diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/git/index.html | 904 |
1 files changed, 460 insertions, 444 deletions
diff --git a/docs/git/index.html b/docs/git/index.html index f4d2f2ca..620af0c9 100644 --- a/docs/git/index.html +++ b/docs/git/index.html @@ -31,16 +31,21 @@ <a href="#config">Configuring libreboot</a> <ul> <li><a href="#config_dmidecode">dmidecode</a></li> - <li><a href="#config_kfsn4-dre">ASUS KFSN4-DRE</a></li> - <li><a href="#config_x60">ThinkPad X60, X60S and X60 Tablet</a></li> - <li><a href="#config_t60">ThinkPad T60</a></li> - <li><a href="#config_x200">ThinkPad X200</a></li> - <li><a href="#config_r400">ThinkPad R400</a></li> - <li><a href="#config_t400">ThinkPad T400</a></li> - <li><a href="#config_t500">ThinkPad T500</a></li> - <li><a href="#config_macbook21">MacBook2,1</a></li> - <li><a href="#config_qemu_i440fx_piix4">QEMU (x86 i440fx/piix4)</a></li> - <li><a href="#config_qemu_q35_ich9">QEMU (x86 q35/ich9)</a></li> + <li> + <a href="#configgrub">GRUB payload</a> + <ul> + <li><a href="#config_kfsn4-dre">ASUS KFSN4-DRE</a></li> + <li><a href="#config_x60">ThinkPad X60, X60S and X60 Tablet</a></li> + <li><a href="#config_t60">ThinkPad T60</a></li> + <li><a href="#config_x200">ThinkPad X200</a></li> + <li><a href="#config_r400">ThinkPad R400</a></li> + <li><a href="#config_t400">ThinkPad T400</a></li> + <li><a href="#config_t500">ThinkPad T500</a></li> + <li><a href="#config_macbook21">MacBook2,1</a></li> + <li><a href="#config_qemu_i440fx_piix4">QEMU (x86 i440fx/piix4)</a></li> + <li><a href="#config_qemu_q35_ich9">QEMU (x86 q35/ich9)</a></li> + </ul> + </li> </ul> </li> <li><a href="#build">How to build the ROM images</a></li> @@ -287,13 +292,8 @@ If you've already built a kernel before, you know how to use this interface. </p> - <p> - Configurations are then saved as files called <b>".config"</b>. Copies of each configuration used - for each system type by the libreboot build scripts are stored in resources/libreboot/config/grub/ - </p> - <div class="subsection"> - <h3 id="config_dmidecode"> + <h2 id="config_dmidecode"> dmidecode </h2> <p> @@ -316,442 +316,458 @@ with the original BIOS or firmware. <b>libreboot has already done this for you. This information is for reference, in the hope that it will be useful.</b> </p> - </div> - - <div class="subsection"> - <h3 id="config_kfsn4-dre"> - ASUS KFSN4-DRE configuration (file: resources/libreboot/config/grub/kfsn4-dre/config) - </h3> - <ul> - <li>General setup / Expert mode = <i>enable</i></li> - <li>General / Use CMOS for configuration values = <i>enable</i></li> - <li>Mainboard / Mainboard vendor = <i>ASUS</i></li> - <li>Mainboard / Mainboard model = <i>KFSN4-DRE</i></li> - <li>Mainboard / ROM chip size = <i>1024 KB (1 MB)</i></li> - <li>Chipset / Include CPU microcode in CBFS = <i>Do not include microcode updates</i></li> - <li>Devices / Use native graphics initialization = <i>enable</i></li> - <li> - Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer) - <ul> - <li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time - to enable coreboot framebuffer for a separate set of ROM images, in each system.</li> - </ul> - </li> - <li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li> - <li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li> - <li>Generic Drivers / Type of dongle = <i>Net20DC or compatible</i></li> - <li>Generic Drivers / Digitizer = <i>Present</i></li> - - <li>Console / USB dongle console output = <i>enable</i></li> - <li>Payload / Add a payload = <i>An ELF executable payload</i></li> - <li>Payload / Payload path and filename = <i>grub.elf</i></li> - </ul> <p> - Now go back into Devices: - </p> - <ul> - <li>Devices / Run VGA Option ROMs = <i>disable</i></li> - <li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li> - </ul> - <p> - The resulting .config file was saved as resources/libreboot/config/<b>grub/kfsn4-dre/config</b> and is used by the build - scripts for this system. + In practise, this information is useless and you can + just leave it on the defaults that coreboot uses (this + is what libreboot does, on most boards). </p> </div> - <div class="subsection"> - <h3 id="config_x60"> - ThinkPad X60, X60S and X60 Tablet configuration (file: resources/libreboot/config/grub/x60/config) - </h3> - <ul> - <li>General setup / Expert mode = <i>enable</i></li> - <li>General / Use CMOS for configuration values = <i>enable</i></li> - - <li>Mainboard / Mainboard vendor = <i>Lenovo</i></li> - <li>Mainboard / Mainboard model = <i>ThinkPad X60 / X60s / X60t</i></li> - <li>Mainboard / ROM chip size = <i>2048 KB (2 MB)</i></li> - <li>Chipset / Include CPU microcode in CBFS = <i>Do not include microcode updates</i></li> - <li>Devices / Use native graphics initialization = <i>enable</i></li> - <li> - Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer) - <ul> - <li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time - to enable coreboot framebuffer for a separate set of ROM images, in each system.