diff options
Diffstat (limited to 'resources/libreboot')
12 files changed, 0 insertions, 1869 deletions
diff --git a/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/w500_16mb/0002-gm45-gma.c-use-screen-on-vga-connector-if-connected.patch b/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/w500_16mb/0002-gm45-gma.c-use-screen-on-vga-connector-if-connected.patch deleted file mode 100644 index 26632b7d..00000000 --- a/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/w500_16mb/0002-gm45-gma.c-use-screen-on-vga-connector-if-connected.patch +++ /dev/null @@ -1,212 +0,0 @@ -From 51dc727c71bbb10519a670b83b67a84f704e003a Mon Sep 17 00:00:00 2001 -From: Arthur Heymans <arthur@aheymans.xyz> -Date: Mon, 22 Aug 2016 17:58:46 +0200 -Subject: [PATCH 1/2] gm45/gma.c: use screen on vga connector if connected - -The intel x4x and gm45 have very similar integrated graphic devices. -Currently the x4x native graphic init enables VGA, while gm45 can output -on LVDS. - -This patch reuses the x4x graphic initialisation code -to enable output on VGA in gm45 in a way that the behavior is similar to vbios: -If no VGA display is connected the internal LVDS screen is used. -If an external screen is detected on the VGA port it will be used instead. - -Change-Id: I7e9ff793a5384ad8b4220fb1c0d9b28e6cee8391 -Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> ---- - src/northbridge/intel/gm45/gma.c | 157 ++++++++++++++++++++++++++++++++++++++- - 1 file changed, 153 insertions(+), 4 deletions(-) - -diff --git a/src/northbridge/intel/gm45/gma.c b/src/northbridge/intel/gm45/gma.c -index d5f6471..74c9bc3 100644 ---- a/src/northbridge/intel/gm45/gma.c -+++ b/src/northbridge/intel/gm45/gma.c -@@ -47,7 +47,7 @@ void gtt_write(u32 reg, u32 data) - write32(res2mmio(gtt_res, reg, 0), data); - } - --static void intel_gma_init(const struct northbridge_intel_gm45_config *info, -+static void gma_init_lvds(const struct northbridge_intel_gm45_config *info, - u8 *mmio, u32 physbase, u16 piobase, u32 lfb) - { - -@@ -101,7 +101,7 @@ static void intel_gma_init(const struct northbridge_intel_gm45_config *info, - sizeof(edid_data), &edid); - mode = &edid.mode; - -- /* Disable screen memory to prevent garbage from appearing. */ -+ /* Disable screen memory to prevent garbage from appearing. */ - vga_sr_write(1, vga_sr_read(1) | 0x20); - - hactive = edid.x_resolution; -@@ -344,6 +344,152 @@ static void intel_gma_init(const struct northbridge_intel_gm45_config *info, - } - } - -+static void gma_init_vga(const struct northbridge_intel_gm45_config *info, -+ u8 *mmio) -+{ -+ -+ int i; -+ u32 hactive, vactive; -+ -+ vga_gr_write(0x18, 0); -+ -+ write32(mmio + VGA0, 0x31108); -+ write32(mmio + VGA1, 0x31406); -+ -+ write32(mmio + ADPA, ADPA_DAC_ENABLE -+ | ADPA_PIPE_A_SELECT -+ | ADPA_CRT_HOTPLUG_MONITOR_COLOR -+ | ADPA_CRT_HOTPLUG_ENABLE -+ | ADPA_USE_VGA_HVPOLARITY -+ | ADPA_VSYNC_CNTL_ENABLE -+ | ADPA_HSYNC_CNTL_ENABLE -+ | ADPA_DPMS_ON -+ ); -+ -+ write32(mmio + 0x7041c, 0x0); -+ write32(mmio + DPLL_MD(0), 0x3); -+ write32(mmio + DPLL_MD(1), 0x3); -+ -+ vga_misc_write(0x67); -+ -+ const u8 cr[] = { 0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f, -+ 0x00, 0x4f, 0x0d, 0x0e, 0x00, 0x00, 0x00, 0x00, -+ 0x9c, 0x8e, 0x8f, 0x28, 0x1f, 0x96, 0xb9, 0xa3, -+ 0xff -+ }; -+ vga_cr_write(0x11, 0); -+ -+ for (i = 0; i <= 0x18; i++) -+ vga_cr_write(i, cr[i]); -+ -+ /* Disable screen memory to prevent garbage from appearing. */ -+ vga_sr_write(1, vga_sr_read(1) | 0x20); -+ -+ hactive = 640; -+ vactive = 400; -+ -+ mdelay(1); -+ write32(mmio + FP0(0), 0x31108); -+ write32(mmio + DPLL(0), -+ DPLL_VCO_ENABLE | DPLLB_MODE_DAC_SERIAL -+ | DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 -+ | 0x10601 -+ ); -+ mdelay(1); -+ write32(mmio + DPLL(0), -+ DPLL_VCO_ENABLE | DPLLB_MODE_DAC_SERIAL -+ | DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 -+ | 0x10601 -+ ); -+ -+ write32(mmio + ADPA, ADPA_DAC_ENABLE -+ | ADPA_PIPE_A_SELECT -+ | ADPA_CRT_HOTPLUG_MONITOR_COLOR -+ | ADPA_CRT_HOTPLUG_ENABLE -+ | ADPA_USE_VGA_HVPOLARITY -+ | ADPA_VSYNC_CNTL_ENABLE -+ | ADPA_HSYNC_CNTL_ENABLE -+ | ADPA_DPMS_ON -+ ); -+ -+ write32(mmio + HTOTAL(0), -+ ((hactive - 1) << 16) -+ | (hactive - 1)); -+ write32(mmio + HBLANK(0), -+ ((hactive - 1) << 16) -+ | (hactive - 1)); -+ write32(mmio + HSYNC(0), -+ ((hactive - 1) << 16) -+ | (hactive - 1)); -+ -+ write32(mmio + VTOTAL(0), ((vactive - 1) << 16) -+ | (vactive - 1)); -+ write32(mmio + VBLANK(0), ((vactive - 1) << 16) -+ | (vactive - 1)); -+ write32(mmio + VSYNC(0), -+ ((vactive - 1) << 16) -+ | (vactive - 1)); -+ -+ write32(mmio + PIPECONF(0), PIPECONF_DISABLE); -+ -+ write32(mmio + PF_WIN_POS(0), 0); -+ -+ write32(mmio + PIPESRC(0), (639 << 16) | 399); -+ write32(mmio + PF_CTL(0), PF_ENABLE | PF_FILTER_MED_3x3); -+ write32(mmio + PF_WIN_SZ(0), vactive | (hactive << 16)); -+ write32(mmio + PFIT_CONTROL, 0xa0000000); -+ -+ mdelay(1); -+ -+ write32(mmio + 0x000f000c, 0x00002040); -+ mdelay(1); -+ write32(mmio + 0x000f000c, 0x00002050); -+ write32(mmio + 0x00060100, 0x00044000); -+ mdelay(1); -+ write32(mmio + PIPECONF(0), PIPECONF_ENABLE -+ | PIPECONF_BPP_6 | PIPECONF_DITHER_EN); -+ -+ write32(mmio + VGACNTRL, 0x0); -+ write32(mmio + DSPCNTR(0), DISPLAY_PLANE_ENABLE | DISPPLANE_BGRX888); -+ mdelay(1); -+ -+ write32(mmio + ADPA, ADPA_DAC_ENABLE -+ | ADPA_PIPE_A_SELECT -+ | ADPA_CRT_HOTPLUG_MONITOR_COLOR -+ | ADPA_CRT_HOTPLUG_ENABLE -+ | ADPA_USE_VGA_HVPOLARITY -+ | ADPA_VSYNC_CNTL_ENABLE -+ | ADPA_HSYNC_CNTL_ENABLE -+ | ADPA_DPMS_ON -+ ); -+ -+ vga_textmode_init(); -+ -+ /* Enable screen memory. */ -+ vga_sr_write(1, vga_sr_read(1) & ~0x20); -+ -+ /* Clear interrupts. */ -+ write32(mmio + DEIIR, 0xffffffff); -+ write32(mmio + SDEIIR, 0xffffffff); -+} -+ -+/* compare the header of the vga edid header */ -+/* if vga is not connected it should