aboutsummaryrefslogtreecommitdiff
path: root/docs
diff options
context:
space:
mode:
Diffstat (limited to 'docs')
-rw-r--r--docs/bsd/freebsd.md16
-rw-r--r--docs/bsd/netbsd.md16
-rw-r--r--docs/bsd/openbsd.md16
-rw-r--r--docs/future/index.md2
-rw-r--r--docs/git/index.md28
-rw-r--r--docs/gnulinux/configuring_parabola.md2
-rw-r--r--docs/gnulinux/encrypted_parabola.md10
-rw-r--r--docs/gnulinux/grub_boot_installer.md16
-rw-r--r--docs/gnulinux/grub_cbfs.md14
-rw-r--r--docs/grub/index.md8
-rw-r--r--docs/hcl/gm45_remove_me.md6
-rw-r--r--docs/hcl/index.md2
-rw-r--r--docs/hcl/t500.md2
-rw-r--r--docs/index.md2
-rw-r--r--docs/install/bbb_setup.md4
-rw-r--r--docs/misc/bbb_ehci.md22
-rw-r--r--docs/misc/index.md12
-rw-r--r--docs/misc/patch.md26
-rwxr-xr-xdocs/publish.sh2
19 files changed, 103 insertions, 103 deletions
diff --git a/docs/bsd/freebsd.md b/docs/bsd/freebsd.md
index 2241c916..4ff29a47 100644
--- a/docs/bsd/freebsd.md
+++ b/docs/bsd/freebsd.md
@@ -57,20 +57,20 @@ how to create the bootable FreeBSD USB drive:
Connect the USB drive. Check dmesg:
- \$ dmesg | tail
+ $ dmesg | tail
Check to confirm which drive it is, for example, if you think its sd3:
- \$ disklabel sd3
+ $ disklabel sd3
Check that it wasn't automatically mounted. If it was, unmount it. For
example:
- \$ doas umount /dev/sd3i
+ $ doas umount /dev/sd3i
dmesg told you what device it is. Overwrite the drive, writing the
FreeBSD installer to it with dd. For example:
- \$ doas dd if=freebsd.img of=/dev/rsdXc bs=1M; sync
+ $ doas dd if=freebsd.img of=/dev/rsdXc bs=1M; sync
You should now be able to boot the installer from your USB drive.
Continue reading, for information about how to do that.
@@ -83,21 +83,21 @@ the bootable FreeBSD USB drive:
Connect the USB drive. Check dmesg:
- \$ dmesg
+ $ dmesg
Check lsblk to confirm which drive it is:
- \$ lsblk
+ $ lsblk
Check that it wasn't automatically mounted. If it was, unmount it. For
example:
- \$ sudo umount /dev/sdX*
+ $ sudo umount /dev/sdX*
# umount /dev/sdX*
dmesg told you what device it is. Overwrite the drive, writing your
distro ISO to it with dd. For example:
- \$ sudo dd if=freebsd.img of=/dev/sdX bs=8M; sync
+ $ sudo dd if=freebsd.img of=/dev/sdX bs=8M; sync
# dd if=freebsd.img of=/dev/sdX bs=8M; sync
You should now be able to boot the installer from your USB drive.
diff --git a/docs/bsd/netbsd.md b/docs/bsd/netbsd.md
index 2de937a1..9d1dd517 100644
--- a/docs/bsd/netbsd.md
+++ b/docs/bsd/netbsd.md
@@ -53,20 +53,20 @@ to create the bootable NetBSD USB drive:
Connect the USB drive. Check dmesg:
- \$ dmesg | tail
+ $ dmesg | tail
Check to confirm which drive it is, for example, if you think its sd3:
- \$ disklabel sd3
+ $ disklabel sd3
Check that it wasn't automatically mounted. If it was, unmount it. For
example:
- \$ doas umount /dev/sd3i
+ $ doas umount /dev/sd3i
dmesg told you what device it is. Overwrite the drive, writing the
NetBSD installer to it with dd. For example:
- \$ doas netbsd.iso of=/dev/rsdXc bs=1M; sync
+ $ doas netbsd.iso of=/dev/rsdXc bs=1M; sync
You should now be able to boot the installer from your USB drive.
