diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/archive_old.html | 207 | ||||
| -rw-r--r-- | docs/release.html | 35 |
2 files changed, 236 insertions, 6 deletions
diff --git a/docs/archive_old.html b/docs/archive_old.html index 4d894d2c..0fb75819 100644 --- a/docs/archive_old.html +++ b/docs/archive_old.html @@ -37,6 +37,7 @@ <h2>Releases</h2> <ul> + <li><a href="#release20150124">r20150124 (2015 January 24th)</a></li> <li><a href="#release20141015">r20141015 (2014 October 15th)</a></li> <li><a href="#release6">6th release</a> (2014 September 11th <b>pre-release, 7th beta</b>)</li> <li><a href="#release5">5th release</a> (2014 March 7th, revised 2014 June 22nd)</li> @@ -58,6 +59,212 @@ <hr/> + <h1 id="release20150124">Release 20150124</h1> + + <p> + Release date: January 24th, 2015. + </p> + + <h2>Binaries (right-click save as, or use wget)</h2> + <ul> + <li><a href="http://libreboot.org/release/20150124/libreboot_bin.tar.xz">http://libreboot.org/release/20150124/libreboot_bin.tar.xz</a></li> + <li><a href="http://libreboot.org/release/20150124/libreboot_bin.tar.xz.sig">http://libreboot.org/release/20150124/libreboot_bin.tar.xz.sig</a></li> + </ul> + <h2>Source code (right-click save as, or use wget)</h2> + <ul> + <li><a href="http://libreboot.org/release/20150124/libreboot_src.tar.xz">http://libreboot.org/release/20150124/libreboot_src.tar.xz</a></li> + <li><a href="http://libreboot.org/release/20150124/libreboot_src.tar.xz.sig">http://libreboot.org/release/20150124/libreboot_src.tar.xz.sig</a></li> + </ul> + + <p> + Installation instructions can be found at <a href="install/index.html#flashrom">install/index.html#flashrom</a>. + Building instructions (for source code) can be found at <a href="git/index.html#build">git/index.html#build</a>. + </p> + + <h2>Machines supported in this release:</h2> + <ul> + <li> + <b>Lenovo ThinkPad X60/X60s</b> + <ul> + <li> + You can also remove the motherboard from an X61/X61s and replace it with an X60/X60s motherboard. + An X60 Tablet motherboard will also fit inside an X60/X60s. + </li> + </ul> + </li> + <li> + <b>Lenovo ThinkPad X60 Tablet</b> (1024x768 and 1400x1050) with digitizer support + <ul> + <li>See <a href="hcl/index.html#supported_x60t_list">hcl/index.html#supported_x60t_list</a> for list of supported LCD panels</li> + <li>It is unknown whether an X61 Tablet can have it's mainboard replaced with an X60 Tablet motherboard.</li> + </ul> + </li> + <li> + <b>Lenovo ThinkPad T60</b> (Intel GPU) (there are issuesinstall/x200_external.html; see below): + <ul> + <li>See notes below for exceptions, and <a href="hcl/index.html#supported_t60_list">hcl/index.html#supported_t60_list</a> for known working LCD panels.</li> + <li>It is unknown whether a T61 can have it's mainboard replaced with a T60 motherboard.</li> + <li>See <a href="future/index.html#t60_cpu_microcode">future/index.html#t60_cpu_microcode</a>.</li> + <li>T60P (and T60 laptops with ATI GPU) will likely never be supported: <a href="hcl/index.html#t60_ati_intel">hcl/index.html#t60_ati_intel</a></li> + </ul> + </li> + <li> + <b>Lenovo ThinkPad X200</b> + <ul> + <li>X200S and X200 Tablet are also supported, conditionally; see <a href="hcl/x200.html">hcl/x200.html#x200s</a></li> + <li><b>ME/AMT</b>: libreboot removes this, permanently. <a href="hcl/x200_remove_me.html">hcl/x200_remove_me.html</a></li> + </ul> + </li> + <li> + <b>Apple MacBook1,1</b> (MA255LL/A, MA254LL/A, MA472LL/A) + <ul> + <li>See <a href="hcl/index.html#macbook11">hcl/index.html#macbook11</a>.