diff options
Diffstat (limited to 'resources/libreboot/patch/kgpe-d16/0048-southbridge-amd-sb700-Add-AHCI-support.patch')
| -rw-r--r-- | resources/libreboot/patch/kgpe-d16/0048-southbridge-amd-sb700-Add-AHCI-support.patch | 656 |
1 files changed, 656 insertions, 0 deletions
diff --git a/resources/libreboot/patch/kgpe-d16/0048-southbridge-amd-sb700-Add-AHCI-support.patch b/resources/libreboot/patch/kgpe-d16/0048-southbridge-amd-sb700-Add-AHCI-support.patch new file mode 100644 index 00000000..ed4bd522 --- /dev/null +++ b/resources/libreboot/patch/kgpe-d16/0048-southbridge-amd-sb700-Add-AHCI-support.patch @@ -0,0 +1,656 @@ +From 5c3cca2a8c938c140d6d217fd3fa9a646713678c Mon Sep 17 00:00:00 2001 +From: Timothy Pearson <tpearson@raptorengineeringinc.com> +Date: Tue, 9 Jun 2015 18:09:50 -0500 +Subject: [PATCH 048/139] southbridge/amd/sb700: Add AHCI support + +Change-Id: I147284e6a435f4b96d6821a122c1f4f9ddc2ea33 +Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> +--- + src/include/device/pci_ids.h | 2 + + src/mainboard/asus/kgpe-d16/Kconfig | 4 + + src/mainboard/asus/kgpe-d16/cmos.default | 1 + + src/mainboard/asus/kgpe-d16/cmos.layout | 3 +- + src/southbridge/amd/sb700/Kconfig | 4 + + src/southbridge/amd/sb700/early_setup.c | 73 ++++++--- + src/southbridge/amd/sb700/ide.c | 42 +++-- + src/southbridge/amd/sb700/sata.c | 256 +++++++++++++++++++++---------- + src/southbridge/amd/sb800/fadt.c | 1 + + 9 files changed, 267 insertions(+), 119 deletions(-) + +diff --git a/src/include/device/pci_ids.h b/src/include/device/pci_ids.h +index fcaf4aa..664ac49 100644 +--- a/src/include/device/pci_ids.h ++++ b/src/include/device/pci_ids.h +@@ -311,6 +311,8 @@ + + #define PCI_DEVICE_ID_ATI_SB700_LPC 0x439D + #define PCI_DEVICE_ID_ATI_SB700_SATA 0x4390 ++#define PCI_DEVICE_ID_ATI_SB700_SATA_AHCI 0x4391 ++#define PCI_DEVICE_ID_ATI_SB700_SATA_AHCI_AMD 0x4394 + #define PCI_DEVICE_ID_ATI_SB700_IDE 0x439C + #define PCI_DEVICE_ID_ATI_SB700_HDA 0x4383 + #define PCI_DEVICE_ID_ATI_SB700_PCI 0x4384 +diff --git a/src/mainboard/asus/kgpe-d16/Kconfig b/src/mainboard/asus/kgpe-d16/Kconfig +index 8906dee..75bf0ee 100644 +--- a/src/mainboard/asus/kgpe-d16/Kconfig ++++ b/src/mainboard/asus/kgpe-d16/Kconfig +@@ -89,6 +89,10 @@ config IRQ_SLOT_COUNT + int + default 13 + ++config SOUTHBRIDGE_AMD_SB700_SATA_PORT_COUNT_BITFIELD ++ hex ++ default 0x3f ++ + config ONBOARD_VGA_IS_PRIMARY + bool + default y +diff --git a/src/mainboard/asus/kgpe-d16/cmos.default b/src/mainboard/asus/kgpe-d16/cmos.default +index e3eb4fe..5bfaadd 100644 +--- a/src/mainboard/asus/kgpe-d16/cmos.default ++++ b/src/mainboard/asus/kgpe-d16/cmos.default +@@ -16,6 +16,7 @@ interleave_nodes = Disable + interleave_memory_channels = Enable + cpu_c_states = Enable + cpu_cc6_state = Enable ++sata_ahci_mode = Enable + ieee1394 = Enable + power_on_after_fail = On + boot_option = Fallback +diff --git a/src/mainboard/asus/kgpe-d16/cmos.layout b/src/mainboard/asus/kgpe-d16/cmos.layout +index 7f9f661..247fd7b 100644 +--- a/src/mainboard/asus/kgpe-d16/cmos.layout ++++ b/src/mainboard/asus/kgpe-d16/cmos.layout +@@ -45,7 +45,8 @@ entries + 464 1 e 2 compute_unit_siblings + 465 1 e 1 cpu_c_states + 466 1 e 1 cpu_cc6_state +-467 1 r 0 allow_spd_nvram_cache_restore ++467 1 e 1 sata_ahci_mode ++468 1 r 0 allow_spd_nvram_cache_restore + 477 1 e 1 ieee1394 + 728 256 h 0 user_data + 984 16 h 0 check_sum +diff --git a/src/southbridge/amd/sb700/Kconfig b/src/southbridge/amd/sb700/Kconfig +index f56f84a..92fb9ab 100644 +--- a/src/southbridge/amd/sb700/Kconfig ++++ b/src/southbridge/amd/sb700/Kconfig +@@ -46,6 +46,10 @@ config SOUTHBRIDGE_AMD_SB700_DISABLE_ISA_DMA + bool + default n + ++config SOUTHBRIDGE_AMD_SB700_SATA_PORT_COUNT_BITFIELD ++ hex ++ default 0xf ++ + config EHCI_BAR + hex + default 0xfef00000 +diff --git a/src/southbridge/amd/sb700/early_setup.c b/src/southbridge/amd/sb700/early_setup.c +index fd3b099..a06a72f 100644 +--- a/src/southbridge/amd/sb700/early_setup.c ++++ b/src/southbridge/amd/sb700/early_setup.c +@@ -354,9 +354,13 @@ static void sb700_devices_por_init(void) + { + device_t dev; + u8 byte; +-#if CONFIG_SOUTHBRIDGE_AMD_SUBTYPE_SP5100 +- u32 dword; +-#endif ++ uint32_t dword; ++ uint8_t nvram; ++ uint8_t sata_ahci_mode; ++ ++ sata_ahci_mode = 0; ++ if (get_option(&nvram, "sata_ahci_mode") == CB_SUCCESS) ++ sata_ahci_mode = !!nvram; + + printk(BIOS_INFO, "sb700_devices_por_init()\n"); + /* SMBus Device, BDF:0-20-0 */ +@@ -517,34 +521,56 @@ static void sb700_devices_por_init(void) + /* Enable PCIB_DUAL_EN_UP will fix potential problem with PCI cards. */ + pci_write_config8(dev, 0x50, 0x01); + ++ if (!sata_ahci_mode){ + #if CONFIG_SOUTHBRIDGE_AMD_SUBTYPE_SP5100 +- /* SP5100 default SATA mode is RAID5 MODE */ +- dev = pci_locate_device(PCI_ID(0x1002, 0x4393), 0); +- /* Set SATA Operation Mode, Set to IDE mode */ +- byte = pci_read_config8(dev, 0x40); +- byte |= (1 << 0); +- pci_write_config8(dev, 0x40, byte); ++ /* SP5100 default SATA mode is RAID5 MODE */ ++ dev = pci_locate_device(PCI_ID(0x1002, 0x4393), 0); ++ ++ /* Set SATA Operation Mode, Set to IDE mode */ ++ byte = pci_read_config8(dev, 0x40); ++ byte |= (1 << 0); ++ pci_write_config8(dev, 0x40, byte); + +- dword = 0x01018f00; +- pci_write_config32(dev, 0x8, dword); ++ dword = 0x01018f00; ++ pci_write_config32(dev, 0x8, dword); + +- /* set SATA Device ID writable */ +- dword = pci_read_config32(dev, 0x40); +- dword &= ~(1 << 24); +- pci_write_config32(dev, 0x40, dword); ++ /* set SATA Device ID writable */ ++ dword = pci_read_config32(dev, 0x40); ++ dword &= ~(1 << 24); ++ pci_write_config32(dev, 0x40, dword); + +- /* set Device ID accommodate with IDE