Continue reading, for information about how to do that.
@@ -79,21 +79,21 @@ the bootable NetBSD USB drive:
Connect the USB drive. Check dmesg:
- \$ dmesg
+ $ dmesg
Check lsblk to confirm which drive it is:
- \$ lsblk
+ $ lsblk
Check that it wasn't automatically mounted. If it was, unmount it. For
example:
- \$ sudo umount /dev/sdX*
+ $ sudo umount /dev/sdX*
# umount /dev/sdX*
dmesg told you what device it is. Overwrite the drive, writing your
distro ISO to it with dd. For example:
- \$ sudo dd if=install60.fs of=/dev/sdX bs=8M; sync
+ $ sudo dd if=install60.fs of=/dev/sdX bs=8M; sync
# dd if=netbsd.iso of=/dev/sdX bs=8M; sync
You should now be able to boot the installer from your USB drive.
diff --git a/docs/bsd/openbsd.md b/docs/bsd/openbsd.md
index 308a57f1..0bd07c2d 100644
--- a/docs/bsd/openbsd.md
+++ b/docs/bsd/openbsd.md
@@ -35,20 +35,20 @@ how to create the bootable LibertyBSD/OpenBSD USB drive:
Connect the USB drive. Check dmesg:
- \$ dmesg | tail
+ $ dmesg | tail
Check to confirm which drive it is, for example, if you think its sd3:
- \$ disklabel sd3
+ $ disklabel sd3
Check that it wasn't automatically mounted. If it was, unmount it. For
example:
- \$ doas umount /dev/sd3i
+ $ doas umount /dev/sd3i
dmesg told you what device it is. Overwrite the drive, writing the
OpenBSD installer to it with dd. For example:
- \$ doas dd if=install60.fs of=/dev/rsdXc bs=1M; sync
+ $ doas dd if=install60.fs of=/dev/rsdXc bs=1M; sync
You should now be able to boot the installer from your USB drive.
Continue reading, for information about how to do that.
@@ -78,21 +78,21 @@ the bootable OpenBSD USB drive:
Connect the USB drive. Check dmesg:
- \$ dmesg
+ $ dmesg
Check lsblk to confirm which drive it is:
- \$ lsblk
+ $ lsblk
Check that it wasn't automatically mounted. If it was, unmount it. For
example:
- \$ sudo umount /dev/sdX*
+ $ sudo umount /dev/sdX*
# umount /dev/sdX*
dmesg told you what device it is. Overwrite the drive, writing your
distro ISO to it with dd. For example:
- \$ sudo dd if=install60.fs of=/dev/sdX bs=8M; sync
+ $ sudo dd if=install60.fs of=/dev/sdX bs=8M; sync
# dd if=install60.fs of=/dev/sdX bs=8M; sync
You should now be able to boot the installer from your USB drive.
diff --git a/docs/future/index.md b/docs/future/index.md
index d7be7be3..535b5726 100644
--- a/docs/future/index.md
+++ b/docs/future/index.md
@@ -335,7 +335,7 @@ of=runningvga.bin skip=12 count=1**
Then do (and record the output):
- \$ ./intelvbttool runningvga.bin > intelvbttool\_out
+ $ ./intelvbttool runningvga.bin > intelvbttool\_out
Backup both files (runningvga.bin and intelvbttool\_out), renaming them
to match the system and LCD panel used.