</li> + </ul> + </li> + <li> + <b>Apple MacBook2,1</b> (MA699LL/A, MA701LL/A, MB061LL/A, MA700LL/A, MB063LL/A, MB062LL/A) + <ul> + <li>See <a href="hcl/index.html#macbook21">hcl/index.html#macbook21</a>.</li> + </ul> + </li> + </ul> + + <h2> + Changes for this release (latest changes first, earliest changes last) + </h2> + <ul> + <li>Documentation: added information about how to boot Guix GNU/Linux.</li> + <li>grub.cfg: Added (usb0) and (usb0,*) to the list of devices in the <i>Search for GRUB</i> menuentry (this is needed for Guix GNU/Linux)</li> + <li>grub.cfg: Added (ahci1) to list of devices for ISOLINUX parser (CD/DVD) (this is needed for the X200 docking station).</li> + <li>grub.cfg: ISOLINUX parsing is now done on all USB partitions.</li> + <li>grub.cfg: Automatically switched to /boot/grub/libreboot_grub.cfg on a partition, if it exists.</li> + <li>libreboot_bin: added static ARM binaries for flashrom, cbfstool, ich9gen and + ich9deblob (tested on beaglebone black).</li> + <li>Flashrom: removed redundant Macronix flashchip definitions (for X200 owners).</li> + <li>Flashrom: added whitelist for ThinkPad X200.</li> + <li>X200: fixed uneven backlight (at low levels)</li> + <li>ich9macchange (new script, uses ich9gen): for changing the default MAC address on X200 ROM images.</li> + <li>ich9gen: added capability to change the default MAC address (and update the checksum)</li> + <li>ich9deblob: added new utility ich9gen: this can generate a descriptor+gbe image without a factory.rom dump present.</li> + <li>Modified ich9deblob to use a struct for Gbe, documenting everything.</li> + <li>Massively updated the ich9deblob utility: re-factored everything completely.</li> + <li>Enabled cstates 1 and 2 on macbook21. This reduces idle heat / power consumption.</li> + <li>buildrom-withgrub: disabled creation of *txtmode*.rom for X200 (only framebuffer graphics work)</li> + <li>Updated SeaBIOS (again)</li> + <li>docs/install/index.html#flashrom_x200: improve instructions</li> + <li>Updated flashrom (again) - patches updated</li> + <li>Updated GRUB (again)</li> + <li>Updated coreboot (again)</li> + <li>build-release: not all files were copied to libreboot_src. fix that.</li> + <li>build-release: include cbmem (statically compiled) in libreboot_bin</li> + <li>Documentation (X200): added software-based flashing instructions</li> + <li>Documentation: remove all references to the bus pirate (replaced with BBB flashing tutorials)</li> + <li><b>New board:</b> ThinkPad X200S and X200 Tablet support added to libreboot</li> + <li>build: automatically find board names (configs) to build for</li> + <li><b>New board:</b> ThinkPad X200 support added to libreboot</li> + <li>coreboot-libre config (all boards): enable USB dongle log output (for BeagleBone Black)</li> + <li>cleandeps: actually clean grubinvaders</li> + <li>.gitignore: add powertop directory</li> + <li>cleandeps: clean i945-pwm utility</li> + <li>scripts (all): fix typos</li> + <li>Documentation: general cleanup.</li> + <li>builddeps-flashrom: reduce build commands to a single for loop</li> + <li>scripts (all): replace unnecessary rm -rf with rm -f</li> + <li>powertop.trisquel7: remove sudo (script already checks if the user is root)</li> + <li>docs/release.html: add lenovo g505s to the list of candidates</li> + <li>.gitignore: add libreboot_bin.tar.xz and libreboot_src.tar.xz</li> + <li> + libreboot_bin.tar.xz: Include utils as statically linked binaries + <ul> + <li>This means that the user does not have to install build dependency + or build from source anymore.