not have a correct header */ -+static u8 vga_connected(u8 *mmio) -+{ -+ u8 vga_edid[128]; -+ u8 header[8] = {0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00}; -+ intel_gmbus_read_edid(mmio + GMBUS0, 2, 0x50, vga_edid, 128); -+ for (int i = 0; i < 8; i++) { -+ if (vga_edid[i] != header[i]) { -+ printk(BIOS_DEBUG, "VGA not connected. Using LVDS display\n"); -+ return 0; -+ } -+ } -+ printk(BIOS_SPEW, "VGA display connected\n"); -+ return 1; -+} -+ - static void gma_pm_init_post_vbios(struct device *const dev) - { - const struct northbridge_intel_gm45_config *const conf = dev->chip_info; -@@ -419,8 +565,11 @@ static void gma_func0_init(struct device *dev) - printk(BIOS_SPEW, - "Initializing VGA without OPROM. MMIO 0x%llx\n", - gtt_res->base); -- intel_gma_init(conf, res2mmio(gtt_res, 0, 0), physbase, -- pio_res->base, lfb_res->base); -+ if (vga_connected(res2mmio(gtt_res, 0, 0))) -+ gma_init_vga(conf, res2mmio(gtt_res, 0, 0)); -+ else -+ gma_init_lvds(conf, res2mmio(gtt_res, 0, 0), -+ physbase, pio_res->base, lfb_res->base); - } - - /* Linux relies on VBT for panel info. */ --- -2.9.3 - diff --git a/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/w500_16mb/0003-nb-gm45-gma.c-enable-VESA-framebuffer-mode-on-VGA-ou.patch b/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/w500_16mb/0003-nb-gm45-gma.c-enable-VESA-framebuffer-mode-on-VGA-ou.patch deleted file mode 100644 index ef42f3e8..00000000 --- a/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/w500_16mb/0003-nb-gm45-gma.c-enable-VESA-framebuffer-mode-on-VGA-ou.patch +++ /dev/null @@ -1,379 +0,0 @@ -From 44423cb3e0118b04739f89409e71a0ed1622ccd2 Mon Sep 17 00:00:00 2001 -From: Arthur Heymans <arthur@aheymans.xyz> -Date: Sat, 27 Aug 2016 01:09:19 +0200 -Subject: [PATCH 2/2] nb/gm45/gma.c: enable VESA framebuffer mode on VGA output - -This implements "Keep VESA framebuffer" behavior on VGA output of gm45. -This patch reuses Linux code to compute vga divisors. - -Change-Id: I2db5dd9bb1a7e309ca763b1559b89f7f5c8e6d3d -Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> ---- - src/northbridge/intel/gm45/gma.c | 251 ++++++++++++++++++++++++++++++++------- - 1 file changed, 209 insertions(+), 42 deletions(-) - -diff --git a/src/northbridge/intel/gm45/gma.c b/src/northbridge/intel/gm45/gma.c -index 74c9bc3..efaa210 100644 ---- a/src/northbridge/intel/gm45/gma.c -+++ b/src/northbridge/intel/gm45/gma.c -@@ -25,6 +25,7 @@ - #include <cpu/x86/msr.h> - #include <cpu/x86/mtrr.h> - #include <kconfig.h> -+#include <commonlib/helpers.h> - - #include "drivers/intel/gma/i915_reg.h" - #include "chip.h" -@@ -35,6 +36,8 @@ - #include <pc80/vga.h> - #include <pc80/vga_io.h> - -+#define BASE_FREQUECY 96000 -+ - static struct resource *gtt_res = NULL; - - u32 gtt_read(u32 reg) -@@ -345,14 +348,38 @@ static void gma_init_lvds(const struct northbridge_intel_gm45_config *info, - } - - static void gma_init_vga(const