diff --git a/docs/git/index.md b/docs/git/index.md
index 9fbfc15b..263a41bb 100644
--- a/docs/git/index.md
+++ b/docs/git/index.md
@@ -28,12 +28,12 @@ statically compiled executables for the utilities are included.**
For Debian Stretch (may also work on Debian Jessie), you can run the
following command:
- \$ sudo ./oldbuild dependencies debian
+ $ sudo ./oldbuild dependencies debian
(this will also work in Devuan)
For Parabola, you can run the following command:
- \$ sudo ./oldbuild dependencies parabola
+ $ sudo ./oldbuild dependencies parabola
or:
# **./oldbuild dependencies parabola**
@@ -57,18 +57,18 @@ Since libreboot makes extensive use of git, you need to configure git
properly. If you have not yet configured git, then the minimum
requirement is:
- \$ git config \--global user.name "Your Name"
- \$ git config \--global user.email your@emailaddress.com
+ $ git config \--global user.name "Your Name"
+ $ git config \--global user.email your@emailaddress.com
This is what will also appear in git logs if you ever commit your own
changes to a given repository. For more information, see
<http://git-scm.com/doc>.
Another nice config for you (optional, but recommended):
- \$ git config \--global core.editor nano
- \$ git config \--global color.status auto
- \$ git config \--global color.branch auto
- \$ git config \--global color.interactive auto
+ $ git config \--global core.editor nano
+ $ git config \--global color.status auto
+ $ git config \--global color.branch auto
+ $ git config \--global color.interactive auto
\$ **git config \--global color.diff auto**
After that, run the script:
@@ -220,13 +220,13 @@ modulename*. To see the possible values for *modulename*, use:
After that, build the ROM images (for all boards):
- \$ ./oldbuild roms withgrub
+ $ ./oldbuild roms withgrub
Alternatively, you can build for a specific board or set of boards. For
example:
- \$ ./oldbuild roms withgrub x60
- \$ ./oldbuild roms withgrub x200\_8mb
- \$ ./oldbuild roms withgrub x60 x200\_8mb
+ $ ./oldbuild roms withgrub x60
+ $ ./oldbuild roms withgrub x200\_8mb
+ $ ./oldbuild roms withgrub x60 x200\_8mb
The list of board options can be found by looking at the directory names
in **resources/libreboot/config/grub/**.
@@ -311,7 +311,7 @@ libreboot\_util, for:
If you are building binaries on a live system or chroot (for
flashrom/bucts), you can use the following to statically link them:
- \$ ./oldbuild module flashrom static
+ $ ./oldbuild module flashrom static
\$ **./oldbuild module bucts static**
The same conditions as above apply for ARM (except, building bucts on
@@ -323,7 +323,7 @@ restrictions).
The command that you used for generating the release archives will also
run the following command:
- \$ ./oldbuild release tobuild
+ $ ./oldbuild release tobuild
The archive **tobuild.tar.xz** will have been created under
**release/oldbuildsystem/**, containing bucts, flashrom and all other
required resources for building them.
diff --git a/docs/gnulinux/configuring_parabola.md b/docs/gnulinux/configuring_parabola.md
index 0612cd7d..918e98aa 100644
--- a/docs/gnulinux/configuring_parabola.md
+++ b/docs/gnulinux/configuring_parabola.md
@@ -638,7 +638,7 @@ start lxde without lxdm. Read
Open LXterminal:
- \$ cp /etc/skel/.xinitrc \~
+ $ cp /etc/skel/.xinitrc \~
Open .xinitrc and add the following plus a line break at the bottom of
the file.
diff --git a/docs/gnulinux/encrypted_parabola.md b/docs/gnulinux/encrypted_parabola.md
index 005def8c..20b7e02e 100644
--- a/docs/gnulinux/encrypted_parabola.md
+++ b/docs/gnulinux/encrypted_parabola.md
@@ -572,10 +572,10 @@ option at the end, with the name of your chosen chip is quotes.
You can check if everything is in there (*grub.cfg* and *grubtest.cfg*
would be really nice):
- \$ ./cbfstool libreboot.rom print
+ $ ./cbfstool libreboot.rom print
Extract grubtest.cfg:
- \$ ./cbfstool libreboot.rom extract -n grubtest.cfg -f grubtest.cfg
+ $ ./cbfstool libreboot.rom extract -n grubtest.cfg -f grubtest.cfg
And modify:
\$ **vi grubtest.cfg**
@@ -608,7 +608,7 @@ hardening your GRUB configuration, for security purposes.