</li> + </ul> + </li> + <li>deps-trisquel: Add binutils-source</li> + <li>powertop.trisquel7 (new): Setup powertop on trisquel 7</li> + <li>deps-trisquel,flash,lenovobios_firstflash,lenovobios_secondflash,macbook21_firstflash + x60flashfrom5,powertop.trisquel6: check if user is root</li> + <li>deps-trisquel: Make GRUB build on in Trisquel 7 x86_64. (cross compile dependencies. fixes build error in GRUB)</li> + <li>deps-parabola (removed) Remove Parabola dependencies script. Will re-add later (properly tested)</li> + <li>grub.cfg: Add more path checks to isolinux parser (more ISOs should work now)</li> + <li>Update SeaBIOS</li> + <li>x60flashfrom5 (new), for X60 users upgrading from 5th/early release</li> + <li>Update flashrom</li> + <li>Update GRUB</li> + <li> + Updated coreboot-libre + <ul> + <li>i945: permanently set tft_brightness to 0xff (fixes bug on X60 where + turning up brightness at max would make it loop back to low brightness)</li> + </ul> + </li> + <li> + getcb: Revert X60/T60 to legacy backlight controls + <ul> + <li>The ACPI brightness patches were abandoned and obsolete.</li> + </ul> + </li> + <li>grub.cfg: Only load initrd.img if it exists. Add rw to linux line (for ProteanOS)</li> + <li>build: Only generate the GRUB configurations once (re-use on all images)</li> + <li>Only build 2 GRUB payload executables, re-use on all boards.</li> + <li> + resources/utilities/grub-assemble/gen.txtmode.sh: Use GNU BASH<br/> + resources/utilities/grub-assemble/gen.vesafb.sh: Use GNU BASH + </li> + <li>scripts (error handling): Replace exit with exit 1 (make debugging easier)</li> + <li> + Move most files in CBFS to GRUB memdisk, except grub.cfg and grubtest.cfg + <ul> + This reduces the space used in CBFS because coreboot compresses + its payloads with LZMA by default. grub.cfg is all that most users + will want to modify, which remains in CBFS. + </ul> + </li> + <li>docs/release.html Add DMP vortex86ex to list of candidates.</li> + <li>docs/release.html Add ThinkPad X201 to list of candidates.</li> + <li>New links added to docs/security/x60_security and docs/security/t60_security</li> + <li>lenovobios_secondflash: Warn if BUCTS is not present. (not a dealbreaker. Can just pull out nvram battery/coin).</li> + <li>lenovobios_firstflash: Fail if BUCTS fails. (anti-bricking precaution)</li> + <li>Removed obnoxious warnings from flashing scripts, improved documentation instead.</li> + <li>scripts (all): add proper error checking (fail fast, fail early. Do not continue if there are errors)</li> + <li>buildrom-withgrub: rename image to boardname_layout_romtype.rom</li> + <li>buildrom-withgrub: don't move cbfstool, execute directly</li> + <li>resources/utilities/grub-assemble: add French Dvorak (BEPO) keyboard layout.</li> + <li>Documentation: add docs/hardware/x60_keyboard.html (show how to replace keyboard on X60/X60T)</li> + <li>Documentation: major cleanup (better structure, easier to find things)</li> + <li> + docs/release.html: Remove Acer CB5 from list of future candidates. + <ul> + <li> + Too many issues. Chromebooks are crippled (soldered RAM/storage/wifi) + and have too many usability issues for the libreboot project. + </li> + </ul> + </li> + <li>docs/gnulinux/grub_cbfs.html Major cleanup. Usability improvements.