diff options
Diffstat (limited to 'i18n/fr_FR/docs/hardware/kcma-d8.md')
-rw-r--r-- | i18n/fr_FR/docs/hardware/kcma-d8.md | 151 |
1 files changed, 83 insertions, 68 deletions
diff --git a/i18n/fr_FR/docs/hardware/kcma-d8.md b/i18n/fr_FR/docs/hardware/kcma-d8.md index fb7e6eed..e060b912 100644 --- a/i18n/fr_FR/docs/hardware/kcma-d8.md +++ b/i18n/fr_FR/docs/hardware/kcma-d8.md @@ -1,104 +1,119 @@ --- -title: ASUS KCMA-D8 desktop/workstation board +title: Carte mère de PC bureau/station de travail ASUS KCMA-D8 ... -This is a desktop board using AMD hardware (Fam10h *and Fam15h* CPUs -available). It can also be used for building a high-powered workstation. -Powered by libreboot. The coreboot port was done by Timothy Pearson of -Raptor Engineering Inc. and, working with them, merged into libreboot. +C'est une carte mère de bureau support du matériel AMD (processeurs Fam10h *et +Fam15h* disponibles). Elle peut être aussi utilisé pour construire une station +de travail hautement performantes. +Fonctionnant sous Libreboot. +L'adaption de coreboot a été faite par Timothy Pearson de l'entreprise Raptor +Engineering, et , nous travaillant avec eux, fusionné dans Libreboot. -*Memory initialization is still problematic, for some modules. We -recommend avoiding Kingston modules.* +L'initialisation de la mémoire est encore problématique, pour quelques +barettes. Nous recommandons d'éviter les modules Kingston.* -Flashing instructions can be found at -[../install/\#flashrom](../install/#flashrom) - note that external -flashing is required (e.g. BBB), if the proprietary (ASUS) firmware is -currently installed. If you already have libreboot, by default it is -possible to re-flash using software running in GNU+Linux on the kcma-d8, -without using external hardware. +Les instructions de flashage peuvent être trouvée dans +[../install/\#flashrom](../install/#flashrom) - notez que le flashage externe +est requis (p.e. BBB), si le micrologiciel propriétaire d'ASUS est installé +sur le moment. Si vous avez déjà libreboot, il est par défaut possible de +re-flasher par voie logicielle depuis GNU+Linux sur kcma-d18, sans utiliser de +matériel extérieurs.* -CPU compatibility +Compatilibilité des processeurs ================= +*Utilisez l'Opteron 4200 series (marchent sans mises à jour du microcode, +incluant la virtualisation matérielle)*. -*Use Opteron 4200 series (works without microcode updates, including hw -virt).* 4300 series needs microcode updates, so avoid those CPUs. 4100 -series is too old, and mostly untested. +Le 4300 series a besoin de mises à jour du microcode, donc éviter ces CPUs. +Les 4100 séries sont trop vieux, et majoritairement non testés. -Board status (compatibility) {#boardstatus} +Status de la carte mère (niveau compatibilité) {#boardstatus} ============================ -See <https://raptorengineeringinc.com/coreboot/kcma-d8-status.php>. +Voyez <https://raptorengineeringinc.com/coreboot/kcma-d8-status.php>. -Form factor {#formfactor} +Facteur de forme / format {#formfactor} =========== -This board is ATX form factor. While the [ATX standard, version 2.2](https://web.archive.org/web/20120725150314/http://www.formfactors.org/developer/specs/atx2_2.pdf) -specifies board dimensions 305mm x 244mm, this board measures 305mm x 253mm; -ensure your case supports this extra ~centimeter in width. +Cette carte mère utilise le format ATX. Bien que la [version 2.2 du standard +ATX](https://web.archive.org/web/20120725150314/http://www.formfactors.org/developer/specs/atx2_2.pdf) +spécifié des dimensions de carte mères de 305mm x 244mm, cette carte mesure +305mm x 253mm; assurez-vous que votre boîtier supporte ces centimètre de plus +en largeur. -IPMI iKVM module add-on {#ipmi} +Extension IPMI iKVM {#ipmi} ======================= -Don't use it. It uses proprietary firmware and adds a backdoor (remote -out-of-band management chip, similar to the [Intel Management -Engine](../../faq.md#intelme). Fortunately, the firmware is -unsigned (possibly to replace) and physically separate from the -mainboard since it's on the add-on module, which you don't have to -install. +Ne l'utlilisez pas. Ça utilise du micrologiciel propriétaire et ajoute une +porte dérobée (une puce d'administration hors bandes, similaire à l'[Intel +Management Engine](../../faq.md#intelme). +Heuresement, le micrologiciel est non signé (possiblement pour faciliter le +remplaçage) et physiquement séparé, puisque c'est une extension que vous +n'avez pas à installer. -Flash chips {#flashchips} +Puces de flashage {#flashchips} =========== -2MiB flash chips are included by default, on these boards. It's on a -P-DIP 8 slot (SPI chip). The flash chip can be upgraded to higher sizes: -4MiB, 8MiB or 16MiB. With at least 8MiB, you could feasibly fit a -compressed linux+initramfs image (BusyBox+Linux system) into CBFS and -boot that, loading it into