Save your changes in grubtest.cfg, then delete the unmodified config
from the ROM image:
- \$ ./cbfstool libreboot.rom remove -n grubtest.cfg
+ $ ./cbfstool libreboot.rom remove -n grubtest.cfg
and insert the modified grubtest.cfg:
\$ **./cbfstool libreboot.rom add -n grubtest.cfg -f grubtest.cfg -t
@@ -656,10 +656,10 @@ grub.cfg**
Delete the grub.cfg that remained inside the ROM:
- \$ ./cbfstool libreboot.rom remove -n grub.cfg
+ $ ./cbfstool libreboot.rom remove -n grub.cfg
Add the modified version that you just made:
- \$ ./cbfstool libreboot.rom add -n grub.cfg -f grub.cfg -t raw
+ $ ./cbfstool libreboot.rom add -n grub.cfg -f grub.cfg -t raw
Now you have a modified ROM. Once more, refer to
<http://libreboot.org/docs/install/#flashrom>. Cd to the libreboot\_util
diff --git a/docs/gnulinux/grub_boot_installer.md b/docs/gnulinux/grub_boot_installer.md
index edd25715..8821f1ef 100644
--- a/docs/gnulinux/grub_boot_installer.md
+++ b/docs/gnulinux/grub_boot_installer.md
@@ -26,21 +26,21 @@ to create the bootable GNU+Linux USB drive:
Connect the USB drive. Check dmesg:
- \$ dmesg
+ $ dmesg
Check lsblk to confirm which drive it is:
- \$ lsblk
+ $ lsblk
Check that it wasn't automatically mounted. If it was, unmount it. For
example:
- \$ sudo umount /dev/sdX*
+ $ sudo umount /dev/sdX*
# umount /dev/sdX*
dmesg told you what device it is. Overwrite the drive, writing your
distro ISO to it with dd. For example:
- \$ sudo dd if=gnulinux.iso of=/dev/sdX bs=8M; sync
+ $ sudo dd if=gnulinux.iso of=/dev/sdX bs=8M; sync
# dd if=gnulinux.iso of=/dev/sdX bs=8M; sync
You should now be able to boot the installer from your USB drive.
@@ -71,20 +71,20 @@ how to create the bootable GNU+Linux USB drive:
Connect the USB drive. Check dmesg:
- \$ dmesg | tail
+ $ dmesg | tail
Check to confirm which drive it is, for example, if you think its sd3:
- \$ disklabel sd3
+ $ disklabel sd3
Check that it wasn't automatically mounted. If it was, unmount it. For
example:
- \$ doas umount /dev/sd3i
+ $ doas umount /dev/sd3i
dmesg told you what device it is. Overwrite the drive, writing the
OpenBSD installer to it with dd. For example:
- \$ doas dd if=gnulinux.iso of=/dev/rsdXc bs=1M; sync
+ $ doas dd if=gnulinux.iso of=/dev/rsdXc bs=1M; sync
You should now be able to boot the installer from your USB drive.
Continue reading, for information about how to do that.
diff --git a/docs/gnulinux/grub_cbfs.md b/docs/gnulinux/grub_cbfs.md
index 14f0ef5b..e51912f0 100644
--- a/docs/gnulinux/grub_cbfs.md
+++ b/docs/gnulinux/grub_cbfs.md
@@ -130,7 +130,7 @@ image file is named *libreboot.rom*, so please make sure to adapt.
ROM images are included pre-compiled in libreboot. You can also dump
your current firmware, using flashrom:
- \$ sudo flashrom -p internal -r libreboot.rom
+ $ sudo flashrom -p internal -r libreboot.rom
# flashrom -p internal -r libreboot.rom
If you are told to specify the chip, add the option **-c {your chip}**
to the command, for example:
@@ -144,7 +144,7 @@ Extract grubtest.cfg from the ROM image {#extract_testconfig}
You can check the contents of the ROM image, inside CBFS:
- \$ cd .../libreboot\_util/cbfstool** \$ ./cbfstool libreboot.rom
+ $ cd .../libreboot\_util/cbfstool** \$ ./cbfstool libreboot.rom
print**
The files *grub.cfg* and *grubtest.cfg* should be present. grub.cfg is
@@ -154,7 +154,7 @@ reduce the possibility of bricking your device, so DO NOT SKIP THIS!