</li> - </ul> - </li> - <li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li> - <li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li> - <li>Generic Drivers / Type of dongle = <i>Net20DC or compatible</i></li> - <li>Generic Drivers / Digitizer = <i>Present</i></li> - - <li>Console / USB dongle console output = <i>enable</i></li> - <li>Payload / Add a payload = <i>An ELF executable payload</i></li> - <li>Payload / Payload path and filename = <i>grub.elf</i></li> - </ul> - <p> - Now go back into Devices: - </p> - <ul> - <li>Devices / Run VGA Option ROMs = <i>disable</i></li> - <li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li> - </ul> - <p> - The resulting .config file was saved as resources/libreboot/config/<b>grub/x60/config</b> and is used by the build - scripts for this system. - </p> - <p> - This configuration is used on all variants: X60, X60S and X60 Tablet. - </p> - </div> + <h2 id="configgrub">GRUB payload</h2> - <div class="subsection"> - <h3 id="config_t60"> - ThinkPad T60 configuration (file: resources/libreboot/config/grub/t60/config) - </h3> - <ul> - <li>General setup / Expert mode = <i>enable</i></li> - <li>General setup / Local version string = <i>79ETE7WW (2.27 )</i></li> - <li>General / Use CMOS for configuration values = <i>enable</i></li> - - <li>Mainboard / Mainboard vendor = <i>Lenovo</i></li> - <li>Mainboard / Mainboard model = <i>ThinkPad T60 / T60p</i></li> - <li>Mainboard / ROM chip size = <i>2048 KB (2 MB)</i></li> - <li>System tables / SMBIOS Serial Number = <i>L3DKE06</i></li> - <li>System tables / SMBIOS Version Number = <i>ThinkPad T60</i></li> - <li>System tables / SMBIOS Manufacturer = <i>LENOVO</i></li> - <li>System tables / SMBIOS Product name = <i>1951FEG</i></li> - <li>Chipset / Include CPU microcode in CBFS = <i>Do not include microcode updates</i></li> - <li>Devices / Use native graphics initialization = <i>enable</i></li> - <li> - Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer) - <ul> - <li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time - to enable coreboot framebuffer for a separate set of ROM images, in each system.</li> - </ul> - </li> - <li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li> - <li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li> - <li>Generic Drivers / Type of dongle = <i>Net20DC or compatible</i></li> - - <li>Console / USB dongle console output = <i>enable</i></li> - <li>Payload / Add a payload = <i>An ELF executable payload</i></li> - <li>Payload / Payload path and filename = <i>grub.elf</i></li> - </ul> - <p> - Go back into Devices: - </p> - <ul> - <li>Devices / Run VGA Option ROMs = <i>disable</i></li> - <li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li> - </ul> - <p> - The resulting .config file was saved as resources/libreboot/config/<b>grub/t60/config</b> and is used by the build - scripts for this system. - </p> - <p> - It is believed that the motherboards on 14.1" and 15.1" T60s are the same, so the same configuration is used - on both the 14.1" and 15.1" T60s. - </p> - </div> - - <div class="subsection"> - <h3 id="config_x200"> - ThinkPad X200 configuration (file: resources/libreboot/config/grub/x200_4mb/config and resources/libreboot/config/grub/x200_8mb/config) - </h3> - <p> - These are saved as two configs, because there are 2 size flash chips: 4MB or 8MB. - </p> - <ul> - <li>General / Expert mode = <i>enable</i></li> - <li>General / Use CMOS for configuration values = <i>enable</i></li> - - <li>Mainboard / Mainboard vendor = <i>Lenovo</i></li> - <li>Mainboard / Mainboard model = <i>ThinkPad X200</i></li> - <li>Mainboard / ROM chip size = <i>4096 KB (4 MB)</i> or <i>8192 KB (8 MB)</i> depending on flash chip size</li> - <li>Chipset / Include CPU microcode in CBFS = <i>Do not include microcode updates</i></li> - <li>Chipset / Size of CBFS filesystem in ROM = byte size <i>0x7FD000</i> (for 8MB flash chip) or <i>3FD000</i> (for 4MB flash chip)</li> - <li>Devices / Use native graphics initialization = <i>enable</i></li> - <li> - Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer) - <ul> - <li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time - to enable coreboot framebuffer for a separate set of ROM images, in each system.