diff options
Diffstat (limited to 'docs/resources/text/x200s/cblog03.txt')
| -rw-r--r-- | docs/resources/text/x200s/cblog03.txt | 158 |
1 files changed, 158 insertions, 0 deletions
diff --git a/docs/resources/text/x200s/cblog03.txt b/docs/resources/text/x200s/cblog03.txt new file mode 100644 index 00000000..d078a48a --- /dev/null +++ b/docs/resources/text/x200s/cblog03.txt @@ -0,0 +1,158 @@ +USB + + +coreboot-4.0-7551-ge420139-dirty Wed Dec 10 16:34:05 GMT 2014 starting... +running main(bist = 0) +WARNING: Ignoring S4-assertion-width violation. +Stepping B3 +2 CPU cores +AMT enabled +capable of DDR2 of 800 MHz or lower +VT-d enabled +GMCH: GS45, using high performance mode by default +TXT enabled +Render frequency: 533 MHz +IGD enabled +PCIe-to-GMCH enabled +GMCH supports DDR3 with 1067 MT or less +GMCH supports FSB with up to 1067 MHz +SMBus controller enabled. +0:50:ff +2:51:b +DDR mask 4, DDR 3 +Bank 1 populated: + Raw card type: B + Row addr bits: 15 + Col addr bits: 10 + byte width: 1 + page size: 1024 + banks: 8 + ranks: 1 + tAAmin: 105 + tCKmin: 12 + Max clock: 666 MHz + CAS: 0x07e0 +DIMMs support 666 MHz, but chipset only runs at up to 533. Limiting... +Trying CAS 7, tCK 15. +Found compatible clock / CAS pair: 533 / 7. +Timing values: + tCLK: 15 + tRAS: 20 + tRP: 7 + tRCD: 7 + tRFC: 104 + tWR: 8 + tRD: 11 + tRRD: 4 + tFAW: 20 + tWL: 6 +Changing memory frequency: old 3, new 6. +Setting IGD memory frequencies for VCO #1. +Memory configured in single-channel mode. +Memory map: +TOM = 128MB +TOLUD = 128MB +TOUUD = 128MB +REMAP: base = 65535MB + limit = 0MB +usedMEsize: 0MB +Performing Jedec initialization at address 0x00000000. +Final timings for group 0 on channel 1: 6.0.2.6.4 +Final timings for group 1 on channel 1: 6.0.2.6.4 +Final timings for group 2 on channel 1: 6.0.2.8.3 +Final timings for group 3 on channel 1: 6.0.2.8.6 +Lower bound for byte lane 0 on channel 1: 0.0 +Upper bound for byte lane 0 on channel 1: 10.4 +Final timings for byte lane 0 on channel 1: 5.2 +Lower bound for byte lane 1 on channel 1: 0.0 +Upper bound for byte lane 1 on channel 1: 11.2 +Final timings for byte lane 1 on channel 1: 5.5 +Lower bound for byte lane 2 on channel 1: 0.0 +Upper bound for byte lane 2 on channel 1: 10.5 +Final timings for byte lane 2 on channel 1: 5.2 +Lower bound for byte lane 3 on channel 1: 0.0 +Upper bound for byte lane 3 on channel 1: 9.7 +Final timings for byte lane 3 on channel 1: 4.7 +Timing overflow during read training. +Read training failure: lower bound. +USB + + +coreboot-4.0-7551-ge420139-dirty Wed Dec 10 16:34:05 GMT 2014 starting... +running main(bist = 0) +Interrupted RAM init, reset required. +USB + + +coreboot-4.0-7551-ge420139-dirty Wed Dec 10 16:34:05 GMT 2014 starting... +running main(bist = 0) +Stepping B3 +2 CPU cores +AMT enabled +capable of DDR2 of 800 MHz or lower +VT-d enabled +GMCH: GS45, using high performance mode by default +TXT enabled +Render frequency: 533 MHz +IGD enabled +PCIe-to-GMCH enabled +GMCH supports DDR3 with 1067 MT or less +GMCH supports FSB with up to 1067 MHz +SMBus controller enabled. +0:50:ff +2:51:b +DDR mask 4, DDR 3 +Bank 1 populated: + Raw card type: B + Row addr bits: 15 + Col addr bits: 10 + byte width: 1 + page size: 1024 + banks: 8 + ranks: 1 + tAAmin: 105 + tCKmin: 12 + Max clock: 666 MHz + CAS: 0x07e0 +DIMMs support 666 MHz, but chipset only runs at up to 533. Limiting... +Trying CAS 7, tCK 15. +Found compatible clock / CAS pair: 533 / 7. +Timing values: + tCLK: 15 + tRAS: 20 + tRP: 7 + tRCD: 7 + tRFC: 104 + tWR: 8 + tRD: 11 + tRRD: 4 + tFAW: 20 + tWL: 6 +Setting IGD memory frequencies for VCO #1. +Memory configured in single-channel mode. +Memory map: +TOM = 128MB +TOLUD = 128MB +TOUUD = 128MB +REMAP: base = 65535MB + limit = 0MB +usedMEsize: 0MB +Performing Jedec initialization at address 0x00000000. +Final timings for group 0 on channel 1: 6.0.2.7.6 +Final timings for group 1 on channel 1: 6.0.2.6.6 +Final timings for group 2 on channel 1: 6.0.2.8.7 +Final timings for group 3 on channel 1: 6.1.0.2.5 +Lower bound for byte lane 0 on channel 1: 0.0 +Upper bound for byte lane 0 on channel 1: 10.3 +Final timings for byte lane 0 on channel 1: 5.1 +Lower bound for byte lane 1 on channel 1: 0.0 +Upper bound for byte lane 1 on channel 1: 11.3 +Final timings for byte lane 1 on channel 1: 5.5 +Lower bound for byte lane 2 on channel 1: 0.0 +Upper bound for byte lane 2 on channel 1: 10.5 +Final timings for byte lane 2 on channel 1: 5.2 +Lower bound for byte lane 3 on channel 1: 0.0 +Upper bound for byte lane 3 on channel 1: 9.6 +Final timings for byte lane 3 on channel 1: 4.7 +Timing overflow during read training. +Read training failure: lower bound. |