Extract grubtest.cfg from the ROM image:
- \$ ./cbfstool libreboot.rom extract -n grubtest.cfg -f grubtest.cfg
+ $ ./cbfstool libreboot.rom extract -n grubtest.cfg -f grubtest.cfg
Modify the grubtest.cfg accordingly.
@@ -166,7 +166,7 @@ Re-insert the modified grubtest.cfg into the ROM image {#reinsert_modified_testc
Once your grubtest.cfg is modified and saved, delete the unmodified
config from the ROM image:
- \$ ./cbfstool libreboot.rom remove -n grubtest.cfg
+ $ ./cbfstool libreboot.rom remove -n grubtest.cfg
Next, insert the modified version:
@@ -182,7 +182,7 @@ Testing
[../install/#flashrom](../install/#flashrom) for information on how to
flash it.
- \$ cd /libreboot\_util** # **./flash update libreboot.rom
+ $ cd /libreboot\_util** # **./flash update libreboot.rom
Ocassionally, coreboot changes the name of a given board. If flashrom
complains about a board mismatch, but you are sure that you chose the
correct ROM image, then run this alternative command:
@@ -220,11 +220,11 @@ grub.cfg**
Delete the grub.cfg that remained inside the ROM:
- \$ ./cbfstool libreboot.rom remove -n grub.cfg
+ $ ./cbfstool libreboot.rom remove -n grub.cfg
Add the modified version that you just made:
- \$ ./cbfstool libreboot.rom add -n grub.cfg -f grub.cfg -t raw
+ $ ./cbfstool libreboot.rom add -n grub.cfg -f grub.cfg -t raw
**Now you have a modified ROM. Again, refer back to
[../install/#flashrom](../install/#flashrom) for information on how to
diff --git a/docs/grub/index.md b/docs/grub/index.md
index 48c8c0b7..ce3aa40a 100644
--- a/docs/grub/index.md
+++ b/docs/grub/index.md
@@ -41,12 +41,12 @@ one](http://sourceforge.net/projects/dejavu/files/dejavu/2.34/dejavu-fonts-ttf-2
This is a free font that is also contained in GNU+Linux distributions
like Debian, Devuan or Parabola.
- \$ cd libreboot\_src/grub
+ $ cd libreboot\_src/grub
compile grub (the build scripts info on how to do this)
come back out into libreboot\_src/resources/grub:
- \$ cd ../libreboot\_src/resources/grub/font
+ $ cd ../libreboot\_src/resources/grub/font
I took Dejavu Sans Mono from dejavu (included in this version of
libreboot) and did:
@@ -73,7 +73,7 @@ Keymaps are stored in resources/utilities/grub-assemble/keymap/.