</li> - </ul> - </li> - <li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li> - <li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li> - <li>Generic Drivers / Type of dongle = <i>Net20DC or compatible</i></li> - <li>Generic Drivers / Digitizer = <i>Present</i></li> - - <li>Console / USB dongle console output = <i>enable</i></li> - <li>Payload / Add a payload = <i>An ELF executable payload</i></li> - <li>Payload / Payload path and filename = <i>grub.elf</i></li> - </ul> - <p> - Go back and disable option ROMs: - </p> - <ul> - <li>Devices / Run VGA Option ROMs = <i>disable</i></li> - <li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li> - </ul> - <p> - The resulting .config file was saved as resources/libreboot/config/<b>grub/x200_8mb/config</b> and - resources/libreboot/config/<b>grub/x200_4mb/config</b> and is used by the build - scripts for this system. - </p> - </div> - - <div class="subsection"> - <h3 id="config_r400"> - ThinkPad R400 configuration (file: resources/libreboot/config/grub/r400_4mb/config and resources/libreboot/config/grub/r400_8mb/config) - </h3> - <p> - These are saved as two configs, because there are 2 size flash chips: 4MB or 8MB. - </p> - <ul> - <li>General / Expert mode = <i>enable</i></li> - <li>General / Use CMOS for configuration values = <i>enable</i></li> - - <li>Mainboard / Mainboard vendor = <i>Lenovo</i></li> - <li>Mainboard / Mainboard model = <i>ThinkPad R400</i></li> - <li>Mainboard / ROM chip size = <i>4096 KB (4 MB)</i> or <i>8192 KB (8 MB)</i> depending on flash chip size</li> - <li>Chipset / Include CPU microcode in CBFS = <i>Do not include microcode updates</i></li> - <li>Chipset / Size of CBFS filesystem in ROM = byte size <i>0x7FD000</i> (for 8MB flash chip) or <i>3FD000</i> (for 4MB flash chip)</li> - <li>Devices / Use native graphics initialization = <i>enable</i></li> - <li> - Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer) - <ul> - <li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time - to enable coreboot framebuffer for a separate set of ROM images, in each system.</li> - </ul> - </li> - <li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li> - <li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li> - <li>Generic Drivers / Type of dongle = <i>Net20DC or compatible</i></li> - - <li>Console / USB dongle console output = <i>enable</i></li> - <li>Payload / Add a payload = <i>An ELF executable payload</i></li> - <li>Payload / Payload path and filename = <i>grub.elf</i></li> - </ul> - <p> - Go back and disable option ROMs: - </p> - <ul> - <li>Devices / Run VGA Option ROMs = <i>disable</i></li> - <li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li> - </ul> - <p> - The resulting .config file was saved as resources/libreboot/config/<b>grub/r400_8mb/config</b> and - resources/libreboot/config/<b>grub/r400_4mb/config</b> and is used by the build - scripts for this system. - </p> - </div> - - <div class="subsection"> - <h3 id="config_t400"> - ThinkPad T400 configuration (file: resources/libreboot/config/grub/t400_4mb/config and resources/libreboot/config/grub/t400_8mb/config) - </h3> - <p> - These are saved as two configs, because there are 2 size flash chips: 4MB or 8MB. - </p> - <ul> - <li>General / Expert mode = <i>enable</i></li> - <li>General / Use CMOS for configuration values = <i>enable</i></li> - - <li>Mainboard / Mainboard vendor = <i>Lenovo</i></li> - <li>Mainboard / Mainboard model = <i>ThinkPad T400</i></li> - <li>Mainboard / ROM chip size = <i>4096 KB (4 MB)</i> or <i>8192 KB (8 MB)</i> depending on flash chip size</li> - <li>Chipset / Include CPU microcode in CBFS = <i>Do not include microcode updates</i></li> - <li>Chipset / Size of CBFS filesystem in ROM = byte size <i>0x7FD000</i> (for 8MB flash chip) or <i>3FD000</i> (for 4MB flash chip)</li> - <li>Devices / Use native graphics initialization = <i>enable</i></li> - <li> - Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer) - <ul> - <li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time - to enable coreboot framebuffer for a separate set of ROM images, in each system.</li> - </ul> - </li> - <li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li> - <li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li> - <li>Generic Drivers / Type of dongle = <i>Net20DC or compatible</i></li> - - <li>Console / USB dongle console output = <i>enable</i></li> - <li>Payload / Add a payload = <i>An ELF executable payload</i></li> - <li>Payload / Payload path and filename = <i>grub.elf</i></li> - </ul> - <p> - Go back and disable option ROMs: - </p> - <ul> - <li>Devices / Run VGA Option ROMs = <i>disable</i></li> - <li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li> - </ul> - <p> - The resulting .config file was saved as resources/libreboot/config/<b>grub/t400_8mb/config</b> and - resources/libreboot/config/<b>grub/t400_4mb/config</b> and is used by the build - scripts for this system. - </p> - </div> - - <div class="subsection"> - <h3 id="config_t500"> - ThinkPad T500 configuration (file: resources/libreboot/config/grub/t500_4mb/config and resources/libreboot/config/grub/t500_8mb/config) - </h3> - <p> - These are saved as two configs, because there are 2 size flash chips: 4MB or 8MB. - </p> - <ul> - <li>General / Expert mode = <i>enable</i></li> - <li>General / Use CMOS for configuration values = <i>enable</i></li> - - <li>Mainboard / Mainboard vendor = <i>Lenovo</i></li> - <li>Mainboard / Mainboard model = <i>ThinkPad T500</i></li> - <li>Mainboard / ROM chip size = <i>4096 KB (4 MB)</i> or <i>8192 KB (8 MB)</i> depending on flash chip size</li> - <li>Chipset / Include CPU microcode in CBFS = <i>Do not include microcode updates</i></li> - <li>Chipset / Size of CBFS filesystem in ROM = byte size <i>0x7FD000</i> (for 8MB flash chip) or <i>3FD000</i> (for 4MB flash chip)</li> - <li>Devices / Use native graphics initialization = <i>enable</i></li> - <li> - Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer) - <ul> - <li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time - to enable coreboot framebuffer for a separate set of ROM images, in each system.