memory. +Les puces de flashage de 2Mo sont inclues par défaut sur ces cartes mères. +C'est sur un P-DIP à 8 emplacements (puce SPI). +La puce flash peut être amélioré vers une plus grande taille : +4Mo, 8Mo ou 16Mo. +Avec au moins 8Mo, il est faisaible que vous faites rentrer une image +compressé linux+initramfs (système Linux+BusyBox) dans CBFS et démarrer sur +ça, se chargeant ensuite dans la mémoire. -Libreboot has configs for 2, 4, 8 and 16 MiB flash chip sizes (default -flash chip is 2MiB). +Libreboot a des configurations pour des tailles de puces de 2, 4, 8 et 16Mo ( +la puce flash par défaut fait 2Mo). -*DO NOT hot-swap the chip with your bare hands. Use a P-DIP 8 chip -extractor. These can be found online. See +*NE RETIREZ PAS la puce avec vos mains nues. Utilisez un extracteur de puce +P-DIP 8. Ceux-ci s'achètent en ligne: Jetez un coup d'oeil à <http://www.coreboot.org/Developer_Manual/Tools#Chip_removal_tools>* -Native graphics initialization {#graphics} +Initialisation natives des graphiques {#graphics} ============================== +Seulement le mode texte est connu pour marcher, mais le kernel(linux) peut +initialiser le tampon d'affichage (si KMS est activé + Only text-mode is known to work, but linux(kernel) can initialize the framebuffer display (if it has KMS - kernel mode setting). -Current issues {#issues} +Problèmes en ce moment {#issues} ============== -- LRDIMM memory modules are currently incompatible -- SAS (via PIKE 2008 module) requires non-free option ROM (and - SeaBIOS) to boot from it (theoretically possible to replace, but you - can put a kernel in CBFS or on SATA and use that to boot GNU, which - can be on a SAS drive. The linux kernel can use those SAS drives - (via PIKE module) without an option ROM). - -- IPMI iKVM module (optional add-on card) uses proprietary firmware. - Since it's for remote out-of-band management, it's theoretically a - backdoor similar to the Intel Management Engine. Fortunately, unlike - the ME, this firmware is unsigned which means that a free - replacement is theoretically possible. For now, the libreboot - project recommends not installing the module. [This - project](https://github.com/facebook/openbmc) might be interesting - to derive from, for those who want to work on a free replacement. In - practise, out-of-band management isn't very useful anyway (or at - the very least, it's not a major inconvenience to not have it). -- Graphics: only text-mode works. See [\#graphics](#graphics) - -Hardware specifications {#specifications} +- Les modules mémoires LRDIMM sont pour le moment incompatibles. +- Le SAS (SCSI, via le module PIKE 2008) nécessite une ROM (et SeaBIOS) + optionnelle et propriétaire pour démarrer dessus (théoriquement possible + de remplacer, mais vous pouvez mettre un kernel dans CBFS ou sur SATA et + utilisez ça pour démarrer sur GNU, qui peut marcher sur un disque SAS. Le + kernel linux peut utiliser ces disques SAS (via le module PIKE sans une + ROM optionnelle). + + +- Le module IPMI iKVM (extension de carte optionnelle) utilise un + micrologiciel propriétaire. Puisque c'est pour une administration + hors-bande, c'est théoriquement une porte dérobée similaire similaire à + l'Intel Management Engine. Heuresement, contrairement à la ME, ce + micrologiciel n'est pas signé voulant dire qu'un remplacement par du libre + est théoriquement possible. + Pour l'instant, le project libreboot recommande de ne pas installer le + module. [Ce projet](https://github.com/facebook/openbmc) pourrait être + intéressant en tant que base sur laquelle dériver pour ceux voulant + travailler sur un remplacement libre. + En pratique, l'administration hors-bande n'est pas très utile de toute + façon (ce n'est pas un handicap de ne pas l'avoir). +- Graphiques: seulement le mode texte marche. Jetez un coup à la section + [\#graphique](#graphics) + +Caractéristiques techniques {#specifications} ----------------------- -Check the ASUS website. +[Jetez un coup d'oeil sur le site web d'ASUS](https://www.asus.com/Commercial-Servers-Workstations/KCMAD8/specifications/). Copyright © 2016 Leah Rowe <info@minifree.org>\ -Permission is granted to copy, distribute and/or modify this document -under the terms of the GNU Free Documentation License Version 1.3 or any later -version published by the Free Software Foundation -with no Invariant Sections, no Front Cover Texts, and no Back Cover Texts. -A copy of this license is found in [../fdl-1.3.md](../fdl-1.3.md) +Permission est donnée de copier, distribuer et/ou modifier ce document +sous les termes de la Licence de documentation libre GNU version 1.3 ou +quelconque autre versions publiées plus tard par la Free Software Foundation +sans Sections Invariantes, Textes de Page de Garde, et Textes de Dernière de Couverture. +Une copie de cette license peut être trouvé dans [../fdl-1.3.md](fdl-1.3.md). |