Example (French Azerty):
- \$ ckbcomp fr > frazerty
+ $ ckbcomp fr > frazerty
Go in grub directory:
@@ -98,7 +98,7 @@ ukdvorak had to be created manually, based on usdvorak. diff them (under
resources/utilities/grub-assemble/keymap/original) to see how ukdvorak
file was created
- \$ cat ukdvorak | ./grub/grub-mklayout -o ukdvorak.gkb
+ $ cat ukdvorak | ./grub/grub-mklayout -o ukdvorak.gkb
Copyright © 2014 Leah Rowe <info@minifree.org>
diff --git a/docs/hcl/gm45_remove_me.md b/docs/hcl/gm45_remove_me.md
index 46eef08e..5fc8371b 100644
--- a/docs/hcl/gm45_remove_me.md
+++ b/docs/hcl/gm45_remove_me.md
@@ -38,7 +38,7 @@ ich9gen executables can be found under ./ich9deblob/ statically compiled
in libreboot\_util. If you are using src or git, build ich9gen from
source with:
- \$ ./oldbuild module ich9deblob
+ $ ./oldbuild module ich9deblob
The executable will appear under resources/utilities/ich9deblob/
Run:
@@ -70,7 +70,7 @@ onboard ethernet chipset is flashed (inside the ROM image). You should
generate a descriptor+gbe image with your own MAC address inside (with
the Gbe checksum updated to match). Run:
- \$ ./ich9gen \--macaddress XX:XX:XX:XX:XX:XX
+ $ ./ich9gen \--macaddress XX:XX:XX:XX:XX:XX
(replace the XX chars with the hexadecimal chars in the MAC address that
you want)
@@ -170,7 +170,7 @@ under resources/utilities/ich9deblob/ and will already be compiled if
you ran **./oldbuild module all** or **./oldbuild module ich9deblob**
from the main directory (./), otherwise you can build it like so:
- \$ ./oldbuild module ich9deblob
+ $ ./oldbuild module ich9deblob
An executable file named **ich9deblob** will now appear under
resources/utilities/ich9deblob/
diff --git a/docs/hcl/index.md b/docs/hcl/index.md
index a9e599d4..ec85fdbb 100644
--- a/docs/hcl/index.md
+++ b/docs/hcl/index.md
@@ -407,7 +407,7 @@ for whatever reason, since they include a lot of useful information.
Backups created using wget:
- \$ wget -m -p -E -k -K -np http://macbook.donderklumpen.de/
+ $ wget -m -p -E -k -K -np http://macbook.donderklumpen.de/
**\$ wget -m -p -E -k -K -np
http://macbook.donderklumpen.de/coreboot/**
diff --git a/docs/hcl/t500.md b/docs/hcl/t500.md
index 3763cfe7..0d0c3f54 100644
--- a/docs/hcl/t500.md
+++ b/docs/hcl/t500.md
@@ -71,7 +71,7 @@ factory.rom image dumped from the T500 with a SOIC-8 4MiB flash chip.
The patch re-creates the X200 descriptor/gbe source, so the commands
were something like:
- \$ diff -u t500gbe x200gbe
+ $ diff -u t500gbe x200gbe
\$ **diff -u t500descriptor x200descriptor**
ME VSCC table is in a different place and a different size on the T500.
diff --git a/docs/index.md b/docs/index.md
index 40748008..590cde0b 100644
--- a/docs/index.md
+++ b/docs/index.md
@@ -177,7 +177,7 @@ If it exists, you can also extract this *lbversion* file by using the
either dumped or haven't flashed yet. In your distribution, run
cbfstool on your ROM image (*libreboot.rom*, in this example):
- \$ ./cbfstool libreboot.rom extract -n lbversion -f lbversion
+ $ ./cbfstool libreboot.rom extract -n lbversion -f lbversion
You will now have a file, named *lbversion*, which you can read in
whatever program it is that you use for reading/writing text files.
diff --git a/docs/install/bbb_setup.md b/docs/install/bbb_setup.md
index 4517eb6c..56608d04 100644
--- a/docs/install/bbb_setup.md
+++ b/docs/install/bbb_setup.md
@@ -189,8 +189,8 @@ contents of this file with:
#!/bin/sh -e
### BEGIN INIT INFO
# Provides: led_aging.sh
- # Required-Start: \$local_fs
- # Required-Stop: \$local_fs
+ # Required-Start: $local_fs
+ # Required-Stop: $local_fs
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Start LED aging
diff --git a/docs/misc/bbb_ehci.md b/docs/misc/bbb_ehci.md
index 5ff5f820..fdfab7d0 100644
--- a/docs/misc/bbb_ehci.md
+++ b/docs/misc/bbb_ehci.md
@@ -134,13 +134,13 @@ arm-linux-gnueabihf setup on your *host*.