emulation mode configuration*/ +- pci_write_config32(dev, 0x0, 0x43901002); ++ /* set Device ID consistent with IDE emulation mode configuration */ ++ pci_write_config32(dev, 0x0, 0x43901002); + +- /* rpr v2.13 4.17 Reset CPU on Sync Flood */ +- abcfg_reg(0x10050, 1 << 2, 1 << 2); ++ /* rpr v2.13 4.17 Reset CPU on Sync Flood */ ++ abcfg_reg(0x10050, 1 << 2, 1 << 2); + #endif ++ } + + /* SATA Device, BDF:0-17-0, Non-Raid-5 SATA controller */ +- printk(BIOS_INFO, "sb700_devices_por_init(): SATA Device, BDF:0-18-0\n"); ++ printk(BIOS_INFO, "sb700_devices_por_init(): SATA Device, BDF:0-17-0\n"); + dev = pci_locate_device(PCI_ID(0x1002, 0x4390), 0); + +- /*PHY Global Control*/ ++ if (sata_ahci_mode) { ++ /* Switch to AHCI mode (AMD inbox) */ ++ dword = pci_read_config32(dev, 0x40); ++ dword |= (0x1 << 24); /* Lock Flash Device ID = 1 */ ++ pci_write_config32(dev, 0x40, dword); ++ ++ /* Deactivate Sub-Class Code write protection */ ++ byte = pci_read_config8(dev, 0x40); ++ byte |= (1 << 0); ++ pci_write_config8(dev, 0x40, byte); ++ ++ dword = pci_read_config32(dev, 0x08); ++ dword &= ~(0xff << 16); /* Sub-Class Code = 0x6 */ ++ dword |= (0x6 << 16); ++ dword &= ~(0xff << 8); /* Operating Mode Selection = 0x1 */ ++ dword |= (0x1 << 8); ++ pci_write_config32(dev, 0x08, dword); ++ } ++ ++ /* PHY Global Control */ + pci_write_config16(dev, 0x86, 0x2C00); + } + +@@ -695,6 +721,11 @@ static void sb700_pci_cfg(void) + + /* SATA Device, BDF:0-17-0, Non-Raid-5 SATA controller */ + dev = pci_locate_device(PCI_ID(0x1002, 0x4390), 0); ++ if (dev == PCI_DEV_INVALID) ++ dev = pci_locate_device(PCI_ID(0x1002, 0x4391), 0); ++ if (dev == PCI_DEV_INVALID) ++ dev = pci_locate_device(PCI_ID(0x1002, 0x4394), 0); ++ + /* rpr7.12 SATA MSI and D3 Power State Capability. */ + byte = pci_read_config8(dev, 0x40); + byte |= 1 << 0; +diff --git a/src/southbridge/amd/sb700/ide.c b/src/southbridge/amd/sb700/ide.c +index 8803d7f..4e07717 100644 +--- a/src/southbridge/amd/sb700/ide.c ++++ b/src/southbridge/amd/sb700/ide.c +@@ -1,6 +1,7 @@ + /* + * This file is part of the coreboot project. + * ++ * Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify +@@ -22,6 +23,7 @@ + #include <device/pci.h> + #include <device/pci_ids.h> + #include <device/pci_ops.h> ++#include <option.h> + #include "sb700.h" + + static void ide_init(struct device *dev) +@@ -30,6 +32,12 @@ static void ide_init(struct device *dev) + /* Enable ide devices so the linux ide driver will work */ + u32 dword; + u8 byte; ++ uint8_t nvram; ++ uint8_t sata_ahci_mode; ++ ++ sata_ahci_mode = 0; ++ if (get_option(&nvram, "sata_ahci_mode") == CB_SUCCESS) ++ sata_ahci_mode = !!nvram; + + conf = dev->chip_info; + +@@ -39,25 +47,25 @@ static void ide_init(struct device *dev) + dword &= ~(1 << 16); + pci_write_config32(dev, 0x70, dword); + +- /* Enable