</li> + <li>hocs/gnulinux/encrypted_trisquel.html: Fixed mistakes/typos. General improvements</li> + <li> + flash (flashrom script): remove boardmismatch=force + <ul> + <li> + This was put there before for users upgrading from libreboot r5 + to r6, but also allows the user to flash the wrong image. For + example, the user could flash a T60 image on an X60, thus + bricking the machine. It's almost certain that most people + have upgraded by now, so remove this potentially dangerous + option. + </li> + </ul> + </li> + <li>Documentation: update compatibility list for X60T LCD panels.</li> + <li>docs/release.html: add note about X60 Tablet board in X60/X60s</li> + <li>docs/howtos/grub_boot_installer.html: small corrections</li> + <li>docs/howtos/grub_boot_installer.html: improved readability, fixed html errors</li> + <li>Documentation (macbook21 related): clean up</li> + </ul> + +<hr/> + <h1 id="release20141015">Release 20141015</h1> <h2>Binaries (right-click save as, or use wget)</h2> diff --git a/docs/release.html b/docs/release.html index 67e3ae66..cc9e83ec 100644 --- a/docs/release.html +++ b/docs/release.html @@ -45,21 +45,21 @@ <hr/> - <h1 id="release20150124">Release 20150124</h1> + <h1 id="release20150126">Release 20150126</h1> <p> - Release date: January 24th, 2015. + Release date: January 26th, 2015. </p> <h2>Binaries (right-click save as, or use wget)</h2> <ul> - <li><a href="http://libreboot.org/release/20150124/libreboot_bin.tar.xz">http://libreboot.org/release/20150124/libreboot_bin.tar.xz</a></li> - <li><a href="http://libreboot.org/release/20150124/libreboot_bin.tar.xz.sig">http://libreboot.org/release/20150124/libreboot_bin.tar.xz.sig</a></li> + <li><a href="http://libreboot.org/release/20150126/libreboot_bin.tar.xz">http://libreboot.org/release/20150126/libreboot_bin.tar.xz</a></li> + <li><a href="http://libreboot.org/release/20150126/libreboot_bin.tar.xz.sig">http://libreboot.org/release/20150126/libreboot_bin.tar.xz.sig</a></li> </ul> <h2>Source code (right-click save as, or use wget)</h2> <ul> - <li><a href="http://libreboot.org/release/20150124/libreboot_src.tar.xz">http://libreboot.org/release/20150124/libreboot_src.tar.xz</a></li> - <li><a href="http://libreboot.org/release/20150124/libreboot_src.tar.xz.sig">http://libreboot.org/release/20150124/libreboot_src.tar.xz.sig</a></li> + <li><a href="http://libreboot.org/release/20150126/libreboot_src.tar.xz">http://libreboot.org/release/20150126/libreboot_src.tar.xz</a></li> + <li><a href="http://libreboot.org/release/20150126/libreboot_src.tar.xz.sig">http://libreboot.org/release/20150126/libreboot_src.tar.xz.sig</a></li> </ul> <p> @@ -116,6 +116,29 @@ </ul> <h2> + Updates (relative to r20150124) + </h2> + <p> + This is a bug fix release based on r20150124 from two days ago. It contains a few small changes: + </p> + <ul> + <li>grub.cfg: hardcode the list of partitions to search (speeds up booting considerably. GRUB regexp isn't very well optimized)</li> + <li>Docs (x200.html hcl): Remove incorrect information</li> + <li>Documentation (bbb_setup.html): Fix typos</li> + <li> + build-release: delete ich9fdgbe_{4m,8m}.bin files from ich9gen + <ul> + <li> + These were accidentically included in the r20150124 release. They + are generated from ich9gen so it's ok, but they don't need to be + in the archive. + </li> + </ul> + </li> + <li>Documentation (grub_cbfs.html): Looping in libreboot_grub.cfg (Add notes about it if the user copied from grub.cfg in CBFS.)</li> + <li>Documentation: refer to Guix as GNU Guix System Distribution or GNU GSD per advice from the Guix project.</li> + </ul> + <h2> Changes for this release (latest changes first, earliest changes last) </h2> <ul> |