<!-- -->
- \$ cd \$work_dir
- \$ git clone https://github.com/beagleboard/kernel.git
- \$ cd kernel
- \$ git checkout \$mav (see above)
- \$ ./patch.sh
- \$ wget http://arago-project.org/git/projects/?p=am33x-cm3.git\;a=blob_plain\;f=bin/am335x-pm-firmware.bin\;hb=HEAD -O kernel/firmware/am335x-pm-firmware.bin
- \$ cp configs/beaglebone kernel/arch/arm/configs/beaglebone_defconfig
+ $ cd \$work_dir
+ $ git clone https://github.com/beagleboard/kernel.git
+ $ cd kernel
+ $ git checkout \$mav (see above)
+ $ ./patch.sh
+ $ wget http://arago-project.org/git/projects/?p=am33x-cm3.git\;a=blob_plain\;f=bin/am335x-pm-firmware.bin\;hb=HEAD -O kernel/firmware/am335x-pm-firmware.bin
+ $ cp configs/beaglebone kernel/arch/arm/configs/beaglebone_defconfig
- Download the patch from
[here](http://www.coreboot.org/images/8/88/Ehci-debug-gadget-patches.tar.gz)
@@ -150,7 +150,7 @@ arm-linux-gnueabihf setup on your *host*.
the two different version of the kernel (3.8 and 3.10). I will use
3.8. (If using kernel 3.12 patch\_1 is not needed)
- cd kernel (note that this is one more level: you should be in
- \$work\_dir/kernel/kernel)
+ $work\_dir/kernel/kernel)
- Apply the patches:
<!-- -->
@@ -180,12 +180,12 @@ arm-linux-gnueabihf setup on your *host*.
<!-- -->
- \$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- -j4 (is it possoble to build only the gadget modules)
- \$ mkdir ../tmp && make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- INSTALL_MOD_PATH=../tmp modules_install
+ $ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- -j4 (is it possoble to build only the gadget modules)
+ $ mkdir ../tmp && make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- INSTALL_MOD_PATH=../tmp modules_install
- on BBB, backup /lib/modules/3.8.13-bone70/kernel/drivers/usb/gadget
(i.e. mv /lib/modules/3.8.13-bone70/kernel/drivers/usb/gadget
- \$HOME)
+ $HOME)
- copy the freshly compiled usb/gadget dir to
/lib/modules/3.8.13-bone70/kernel/drivers/usb
- restart BBB
diff --git a/docs/misc/index.md b/docs/misc/index.md
index 096842df..e97650e1 100644
--- a/docs/misc/index.md
+++ b/docs/misc/index.md
@@ -50,7 +50,7 @@ GRUB. These consume power. Stop using them!
Be root
- \$ su -
+ $ su -
Installed powertop:
@@ -99,7 +99,7 @@ USB Serial adapter.
On the 2nd system, you can try this (using GNU Screen):
- \$ sudo screen /dev/ttyUSB0 115200
+ $ sudo screen /dev/ttyUSB0 115200
How to quit GNU Screen: Ctrl+A then release and press K, and then press
Y.
@@ -215,12 +215,12 @@ behaviour.
Disable or enable beeps when removing/adding the charger:
- \$ sudo ./nvramtool -w power\_management\_beeps=Enable
+ $ sudo ./nvramtool -w power\_management\_beeps=Enable
\$ **sudo ./nvramtool -w power\_management\_beeps=Disable**
Disable or enable beeps when battery is low:
- \$ sudo ./nvramtool -w low\_battery\_beep=Enable
+ $ sudo ./nvramtool -w low\_battery\_beep=Enable
\$ **sudo ./nvramtool -w low\_battery\_beep=Disable**
A reboot is required, for these changes to take effect.
@@ -234,11 +234,11 @@ Or look in **/sys/class/drm/card0-LVDS-1/edid**
Alternatively you can use i2cdump. In Debian and Devuan, this is in the
package i2c-tools.
- \$ sudo modprobe i2c-dev
+ $ sudo modprobe i2c-dev
\$ **sudo i2cdump -y 5 0x50** (you might have to change the value for
-y)
- \$ sudo rmmod i2c-dev
+ $ sudo rmmod i2c-dev
You'll see the panel name in the output (from the EDID dump).