</li> - </ul> - </li> - <li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li> - <li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li> - <li>Generic Drivers / Type of dongle = <i>Net20DC or compatible</i></li> - - <li>Console / USB dongle console output = <i>enable</i></li> - <li>Payload / Add a payload = <i>An ELF executable payload</i></li> - <li>Payload / Payload path and filename = <i>grub.elf</i></li> - </ul> - <p> - Go back and disable option ROMs: - </p> - <ul> - <li>Devices / Run VGA Option ROMs = <i>disable</i></li> - <li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li> - </ul> - <p> - The resulting .config file was saved as resources/libreboot/config/<b>grub/t500_8mb/config</b> and - resources/libreboot/config/<b>grub/t500_4mb/config</b> and is used by the build - scripts for this system. - </p> - </div> + <p> + GRUB is one of the payloads that libreboot targets. + </p> - <div class="subsection"> - <h3 id="config_macbook21"> - MacBook2,1 configuration (file: resources/libreboot/config/grub/macbook21/config) - </h3> - <ul> - <li>General / Expert mode = <i>enable</i></li> - <li>General / Local version string = <i>" MB21.88Z.00A5.B07.0706270922"</i> (without the quotes)</li> - <li>General / Use CMOS for configuration values = <i>enable</i></li> - - <li>Mainboard / Mainboard vendor = <i>Apple</i></li> - <li>Mainboard / Mainboard model = <i>Macbook2,1 ICH7 TESTING</i></li> - <li>Mainboard / ROM chip size = <i>2048 KB (2 MB)</i></li> - <li>System tables / SMBIOS Serial Number = <i>W8724XXXXXX</i></li> - <li>System tables / SMBIOS Version Number = <i>1.0</i></li> - <li>System tables / SMBIOS Manufacturer = <i>Apple Inc.</i></li> - <li>System tables / SMBIOS Product Name = <i>MacBook2,1</i></li> - <li>Chipset / Include CPU microcode in CBFS = <i>Do not include microcode updates</i></li> - <li>Devices / Use native graphics initialization = <i>enable</i></li> - <li> - Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer) - <ul> - <li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time - to enable coreboot framebuffer for a separate set of ROM images, in each system.</li> - </ul> - </li> - <li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li> - <li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li> - <li>Generic Drivers / Type of dongle = <i></i></li> - - <li>Console / USB dongle console output = <i>enable</i></li> - <li>Payload / Add a payload = <i>An ELF executable payload</i></li> - <li>Payload / Payload path and filename = <i>grub.elf</i></li> - </ul> - <p> - Go back and disable option ROMs: - </p> - <ul> - <li>Devices / Run VGA Option ROMs = <i>disable</i></li> - <li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li> - </ul> - <p> - The resulting .config file was saved as resources/libreboot/config/<b>grub/macbook21/config</b> and is used by the build - scripts for this system. <b>This config is also used for the MacBook1,1</b>. - </p> - </div> + <p> + Configurations are then saved as files called <b>".config"</b>. Copies of each configuration used + for each system type by the libreboot build scripts are stored in resources/libreboot/config/grub/ + </p> + + <div class="subsection"> + <h3 id="config_kfsn4-dre"> + ASUS KFSN4-DRE configuration (file: resources/libreboot/config/grub/kfsn4-dre/config) + </h3> + <ul> + <li>General setup / Expert mode = <i>enable</i></li> + <li>General / Use CMOS for configuration values = <i>enable</i></li> + <li>Mainboard / Mainboard vendor = <i>ASUS</i></li> + <li>Mainboard / Mainboard model = <i>KFSN4-DRE</i></li> + <li>Mainboard / ROM chip size = <i>1024 KB (1 MB)</i></li> + <li>Chipset / Include CPU microcode in CBFS = <i>Do not include microcode updates</i></li> + <li>Devices / Use native graphics initialization = <i>enable</i></li> + <li> + Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer) + <ul> + <li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time + to enable coreboot framebuffer for a separate set of ROM images, in each system.