UDMA on all devices, it will become UDMA0 (default PIO is PIO0) */ +- byte = pci_read_config8(dev, 0x54); +- byte |= 0xf; +- pci_write_config8(dev, 0x54, byte); +- +- /* Enable I/O Access&& Bus Master */ +- dword = pci_read_config16(dev, 0x4); +- dword |= 1 << 2; +- pci_write_config16(dev, 0x4, dword); +- +- /* set ide as primary, if you want to boot from IDE, you'd better set it +- * in $vendor/$mainboard/devicetree.cb */ ++ if (!sata_ahci_mode) { ++ /* Enable UDMA on all devices, it will become UDMA0 (default PIO is PIO0) */ ++ byte = pci_read_config8(dev, 0x54); ++ byte |= 0xf; ++ pci_write_config8(dev, 0x54, byte); + ++ /* Enable I/O Access&& Bus Master */ ++ dword = pci_read_config16(dev, 0x4); ++ dword |= 1 << 2; ++ pci_write_config16(dev, 0x4, dword); + +- if (conf->boot_switch_sata_ide == 1) { +- struct device *sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); +- byte = pci_read_config8(sm_dev, 0xAD); +- byte |= 1 << 4; +- pci_write_config8(sm_dev, 0xAD, byte); ++ /* set ide as primary, if you want to boot from IDE, you'd better set it ++ * in $vendor/$mainboard/devicetree.cb */ ++ if (conf->boot_switch_sata_ide == 1) { ++ struct device *sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); ++ byte = pci_read_config8(sm_dev, 0xad); ++ byte |= 1 << 4; ++ pci_write_config8(sm_dev, 0xad, byte); ++ } + } + } + +diff --git a/src/southbridge/amd/sb700/sata.c b/src/southbridge/amd/sb700/sata.c +index 172ad36..d97288a 100644 +--- a/src/southbridge/amd/sb700/sata.c ++++ b/src/southbridge/amd/sb700/sata.c +@@ -2,6 +2,7 @@ + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. ++ * Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by +@@ -24,18 +25,19 @@ + #include <device/pci_ids.h> + #include <device/pci_ops.h> + #include <arch/io.h> ++#include <option.h> + #include "sb700.h" + +-static int sata_drive_detect(int portnum, u16 iobar) ++static int sata_drive_detect(int portnum, uint16_t iobar) + { + u8 byte, byte2; + int i = 0; +- outb(0xA0 + 0x10 * (portnum % 2), iobar + 0x6); ++ outb(0xa0 + 0x10 * (portnum % 2), iobar + 0x6); + while (byte = inb(iobar + 0x6), byte2 = inb(iobar + 0x7), +- (byte != (0xA0 + 0x10 * (portnum % 2))) || ++ (byte != (0xa0 + 0x10 * (portnum % 2))) || + ((byte2 & 0x88) != 0)) { + printk(BIOS_SPEW, "0x6=%x, 0x7=%x\n", byte, byte2); +- if (byte != (0xA0 + 0x10 * (portnum % 2))) { ++ if (byte != (0xa0 + 0x10 * (portnum % 2))) { + /* This will happen at the first iteration of this loop + * if the first SATA port is unpopulated and the + * second SATA port is populated. +@@ -65,15 +67,15 @@ void __attribute__((weak)) sb7xx_51xx_setup_sata_phys(struct device *dev) + pci_write_config32(dev, 0x90, 0x01B48016); + pci_write_config32(dev, 0x94, 0x01B48016); + pci_write_config32(dev, 0x98, 0x01B48016); +- pci_write_config32(dev, 0x9C, 0x01B48016); ++ pci_write_config32(dev, 0x9c, 0x01B48016); + + /* RPR7.6.3 SATA GEN II PHY port setting for port [0~5]. */ +- pci_write_config16(dev, 0xA0, 0xA09A); +- pci_write_config16(dev, 0xA2, 0xA09F); +- pci_write_config16(dev, 0xA4, 0xA07A); +- pci_write_config16(dev, 0xA6, 0xA07A); +- pci_write_config16(dev, 0xA8, 0xA07A); +- pci_write_config16(dev, 0xAA, 0xA07A); ++ pci_write_config16(dev, 0xa0, 0xA09A); ++ pci_write_config16(dev, 0xa2, 0xA09F); ++ pci_write_config16(dev, 0xa4, 0xA07A); ++ pci_write_config16(dev, 0xa6, 0xA07A); ++ pci_write_config16(dev, 0xa8, 0xA07A); ++ pci_write_config16(dev, 0xaa, 0xA07A); + } + + static void sata_init(struct device *dev) +@@ -83,8 +85,18 @@ static void sata_init(struct device *dev) + u32 dword; + u8 rev_id; + void *sata_bar5; +- u16 sata_bar0, sata_bar1, sata_bar2, sata_bar3, sata_bar4; ++ uint16_t sata_bar0, sata_bar1, sata_bar2, sata_bar3, sata_bar4; ++ uint16_t ide_bar0, ide_bar1, ide_bar2, ide_bar3; ++ uint16_t current_bar; + int i, j; ++ uint8_t nvram; ++ uint8_t sata_ahci_mode; ++ uint8_t port_count; ++ uint8_t max_port_count; ++ ++ sata_ahci_mode = 0; ++ if (get_option(&nvram, "sata_ahci_mode") == CB_SUCCESS) ++ sata_ahci_mode = !!nvram; + + device_t sm_dev; + /* SATA SMBus Disable */ +@@ -98,21 +110,39 @@ static void sata_init(struct device *dev) + byte |= (1 << 5); + pci_write_config8(sm_dev, 0xad, byte); + ++ /* get rev_id */ ++ rev_id = pci_read_config8(sm_dev, 0x08) - 0x28; ++ ++ if (sata_ahci_mode) { ++ /* Enable link latency enhancement on A14 and above */ ++ if (rev_id >= 0x14) { ++ byte = pci_read_config8(sm_dev, 0xad); ++ byte &= ~(1 << 5); ++ pci_write_config8(sm_dev, 0xad, byte); ++ } ++ } ++ ++ /* Disable combined mode */ ++ byte = pci_read_config8(sm_dev, 0xad); ++ byte &= ~(1 << 3); ++ pci_write_config8(sm_dev, 0xad, byte); ++ ++ device_t ide_dev; ++ /* IDE Device */ ++ ide_dev = dev_find_slot(0, PCI_DEVFN(0x14, 1)); ++ + /* RPR 7.2 SATA Initialization */ + /* Set the interrupt Mapping to INTG# */ + byte = pci_read_config8(sm_dev, 0xaf); + byte = 0x6 << 2; + pci_write_config8(sm_dev, 0xaf, byte); + +- /* get rev_id */ +- rev_id = pci_read_config8(sm_dev, 0x08) - 0x28; +- + /* get base address */ + sata_bar5 = (void *)(pci_read_config32(dev, 0x24) & ~0x3FF); + sata_bar0 = pci_read_config16(dev, 0x10) & ~0x7; + sata_bar1 = pci_read_config16(dev, 0x14) & ~0x3; + sata_bar2 = pci_read_config16(dev, 0x18) & ~0x7; +- sata_bar3 = pci_read_config16(dev, 0x1C) & ~0x3; ++ sata_bar3 = pci_read_config16(dev, 0x1c) & ~0x3; + sata_bar4 = pci_read_config16(dev, 0x20) & ~0xf; + + printk(BIOS_SPEW, "sata_bar0=%x\n", sata_bar0); /* 3030 */ +@@ -122,11 +152,16 @@ static void sata_init(struct device *dev) + printk(BIOS_SPEW, "sata_bar4=%x\n", sata_bar4); /* 3000 */ + printk(BIOS_SPEW, "sata_bar5=%p\n", sata_bar5); /* e0309000 */ + +- /* disable combined mode */ +- byte = pci_read_config8(sm_dev, 0xAD); +- byte &= ~(1 << 3); +- pci_write_config8(sm_dev, 0xAD, byte); +- /* Program the 2C to 0x43801002 */ ++ ide_bar0 = pci_read_config16(ide_dev, 0x10) & ~0x7; ++ ide_bar1 = pci_read_config16(ide_dev, 0x14) & ~0x3; ++ ide_bar2 = pci_read_config16(ide_dev, 0x18) & ~0x7; ++ ide_bar3 = pci_read_config16(ide_dev, 0x1c) & ~0x3; ++ printk(BIOS_SPEW, "ide_bar0=%x\n", ide_bar0); ++ printk(BIOS_SPEW, "ide_bar1=%x\n", ide_bar1); ++ printk(BIOS_SPEW, "ide_bar2=%x\n", ide_bar2); ++ printk(BIOS_SPEW, "ide_bar3=%x\n", ide_bar3); ++ ++ /* Program the Subsystem ID/VID to 0x43801002 */ + dword = 0x43801002; + pci_write_config32(dev, 0x2c, dword); + +@@ -140,15 +175,48 @@ static void sata_init(struct device *dev) + byte |= (1 << 2); + pci_write_config8(dev, 0x40, byte); + +- /* Set SATA Operation Mode, Set to IDE mode */ ++ /* Unlock subclass and certain BAR R/O registers */ + byte = pci_read_config8(dev, 0x40); + byte |= (1 << 0); +- byte |= (1 << 4); + pci_write_config8(dev, 0x40, byte); + +- dword = 0x01018f00; +- pci_write_config32(dev, 0x8, dword); ++ /* Disable AHCI enhancement (AMD SP5100 RPR page 54) */ ++ dword = pci_read_config32(dev, 0x40); ++ dword |= (1 << 23); ++ pci_write_config32(dev, 0x40, dword); ++ ++ if (sata_ahci_mode) { ++ /* Force number of ports to 6 ++ * NOTE: This is not documented in the register ++ * reference guide, but CIMX needs to do this ++ * to activate all 6 ports when IDE is disabled. ++ */ ++ dword = read32(sata_bar5 + 0x00); ++ dword &= ~0x7; ++ dword |= 0x5; ++ write32(sata_bar5 + 0x00, dword); ++ } else { ++ /* Set SATA Operation Mode, Set to IDE mode */ ++ byte = pci_read_config8(dev, 0x40); ++ byte |= (1 << 4); ++ pci_write_config8(dev, 0x40, byte); ++ ++ dword = 0x01018f00; ++ pci_write_config32(dev, 0x8, dword); ++ } ++ ++ /* Get maximum number of ports */ ++ max_port_count = read32(sata_bar5 + 0x00) & 0x1f; ++ max_port_count++; ++ printk(BIOS_SPEW, "Maximum SATA port count supported by silicon: %d\n", max_port_count); + ++ /* Set number of ports */ ++ dword = CONFIG_SOUTHBRIDGE_AMD_SB700_SATA_PORT_COUNT_BITFIELD; ++ for (i = max_port_count; i < 32; i++) ++ dword &= ~(0x1 << i); ++ write32(sata_bar5 + 0x0c, dword); ++ ++ /* Write protect Sub-Class Code */ + byte = pci_read_config8(dev, 0x40); + byte &= ~(1 << 0); + pci_write_config8(dev, 0x40, byte); +@@ -181,6 +249,7 @@ static void sata_init(struct device *dev) + byte = 0x10; + pci_write_config8(dev, 0x46, byte); + sb7xx_51xx_setup_sata_phys(dev); ++ + /* Enable the I/O, MM, BusMaster access for SATA */ + byte = pci_read_config8(dev, 0x4); + byte |= 7 << 0; +@@ -191,62 +260,75 @@ static void sata_init(struct device *dev) + pci_write_config32(dev, 0xC, 0x00004000); + #endif + +- /* RPR7.7 SATA drive detection. */ +- /* Use