If neither of these options work (or they are unavailable), physically
diff --git a/docs/misc/patch.md b/docs/misc/patch.md
index 6164986c..318c7428 100644
--- a/docs/misc/patch.md
+++ b/docs/misc/patch.md
@@ -9,12 +9,12 @@ Apply a patch
To apply a patch to a single file, do that in it's directory:
- \$ patch < foo.patch
+ $ patch < foo.patch
Assuming that the patch is distributed in unified format identifying the
file the patch should be applied to, the above will work. Otherwise:
- \$ patch foo.txt < bar.patch
+ $ patch foo.txt < bar.patch
You can apply a patch to an entire directory, but note the "p level".
What this means is that inside patch files will be the files that you
@@ -24,7 +24,7 @@ where the patch was created. 'p' level instructs the 'patch' utility
to ignore parts of the path name to identify the files correctly.
Usually a p level of 1 will work, so you would use:
- \$ patch -p1 < baz.patch
+ $ patch -p1 < baz.patch
Change to the top level directory before running this. If a patch level
of 1 cannot identify the files to patch, then inspect the patch file for
@@ -34,7 +34,7 @@ file names. For example:
and you are working in a directory that contains panic/yet.c, use:
- \$ patch -p5 < baz.patch
+ $ patch -p5 < baz.patch
You usually count one up for each path separator (forward slash) removed
from the beginning of the path, until you are left with a path that
@@ -42,7 +42,7 @@ exists in the current working directory. The count is the p level.
Removing a patch using the -R flag
- \$ patch -p5 -R < baz.patch
+ $ patch -p5 -R < baz.patch
[Back to top of page.](#pagetop)
@@ -51,15 +51,15 @@ Create a patch with diff
Diff can create a patch for a single file:
- \$ diff -u original.c new.c > original.patch
+ $ diff -u original.c new.c > original.patch
For diff'ing a source tree:
- \$ cp -R original new
+ $ cp -R original new
Do whatever you want in new/ and then diff it:
- \$ diff -rupN original/ new/ > original.patch
+ $ diff -rupN original/ new/ > original.patch
[Back to top of page.](#pagetop)
@@ -72,15 +72,15 @@ Note: this won't show new files created.
Just make whatever changes you want to a git clone and then:
- \$ git diff > patch.git
+ $ git diff > patch.git
Note the git revision that you did this with:
- \$ git log
+ $ git log
Alternatively (better yet), commit your changes and then use:
- \$ git format-patch -N
+ $ git format-patch -N
Replace N with the number of commits that you want to show.
[Back to top of page.](#pagetop)
@@ -93,11 +93,11 @@ it really is.
Now to apply that patch in the future, just git clone it again and do
with the git revision you found from above:
- \$ git reset \--hard REVISIONNUMBER
+ $ git reset \--hard REVISIONNUMBER
Now put patch.git in the git clone directory and do:
- \$ git apply patch.git
+ $ git apply patch.git
If you use a patch from git format-patch, then use **git am patch.git**
instead of **git apply patch.git**. git-am will re-create the commits
diff --git a/docs/publish.sh b/docs/publish.sh
index a4ea7030..c634f30b 100755
--- a/docs/publish.sh
+++ b/docs/publish.sh
@@ -7,4 +7,4 @@ echo $FILE
cat $FILE.md > temp.md
sed temp.md -i -e 's/.md\(#[a-z\-]*\)*)/.html\1)/g'
TOC=$(grep -q "^x-toc-enable: true$" temp.md && echo "--toc")
-pandoc -t html temp.md -s --css global.css --section-divs -T Libreboot $TOC > $FILE.html
+pandoc -t html temp.md -s --css /global.css --section-divs -T Libreboot $TOC > $FILE.html
generated by cgit v1.2.3-70-g09d2 (git 2.47.0) at 2024-11-22 10:37:09 +0000