</li> + </ul> + </li> + <li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li> + <li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li> + <li>Generic Drivers / Type of dongle = <i>Net20DC or compatible</i></li> + <li>Generic Drivers / Digitizer = <i>Present</i></li> + + <li>Console / USB dongle console output = <i>enable</i></li> + <li>Payload / Add a payload = <i>An ELF executable payload</i></li> + <li>Payload / Payload path and filename = <i>grub.elf</i></li> + </ul> + <p> + Now go back into Devices: + </p> + <ul> + <li>Devices / Run VGA Option ROMs = <i>disable</i></li> + <li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li> + </ul> + <p> + The resulting .config file was saved as resources/libreboot/config/<b>grub/kfsn4-dre/config</b> and is used by the build + scripts for this system. + </p> + </div> + + <div class="subsection"> + <h3 id="config_x60"> + ThinkPad X60, X60S and X60 Tablet configuration (file: resources/libreboot/config/grub/x60/config) + </h3> + <ul> + <li>General setup / Expert mode = <i>enable</i></li> + <li>General / Use CMOS for configuration values = <i>enable</i></li> + + <li>Mainboard / Mainboard vendor = <i>Lenovo</i></li> + <li>Mainboard / Mainboard model = <i>ThinkPad X60 / X60s / X60t</i></li> + <li>Mainboard / ROM chip size = <i>2048 KB (2 MB)</i></li> + <li>Chipset / Include CPU microcode in CBFS = <i>Do not include microcode updates</i></li> + <li>Devices / Use native graphics initialization = <i>enable</i></li> + <li> + Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer) + <ul> + <li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time + to enable coreboot framebuffer for a separate set of ROM images, in each system.</li> + </ul> + </li> + <li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li> + <li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li> + <li>Generic Drivers / Type of dongle = <i>Net20DC or compatible</i></li> + <li>Generic Drivers / Digitizer = <i>Present</i></li> + + <li>Console / USB dongle console output = <i>enable</i></li> + <li>Payload / Add a payload = <i>An ELF executable payload</i></li> + <li>Payload / Payload path and filename = <i>grub.elf</i></li> + </ul> + <p> + Now go back into Devices: + </p> + <ul> + <li>Devices / Run VGA Option ROMs = <i>disable</i></li> + <li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li> + </ul> + <p> + The resulting .config file was saved as resources/libreboot/config/<b>grub/x60/config</b> and is used by the build + scripts for this system. + </p> + <p> + This configuration is used on all variants: X60, X60S and X60 Tablet. + </p> + </div> + + <div class="subsection"> + <h3 id="config_t60"> + ThinkPad T60 configuration (file: resources/libreboot/config/grub/t60/config) + </h3> + <ul> + <li>General setup / Expert mode = <i>enable</i></li> + <li>General setup / Local version string = <i>79ETE7WW (2.27 )</i></li> + <li>General / Use CMOS for configuration values = <i>enable</i></li> + + <li>Mainboard / Mainboard vendor = <i>Lenovo</i></li> + <li>Mainboard / Mainboard model = <i>ThinkPad T60 / T60p</i></li> + <li>Mainboard / ROM chip size = <i>2048 KB (2 MB)</i></li> + <li>System tables / SMBIOS Serial Number = <i>L3DKE06</i></li> + <li>System tables / SMBIOS Version Number = <i>ThinkPad T60</i></li> + <li>System tables / SMBIOS Manufacturer = <i>LENOVO</i></li> + <li>System tables / SMBIOS Product name = <i>1951FEG</i></li> + <li>Chipset / Include CPU microcode in CBFS = <i>Do not include microcode updates</i></li> + <li>Devices / Use native graphics initialization = <i>enable</i></li> + <li> + Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer) + <ul> + <li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time + to enable coreboot framebuffer for a separate set of ROM images, in each system.</li> + </ul> + </li> + <li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li> + <li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li> + <li>Generic Drivers / Type of dongle = <i>Net20DC or compatible</i></li> + + <li>Console / USB dongle console output = <i>enable</i></li> + <li>Payload / Add a payload = <i>An ELF executable payload</i></li> + <li>Payload / Payload path and filename = <i>grub.elf</i></li> + </ul> + <p> + Go back into Devices: + </p> + <ul> + <li>Devices / Run VGA Option ROMs = <i>disable</i></li> + <li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li> + </ul> + <p> + The resulting .config file was saved as resources/libreboot/config/<b>grub/t60/config</b> and is used by the build + scripts for this system. + </p> + <p> + It is believed that the motherboards on 14.1" and 15.1" T60s are the same, so the same configuration is used + on both the 14.1" and 15.1" T60s. + </p> + </div> + + <div class="subsection"> + <h3 id="config_x200"> + ThinkPad X200 configuration (file: resources/libreboot/config/grub/x200_4mb/config and resources/libreboot/config/grub/x200_8mb/config) + </h3> + <p> + These are saved as two configs, because there are 2 size flash chips: 4MB or 8MB. + </p> + <ul> + <li>General / Expert mode = <i>enable</i></li> + <li>General / Use CMOS for configuration values = <i>enable</i></li> + + <li>Mainboard / Mainboard vendor = <i>Lenovo</i></li> + <li>Mainboard / Mainboard model = <i>ThinkPad X200</i></li> + <li>Mainboard / ROM chip size = <i>4096 KB (4 MB)</i> or <i>8192 KB (8 MB)</i> depending on flash chip size</li> + <li>Chipset / Include CPU microcode in CBFS = <i>Do not include microcode updates</i></li> + <li>Chipset / Size of CBFS filesystem in ROM = byte size <i>0x7FD000</i> (for 8MB flash chip) or <i>3FD000</i> (for 4MB flash chip)</li> + <li>Devices / Use native graphics initialization = <i>enable</i></li> + <li> + Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer) + <ul> + <li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time + to enable coreboot framebuffer for a separate set of ROM images, in each system.