery guide
+x-toc-enable: true
 ...
 
 This section documents how to recover from a bad flash that prevents
 your ThinkPad X60 from booting.
 
-Table of Contents
-=================
-
--   Types of brick:
-    -   [Brick type 1: bucts not reset](#bucts_brick)
-    -   [Brick type 2: bad rom (or user error), system won't
-        boot](#recovery)
-
 Brick type 1: bucts not reset. {#bucts_brick}
 ==============================
 
diff --git a/docs/install/x60tablet_unbrick.md b/docs/install/x60tablet_unbrick.md
index d11e7cbb..5f18db8b 100644
--- a/docs/install/x60tablet_unbrick.md
+++ b/docs/install/x60tablet_unbrick.md
@@ -1,18 +1,11 @@
 ---
 title: ThinkPad X60 Tablet Recovery guide
+x-toc-enable: true
 ...
 
 This section documents how to recover from a bad flash that prevents
 your ThinkPad X60 Tablet from booting.
 
-Table of Contents
------------------
-
--   Types of brick:
-    -   [Brick type 1: bucts not reset](#bucts_brick)
-    -   [Brick type 2: bad rom (or user error), system won't
-        boot](#recovery)
-
 Brick type 1: bucts not reset. {#bucts_brick}
 ==============================