BAR5+0x128,BAR0 for Primary Slave */ +- /* Use BAR5+0x1A8,BAR0 for Primary Slave */ +- /* Use BAR5+0x228,BAR2 for Secondary Master */ +- /* Use BAR5+0x2A8,BAR2 for Secondary Slave */ +- /* Use BAR5+0x328,PATA_BAR0/2 for Primary/Secondary master emulation */ +- /* Use BAR5+0x3A8,PATA_BAR0/2 for Primary/Secondary Slave emulation */ +- +- /* TODO: port 4,5, which are PATA emulations. What are PATA_BARs? */ +- +- for (i = 0; i < 4; i++) { +- byte = read8(sata_bar5 + 0x128 + 0x80 * i); +- printk(BIOS_SPEW, "SATA port %i status = %x\n", i, byte); +- byte &= 0xF; +- if( byte == 0x1 ) { +- /* If the drive status is 0x1 then we see it but we aren't talking to it. */ +- /* Try to do something about it. */ +- printk(BIOS_SPEW, "SATA device detected but not talking. Trying lower speed.\n"); ++ /* Determine port count */ ++ port_count = 0; ++ for (i = 0; i < 32; i++) { ++ if (CONFIG_SOUTHBRIDGE_AMD_SB700_SATA_PORT_COUNT_BITFIELD & (0x1 << i)) ++ port_count = i; ++ } ++ port_count++; ++ if (port_count > max_port_count) ++ port_count = max_port_count; ++ ++ if (!sata_ahci_mode) { ++ /* RPR7.7 SATA drive detection. */ ++ /* Use BAR5+0x128,BAR0 for Primary Slave */ ++ /* Use BAR5+0x1A8,BAR0 for Primary Slave */ ++ /* Use BAR5+0x228,BAR2 for Secondary Master */ ++ /* Use BAR5+0x2A8,BAR2 for Secondary Slave */ ++ /* Use BAR5+0x328,PATA_BAR0/2 for Primary/Secondary Master emulation */ ++ /* Use BAR5+0x3A8,PATA_BAR0/2 for Primary/Secondary Slave emulation */ ++ for (i = 0; i < port_count; i++) { ++ byte = read8(sata_bar5 + 0x128 + 0x80 * i); ++ printk(BIOS_SPEW, "SATA port %i status = %x\n", i, byte); ++ byte &= 0xF; ++ if (byte == 0x1) { ++ /* If the drive status is 0x1 then we see it but we aren't talking to it. */ ++ /* Try to do something about it. */ ++ printk(BIOS_SPEW, "SATA device detected but not talking. Trying lower speed.\n"); + +- /* Read in Port-N Serial ATA Control Register */ +- byte = read8(sata_bar5 + 0x12C + 0x80 * i); ++ /* Read in Port-N Serial ATA Control Register */ ++ byte = read8(sata_bar5 + 0x12C + 0x80 * i); + +- /* Set Reset Bit and 1.5g bit */ +- byte |= 0x11; +- write8((sata_bar5 + 0x12C + 0x80 * i), byte); ++ /* Set Reset Bit and 1.5g bit */ ++ byte |= 0x11; ++ write8((sata_bar5 + 0x12C + 0x80 * i), byte); + +- /* Wait 1ms */ +- mdelay(1); ++ /* Wait 1ms */ ++ mdelay(1); + +- /* Clear Reset Bit */ +- byte &= ~0x01; +- write8((sata_bar5 + 0x12C + 0x80 * i), byte); ++ /* Clear Reset Bit */ ++ byte &= ~0x01; ++ write8((sata_bar5 + 0x12C + 0x80 * i), byte); + +- /* Wait 1ms */ +- mdelay(1); ++ /* Wait 1ms */ ++ mdelay(1); + +- /* Reread status */ +- byte = read8(sata_bar5 + 0x128 + 0x80 * i); +- printk(BIOS_SPEW, "SATA port %i status = %x\n", i, byte); +- byte &= 0xF; +- } ++ /* Reread status */ ++ byte = read8(sata_bar5 + 0x128 + 0x80 * i); ++ printk(BIOS_SPEW, "SATA port %i status = %x\n", i, byte); ++ byte &= 0xF; ++ } + +- if (byte == 0x3) { +- for (j = 0; j < 10; j++) { +- if (!sata_drive_detect(i, ((i / 2) == 0) ? sata_bar0 : sata_bar2)) +- break; ++ if (byte == 0x3) { ++ for (j = 0; j < 10; j++) { ++ if (i < 4) ++ current_bar = ((i / 2) == 0) ? sata_bar0 : sata_bar2; ++ else ++ current_bar = ide_bar0; ++ if (!sata_drive_detect(i, current_bar)) ++ break; ++ } ++ printk(BIOS_DEBUG, "%s %s device is %sready after %i tries\n", ++ (i / 2) ? "Secondary" : "Primary", ++ (i % 2 ) ? "Slave" : "Master", ++ (j == 10) ? "not " : "", ++ (j == 10) ? j : j + 1); ++ } else { ++ printk(BIOS_DEBUG, "No %s %s SATA drive on Slot%i\n", ++ (i / 2) ? "Secondary" : "Primary", ++ (i % 2 ) ? "Slave" : "Master", i); + } +- printk(BIOS_DEBUG, "%s %s device is %sready after %i tries\n", +- (i / 2) ? "Secondary" : "Primary", +- (i % 2 ) ? "Slave" : "Master", +- (j == 10) ? "not " : "", +- (j == 10) ? j : j + 1); +- } else { +- printk(BIOS_DEBUG, "No %s %s SATA drive on Slot%i\n", +- (i / 2) ? "Secondary" : "Primary", +- (i % 2 ) ? "Slave" : "Master", i); + } + } + +@@ -256,13 +338,15 @@ static void sata_init(struct device *dev) + byte |= 1 << 1; + write8((sata_bar5 + 0x4), byte); + +- /* Clear error status */ +- write32((sata_bar5 + 0x130), 0xFFFFFFFF); +- write32((sata_bar5 + 0x1b0), 0xFFFFFFFF); +- write32((sata_bar5 + 0x230), 0xFFFFFFFF); +- write32((sata_bar5 + 0x2b0), 0xFFFFFFFF); +- write32((sata_bar5 + 0x330), 0xFFFFFFFF); +- write32((sata_bar5 + 0x3b0), 0xFFFFFFFF); ++ if (!sata_ahci_mode) { ++ /* Clear error status */ ++ write32((sata_bar5 + 0x130), 0xFFFFFFFF); ++ write32((sata_bar5 + 0x1b0), 0xFFFFFFFF); ++ write32((sata_bar5 + 0x230), 0xFFFFFFFF); ++ write32((sata_bar5 + 0x2b0), 0xFFFFFFFF); ++ write32((sata_bar5 + 0x330), 0xFFFFFFFF); ++ write32((sata_bar5 + 0x3b0), 0xFFFFFFFF); ++ } + + /* Clear SATA status,Firstly we get the AcpiGpe0BlkAddr */ + /* ????? why CIM does not set the AcpiGpe0BlkAddr , but use it??? */ +@@ -293,3 +377,15 @@ static const struct pci_driver sata0_driver __pci_driver = { + .vendor = PCI_VENDOR_ID_ATI, + .device = PCI_DEVICE_ID_ATI_SB700_SATA, + }; ++ ++static const struct pci_driver sata1_driver __pci_driver = { ++ .ops = &sata_ops, ++ .vendor = PCI_VENDOR_ID_ATI, ++ .device = PCI_DEVICE_ID_ATI_SB700_SATA_AHCI, ++}; ++ ++static const struct pci_driver sata2_driver __pci_driver = { ++ .ops = &sata_ops, ++ .vendor = PCI_VENDOR_ID_ATI, ++ .device = PCI_DEVICE_ID_ATI_SB700_SATA_AHCI_AMD, ++}; +diff --git a/src/southbridge/amd/sb800/fadt.c b/src/southbridge/amd/sb800/fadt.c +index 5250e20..95e3354 100644 +--- a/src/southbridge/amd/sb800/fadt.c ++++ b/src/southbridge/amd/sb800/fadt.c +@@ -2,6 +2,7 @@ + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. ++ * Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by +-- +1.9.1 + |