</li> + </ul> + </li> + <li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li> + <li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li> + <li>Generic Drivers / Type of dongle = <i>Net20DC or compatible</i></li> + <li>Generic Drivers / Digitizer = <i>Present</i></li> + + <li>Console / USB dongle console output = <i>enable</i></li> + <li>Payload / Add a payload = <i>An ELF executable payload</i></li> + <li>Payload / Payload path and filename = <i>grub.elf</i></li> + </ul> + <p> + Go back and disable option ROMs: + </p> + <ul> + <li>Devices / Run VGA Option ROMs = <i>disable</i></li> + <li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li> + </ul> + <p> + The resulting .config file was saved as resources/libreboot/config/<b>grub/x200_8mb/config</b> and + resources/libreboot/config/<b>grub/x200_4mb/config</b> and is used by the build + scripts for this system. + </p> + </div> - <div class="subsection"> - <h3 id="config_qemu_i440fx_piix4"> - QEMU (x86 i440fx/piix4) configuration (file: resources/libreboot/config/grub/qemu_i440fx_piix4/config) - </h3> - <ul> - <li>General / Expert mode = <i>enable</i></li> - <li>Mainboard / Mainboard vendor = <i>Emulation</i></li> - <li>Mainboard / Mainboard model = <i>QEMU x86 i440fx/piix4 (aka qemu -M pc)</i></li> - <li>Mainboard / ROM chip size = <i>8192 KB (8 MB)</i></li> - <li>Devices / Use native graphics initialization = <i>enable</i> (should already be enabled)</li> - <li> - Display / Keep VESA framebuffer = <i>enable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer) - <ul> - <li>Libreboot provides this with framebuffer enabled by default, but it automatically patches a copy of the config at build time - to enable coreboot text-mode for a separate set of ROM images, in each system.</li> - </ul> - </li> - - <li>Payload / Add a payload = <i>An ELF executable payload</i></li> - <li>Payload / Payload path and filename = <i>grub.elf</i></li> - </ul> - <p> - Go back and disable option ROMs: - </p> - <ul> - <li>Devices / Run VGA Option ROMs = <i>disable</i></li> - <li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li> - </ul> - <p> - The resulting .config file was saved as resources/libreboot/config/<b>grub/qemu_i440fx_piix4/config</b> and is used by the build - scripts for this system. - </p> - </div> + <div class="subsection"> + <h3 id="config_r400"> + ThinkPad R400 configuration (file: resources/libreboot/config/grub/r400_4mb/config and resources/libreboot/config/grub/r400_8mb/config) + </h3> + <p> + These are saved as two configs, because there are 2 size flash chips: 4MB or 8MB. + </p> + <ul> + <li>General / Expert mode = <i>enable</i></li> + <li>General / Use CMOS for configuration values = <i>enable</i></li> + + <li>Mainboard / Mainboard vendor = <i>Lenovo</i></li> + <li>Mainboard / Mainboard model = <i>ThinkPad R400</i></li> + <li>Mainboard / ROM chip size = <i>4096 KB (4 MB)</i> or <i>8192 KB (8 MB)</i> depending on flash chip size</li> + <li>Chipset / Include CPU microcode in CBFS = <i>Do not include microcode updates</i></li> + <li>Chipset / Size of CBFS filesystem in ROM = byte size <i>0x7FD000</i> (for 8MB flash chip) or <i>3FD000</i> (for 4MB flash chip)</li> + <li>Devices / Use native graphics initialization = <i>enable</i></li> + <li> + Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer) + <ul> + <li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time + to enable coreboot framebuffer for a separate set of ROM images, in each system.</li> + </ul> + </li> + <li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li> + <li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li> + <li>Generic Drivers / Type of dongle = <i>Net20DC or compatible</i></li> + + <li>Console / USB dongle console output = <i>enable</i></li> + <li>Payload / Add a payload = <i>An ELF executable payload</i></li> + <li>Payload / Payload path and filename = <i>grub.elf</i></li> + </ul> + <p> + Go back and disable option ROMs: + </p> + <ul> + <li>Devices / Run VGA Option ROMs = <i>disable</i></li> + <li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li> + </ul> + <p> + The resulting .config file was saved as resources/libreboot/config/<b>grub/r400_8mb/config</b> and + resources/libreboot/config/<b>grub/r400_4mb/config</b> and is used by the build + scripts for this system. + </p> + </div> - <div class="subsection"> - <h3 id="config_qemu_q35_ich9"> - QEMU (x86 q35/ich9) configuration (file: resources/libreboot/config/grub/qemu_q35_ich9/config) - </h3> - <ul> - <li>General / Expert mode = <i>enable</i></li> - <li>Mainboard / Mainboard vendor = <i>Emulation</i></li> - <li>Mainboard / Mainboard model = <i>QEMU x86 q35/ich9 (aka qemu -M q35)</i></li> - <li>Mainboard / ROM chip size = <i>8192 KB (8 MB)</i></li> - <li>Devices / Use native graphics initialization = <i>enable</i> (should already be enabled)</li> - <li> - Display / Keep VESA framebuffer = <i>enable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer) - <ul> - <li>Libreboot provides this with framebuffer enabled by default, but it automatically patches a copy of the config at build time - to enable coreboot text-mode for a separate set of ROM images, in each system.</li> - </ul> - </li> - - <li>Payload / Add a payload = <i>An ELF executable payload</i></li> - <li>Payload / Payload path and filename = <i>grub.elf</i></li> - </ul> - <p> - Go back and disable option ROMs: - </p> - <ul> - <li>Devices / Run VGA Option ROMs = <i>disable</i></li> - <li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li> - </ul> - <p> - The resulting .config file was saved as resources/libreboot/config/<b>grub/qemu_q35_ich9/config</b> and is used by the build - scripts for this system. - </p> - </div> + <div class="subsection"> + <h3 id="config_t400"> + ThinkPad T400 configuration (file: resources/libreboot/config/grub/t400_4mb/config and resources/libreboot/config/grub/t400_8mb/config) + </h3> + <p> + These are saved as two configs, because there are 2 size flash chips: 4MB or 8MB. + </p> + <ul> + <li>General / Expert mode = <i>enable</i></li> + <li>General / Use CMOS for configuration values = <i>enable</i></li> + + <li>Mainboard / Mainboard vendor = <i>Lenovo</i></li> + <li>Mainboard / Mainboard model = <i>ThinkPad T400</i></li> + <li>Mainboard / ROM chip size = <i>4096 KB (4 MB)</i> or <i>8192 KB (8 MB)</i> depending on flash chip size</li> + <li>Chipset / Include CPU microcode in CBFS = <i>Do not include microcode updates</i></li> + <li>Chipset / Size of CBFS filesystem in ROM = byte size <i>0x7FD000</i> (for 8MB flash chip) or <i>3FD000</i> (for 4MB flash chip)</li> + <li>Devices / Use native graphics initialization = <i>enable</i></li> + <li> + Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer) + <ul> + <li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time + to enable coreboot framebuffer for a separate set of ROM images, in each system.</li> + </ul> + </li> + <li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li> + <li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li> + <li>Generic Drivers / Type of dongle = <i>Net20DC or compatible</i></li> + + <li>Console / USB dongle console output = <i>enable</i></li> + <li>Payload / Add a payload = <i>An ELF executable payload</i></li> + <li>Payload / Payload path and filename = <i>grub.elf</i></li> + </ul> + <p> + Go back and disable option ROMs: + </p> + <ul> + <li>Devices / Run VGA Option ROMs = <i>disable</i></li> + <li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li> + </ul> + <p> + The resulting .config file was saved as resources/libreboot/config/<b>grub/t400_8mb/config</b> and + resources/libreboot/config/<b>grub/t400_4mb/config</b> and is used by the build + scripts for this system. + </p> + </div> + + <div class="subsection"> + <h3 id="config_t500"> + ThinkPad T500 configuration (file: resources/libreboot/config/grub/t500_4mb/config and resources/libreboot/config/grub/t500_8mb/config) + </h3> + <p> + These are saved as two configs, because there are 2 size flash chips: 4MB or 8MB. + </p> + <ul> + <li>General / Expert mode = <i>enable</i></li> + <li>General / Use CMOS for configuration values = <i>enable</i></li> + + <li>Mainboard / Mainboard vendor = <i>Lenovo</i></li> + <li>Mainboard / Mainboard model = <i>ThinkPad T500</i></li> + <li>Mainboard / ROM chip size = <i>4096 KB (4 MB)</i> or <i>8192 KB (8 MB)</i> depending on flash chip size</li> + <li>Chipset / Include CPU microcode in CBFS = <i>Do not include microcode updates</i></li> + <li>Chipset / Size of CBFS filesystem in ROM = byte size <i>0x7FD000</i> (for 8MB flash chip) or <i>3FD000</i> (for 4MB flash chip)</li> + <li>Devices / Use native graphics initialization = <i>enable</i></li> + <li> + Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer) + <ul> + <li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time + to enable coreboot framebuffer for a separate set of ROM images, in each system.</li> + </ul> + </li> + <li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li> + <li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li> + <li>Generic Drivers / Type of dongle = <i>Net20DC or compatible</i></li> + + <li>Console / USB dongle console output = <i>enable</i></li> + <li>Payload / Add a payload = <i>An ELF executable payload</i></li> + <li>Payload / Payload path and filename = <i>grub.elf</i></li> + </ul> + <p> + Go back and disable option ROMs: + </p> + <ul> + <li>Devices / Run VGA Option ROMs = <i>disable</i></li> + <li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li> + </ul> + <p> + The resulting .config file was saved as resources/libreboot/config/<b>grub/t500_8mb/config</b> and + resources/libreboot/config/<b>grub/t500_4mb/config</b> and is used by the build + scripts for this system. + </p> + </div> + + <div class="subsection"> + <h3 id="config_macbook21"> + MacBook2,1 configuration (file: resources/libreboot/config/grub/macbook21/config) + </h3> + <ul> + <li>General / Expert mode = <i>enable</i></li> + <li>General / Local version string = <i>" MB21.88Z.00A5.B07.0706270922"</i> (without the quotes)</li> + <li>General / Use CMOS for configuration values = <i>enable</i></li> + + <li>Mainboard / Mainboard vendor = <i>Apple</i></li> + <li>Mainboard / Mainboard model = <i>Macbook2,1 ICH7 TESTING</i></li> + <li>Mainboard / ROM chip size = <i>2048 KB (2 MB)</i></li> + <li>System tables / SMBIOS Serial Number = <i>W8724XXXXXX</i></li> + <li>System tables / SMBIOS Version Number = <i>1.0</i></li> + <li>System tables / SMBIOS Manufacturer = <i>Apple Inc.</i></li> + <li>System tables / SMBIOS Product Name = <i>MacBook2,1</i></li> + <li>Chipset / Include CPU microcode in CBFS = <i>Do not include microcode updates</i></li> + <li>Devices / Use native graphics initialization = <i>enable</i></li> + <li> + Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer) + <ul> + <li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time + to enable coreboot framebuffer for a separate set of ROM images, in each system.</li> + </ul> + </li> + <li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li> + <li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li> + <li>Generic Drivers / Type of dongle = <i></i></li> + + <li>Console / USB dongle console output = <i>enable</i></li> + <li>Payload / Add a payload = <i>An ELF executable payload</i></li> + <li>Payload / Payload path and filename = <i>grub.elf</i></li> + </ul> + <p> + Go back and disable option ROMs: + </p> + <ul> + <li>Devices / Run VGA Option ROMs = <i>disable</i></li> + <li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li> + </ul> + <p> + The resulting .config file was saved as resources/libreboot/config/<b>grub/macbook21/config</b> and is used by the build + scripts for this system. <b>This config is also used for the MacBook1,1</b>. + </p> + </div> + + <div class="subsection"> + <h3 id="config_qemu_i440fx_piix4"> + QEMU (x86 i440fx/piix4) configuration (file: resources/libreboot/config/grub/qemu_i440fx_piix4/config) + </h3> + <ul> + <li>General / Expert mode = <i>enable</i></li> + <li>Mainboard / Mainboard vendor = <i>Emulation</i></li> + <li>Mainboard / Mainboard model = <i>QEMU x86 i440fx/piix4 (aka qemu -M pc)</i></li> + <li>Mainboard / ROM chip size = <i>8192 KB (8 MB)</i></li> + <li>Devices / Use native graphics initialization = <i>enable</i> (should already be enabled)</li> + <li> + Display / Keep VESA framebuffer = <i>enable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer) + <ul> + <li>Libreboot provides this with framebuffer enabled by default, but it automatically patches a copy of the config at build time + to enable coreboot text-mode for a separate set of ROM images, in each system.</li> + </ul> + </li> + + <li>Payload / Add a payload = <i>An ELF executable payload</i></li> + <li>Payload / Payload path and filename = <i>grub.elf</i></li> + </ul> + <p> + Go back and disable option ROMs: + </p> + <ul> + <li>Devices / Run VGA Option ROMs = <i>disable</i></li> + <li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li> + </ul> + <p> + The resulting .config file was saved as resources/libreboot/config/<b>grub/qemu_i440fx_piix4/config</b> and is used by the build + scripts for this system. + </p> + </div> + + <div class="subsection"> + <h3 id="config_qemu_q35_ich9"> + QEMU (x86 q35/ich9) configuration (file: resources/libreboot/config/grub/qemu_q35_ich9/config) + </h3> + <ul> + <li>General / Expert mode = <i>enable</i></li> + <li>Mainboard / Mainboard vendor = <i>Emulation</i></li> + <li>Mainboard / Mainboard model = <i>QEMU x86 q35/ich9 (aka qemu -M q35)</i></li> + <li>Mainboard / ROM chip size = <i>8192 KB (8 MB)</i></li> + <li>Devices / Use native graphics initialization = <i>enable</i> (should already be enabled)</li> + <li> + Display / Keep VESA framebuffer = <i>enable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer) + <ul> + <li>Libreboot provides this with framebuffer enabled by default, but it automatically patches a copy of the config at build time + to enable coreboot text-mode for a separate set of ROM images, in each system.</li> + </ul> + </li> + + <li>Payload / Add a payload = <i>An ELF executable payload</i></li> + <li>Payload / Payload path and filename = <i>grub.elf</i></li> + </ul> + <p> + Go back and disable option ROMs: + </p> + <ul> + <li>Devices / Run VGA Option ROMs = <i>disable</i></li> + <li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li> + </ul> + <p> + The resulting .config file was saved as resources/libreboot/config/<b>grub/qemu_q35_ich9/config</b> and is used by the build + scripts for this system. + </p> + </div> <p><a href="#pagetop">Back to top of page.</a></p> |