struct northbridge_intel_gm45_config *info, -- u8 *mmio) -+ u8 *mmio, u32 physbase, u16 piobase, u32 lfb) - { - - int i; -- u32 hactive, vactive; -+ u8 edid_data[128]; -+ struct edid edid; -+ struct edid_mode *mode; -+ u32 hactive, vactive, right_border, bottom_border; -+ int hpolarity, vpolarity; -+ u32 vsync, hsync, vblank, hblank, hfront_porch, vfront_porch; -+ u32 target_frequency; -+ u32 smallest_err = 0xffffffff; -+ u32 pixel_p1 = 1; -+ u32 pixel_n = 1; -+ u32 pixel_m1 = 1; -+ u32 pixel_m2 = 1; -+ u32 link_frequency = info->gfx.link_frequency_270_mhz ? 270000 : 162000; -+ u32 data_m1; -+ u32 data_n1 = 0x00800000; -+ u32 link_m1; -+ u32 link_n1 = 0x00040000; -+ - - vga_gr_write(0x18, 0); - -+ /* Setup GTT. */ -+ for (i = 0; i < 0x2000; i++) { -+ outl((i << 2) | 1, piobase); -+ outl(physbase + (i << 12) + 1, piobase + 4); -+ } -+ -+ - write32(mmio + VGA0, 0x31108); - write32(mmio + VGA1, 0x31406); - -@@ -363,8 +390,7 @@ static void gma_init_vga(const struct northbridge_intel_gm45_config *info, - | ADPA_USE_VGA_HVPOLARITY - | ADPA_VSYNC_CNTL_ENABLE - | ADPA_HSYNC_CNTL_ENABLE -- | ADPA_DPMS_ON -- ); -+ | ADPA_DPMS_ON); - - write32(mmio + 0x7041c, 0x0); - write32(mmio + DPLL_MD(0), 0x3); -@@ -382,95 +408,234 @@ static void gma_init_vga(const struct northbridge_intel_gm45_config *info, - for (i = 0; i <= 0x18; i++) - vga_cr_write(i, cr[i]); - -+ udelay(1); -+ -+ intel_gmbus_read_edid(mmio + GMBUS0, 2, 0x50, edid_data, 128); -+ intel_gmbus_stop(mmio + GMBUS0); -+ decode_edid(edid_data, -+ sizeof(edid_data), &edid); -+ mode = &edid.mode; -+ -+ - /* Disable screen memory to prevent garbage from appearing. */ - vga_sr_write(1, vga_sr_read(1) | 0x20); - -- hactive = 640; -- vactive = 400; -+ hactive = edid.x_resolution; -+ vactive = edid.y_resolution; -+ right_border = mode->hborder; -+ bottom_border = mode->vborder; -+ hpolarity = (mode->phsync == '-'); -+ vpolarity = (mode->pvsync == '-'); -+ vsync = mode->vspw; -+ hsync = mode->hspw; -+ vblank = mode->vbl; -+ hblank = mode->hbl; -+ hfront_porch = mode->hso; -+ vfront_porch = mode->vso; -+ target_frequency = mode->pixel_clock; -+ -+ if (IS_ENABLED(CONFIG_FRAMEBUFFER_KEEP_VESA_MODE)) { -+ vga_sr_write(1, 1); -+ vga_sr_write(0x2, 0xf); -+ vga_sr_write(0x3, 0x0); -+ vga_sr_write(0x4, 0xe); -+ vga_gr_write(0, 0x0); -+ vga_gr_write(1, 0x0); -+ vga_gr_write(2, 0x0); -+ vga_gr_write(3, 0x0); -+ vga_gr_write(4, 0x0); -+ vga_gr_write(5, 0x0); -+ vga_gr_write(6, 0x5); -+ vga_gr_write(7, 0xf); -+ vga_gr_write(0x10, 0x1); -+ vga_gr_write(0x11, 0); -+ -+ edid.bytes_per_line = (edid.bytes_per_line + 63) & ~63; -+ -+ write32(mmio + DSPCNTR(0), DISPLAY_PLANE_ENABLE -+ | DISPPLANE_BGRX888); -+ write32(mmio + DSPADDR(0), 0); -+ write32(mmio + DSPSTRIDE(0), edid.bytes_per_line); -+ write32(mmio + DSPSURF(0), 0); -+ for (i = 0; i < 0x100; i++) -+ write32(mmio + LGC_PALETTE(0) + 4 * i, i * 0x010101); -+ } else { -+ vga_textmode_init(); -+ } -+ -+ u32 candn, candm1, candm2, candp1; -+ for (candn = 1; candn <= 4; candn++) { -+ for (candm1 = 23; candm1 >= 17; candm1--) { -+ for (candm2 = 11; candm2 >= 5; candm2--) { -+ for (candp1 = 8; candp1 >= 1; candp1--) { -+ u32 m = 5 * (candm1 + 2) + (candm2 + 2); -+ u32 p = candp1 * 10; /* 10 == p2 */ -+ u32 vco = DIV_ROUND_CLOSEST(BASE_FREQUECY * m, candn + 2); -+ u32 dot = DIV_ROUND_CLOSEST(vco, p); -+ u32 this_err = ABS(dot - target_frequency); -+ if (this_err < smallest_err) { -+ smallest_err= this_err; -+ pixel_n = candn; -+ pixel_m1 = candm1; -+ pixel_m2 = candm2; -+ pixel_p1 = candp1; -+ } -+ } -+ } -+ } -+ } -+ -+ if (smallest_err == 0xffffffff) { -+ printk(BIOS_ERR, "Couldn't find GFX clock divisors\n"); -+ return; -+ } -+ -+ link_m1 = ((uint64_t)link_n1 * mode->pixel_clock) / link_frequency; -+ data_m1 = ((uint64_t)data_n1 * 18 * mode->pixel_clock) -+ / (link_frequency * 8 * 4); -+ -+ printk(BIOS_INFO, "bringing up panel at resolution %d x %d\n", -+ hactive, vactive); -+ printk(BIOS_DEBUG, "Borders %d x %d\n", -+ right_border, bottom_border); -+ printk(BIOS_DEBUG, "Blank %d x %d\n", -+ hblank, vblank); -+ printk(BIOS_DEBUG, "Sync %d x %d\n", -+ hsync, vsync); -+ printk(BIOS_DEBUG, "Front porch %d x %d\n", -+ hfront_porch, vfront_porch); -+ printk(BIOS_DEBUG, (info->gfx.use_spread_spectrum_clock -+ ? "Spread spectrum clock\n" : "DREF clock\n")); -+ printk(BIOS_DEBUG, "Polarities %d, %d\n", -+ hpolarity, vpolarity); -+ printk(BIOS_DEBUG, "Data M1=%d, N1=%d\n", -+ data_m1, data_n1); -+ printk(BIOS_DEBUG, "Link frequency %d kHz\n", -+ link_frequency); -+ printk(BIOS_DEBUG, "Link M1=%d, N1=%d\n", -+ link_m1, link_n1); -+ printk(BIOS_DEBUG, "Pixel N=%d, M1=%d, M2=%d, P1=%d\n", -+ pixel_n, pixel_m1, pixel_m2, pixel_p1); -+ printk(BIOS_DEBUG, "Pixel clock %d kHz\n", -+ BASE_FREQUECY * (5 * (pixel_m1 + 2) + (pixel_m2 + 2) / (pixel_n + 2) -+ / (pixel_p1 * 10))); - - mdelay(1); -- write32(mmio + FP0(0), 0x31108); -- write32(mmio + DPLL(0), -- DPLL_VCO_ENABLE | DPLLB_MODE_DAC_SERIAL -- | DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 -- | 0x10601 -- ); -+ write32(mmio + FP0(0), (pixel_n << 16) -+ | (pixel_m1 << 8) | pixel_m2); -+ write32(mmio + DPLL(0), DPLL_VCO_ENABLE -+ | DPLL_VGA_MODE_DIS | DPLLB_MODE_DAC_SERIAL -+ | (0x10000 << (pixel_p1 - 1)) -+ | (6 << 9)); -+ - mdelay(1); -- write32(mmio + DPLL(0), -- DPLL_VCO_ENABLE | DPLLB_MODE_DAC_SERIAL -- | DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 -- | 0x10601 -- ); -+ write32(mmio + DPLL(0), DPLL_VCO_ENABLE -+ | DPLL_VGA_MODE_DIS | DPLLB_MODE_DAC_SERIAL -+ | (0x10000 << (pixel_p1 - 1)) -+ | (6 << 9)); - - write32(mmio + ADPA, ADPA_DAC_ENABLE - | ADPA_PIPE_A_SELECT - | ADPA_CRT_HOTPLUG_MONITOR_COLOR - | ADPA_CRT_HOTPLUG_ENABLE -- | ADPA_USE_VGA_HVPOLARITY - | ADPA_VSYNC_CNTL_ENABLE - | ADPA_HSYNC_CNTL_ENABLE - | ADPA_DPMS_ON -- ); -+ | (vpolarity ? ADPA_VSYNC_ACTIVE_LOW : -+ ADPA_VSYNC_ACTIVE_HIGH) -+ | (hpolarity ? ADPA_HSYNC_ACTIVE_LOW : -+ ADPA_HSYNC_ACTIVE_HIGH)); - - write32(mmio + HTOTAL(0), -- ((hactive - 1) << 16) -+ ((hactive + right_border + hblank - 1) << 16) - | (hactive - 1)); - write32(mmio + HBLANK(0), -- ((hactive - 1) << 16) -- | (hactive - 1)); -+ ((hactive + right_border + hblank - 1) << 16) -+ | (hactive + right_border - 1)); - write32(mmio + HSYNC(0), -- ((hactive - 1) << 16) -- | (hactive - 1)); -+ ((hactive + right_border + hfront_porch + hsync - 1) << 16) -+ | (hactive + right_border + hfront_porch - 1)); - -- write32(mmio + VTOTAL(0), ((vactive - 1) << 16) -- | (vactive - 1)); -- write32(mmio + VBLANK(0), ((vactive - 1) << 16) -+ write32(mmio + VTOTAL(0), ((vactive + bottom_border + vblank - 1) << 16) - | (vactive - 1)); -+ write32(mmio + VBLANK(0), ((vactive + bottom_border + vblank - 1) << 16) -+ | (vactive + bottom_border - 1)); - write32(mmio + VSYNC(0), -- ((vactive - 1) << 16) -- | (vactive - 1)); -+ ((vactive + bottom_border + vfront_porch + vsync - 1) << 16) -+ | (vactive + bottom_border + vfront_porch - 1)); - - write32(mmio + PIPECONF(0), PIPECONF_DISABLE); - - write32(mmio + PF_WIN_POS(0), 0); -- -- write32(mmio + PIPESRC(0), (639 << 16) | 399); -- write32(mmio + PF_CTL(0), PF_ENABLE | PF_FILTER_MED_3x3); -- write32(mmio + PF_WIN_SZ(0), vactive | (hactive << 16)); -- write32(mmio + PFIT_CONTROL, 0xa0000000); -+ if (IS_ENABLED(CONFIG_FRAMEBUFFER_KEEP_VESA_MODE)) { -+ write32(mmio + PIPESRC(0), ((hactive - 1) << 16) -+ | (vactive - 1)); -+ write32(mmio + PF_CTL(0), 0); -+ write32(mmio + PF_WIN_SZ(0), 0); -+ write32(mmio + PFIT_CONTROL, 0); -+ } else { -+ write32(mmio + PIPESRC(0), (639 << 16) | 399); -+ write32(mmio + PF_CTL(0), PF_ENABLE | PF_FILTER_MED_3x3); -+ write32(mmio + PF_WIN_SZ(0), vactive | (hactive << 16)); -+ write32(mmio + PFIT_CONTROL, 0x80000000); -+ } - - mdelay(1); - -+ write32(mmio + PIPE_DATA_M1(0), 0x7e000000 | data_m1); -+ write32(mmio + PIPE_DATA_N1(0), data_n1); -+ write32(mmio + PIPE_LINK_M1(0), link_m1); -+ write32(mmio + PIPE_LINK_N1(0), link_n1); -+ - write32(mmio + 0x000f000c, 0x00002040); - mdelay(1); - write32(mmio + 0x000f000c, 0x00002050); - write32(mmio + 0x00060100, 0x00044000); - mdelay(1); -+ write32(mmio + PIPECONF(0), PIPECONF_BPP_6); -+ write32(mmio + 0x000f0008, 0x00000040); -+ write32(mmio + 0x000f000c, 0x00022050); -+ write32(mmio + PIPECONF(0), PIPECONF_BPP_6 | PIPECONF_DITHER_EN); - write32(mmio + PIPECONF(0), PIPECONF_ENABLE - | PIPECONF_BPP_6 | PIPECONF_DITHER_EN); - -- write32(mmio + VGACNTRL, 0x0); -- write32(mmio + DSPCNTR(0), DISPLAY_PLANE_ENABLE | DISPPLANE_BGRX888); -- mdelay(1); -+ if (IS_ENABLED(CONFIG_FRAMEBUFFER_KEEP_VESA_MODE)) { -+ write32(mmio + VGACNTRL, VGA_DISP_DISABLE); -+ write32(mmio + DSPCNTR(0), DISPLAY_PLANE_ENABLE -+ | DISPPLANE_BGRX888); -+ mdelay(1); -+ } else { -+ write32(mmio + VGACNTRL, 0xc4008e); -+ } - - write32(mmio + ADPA, ADPA_DAC_ENABLE - | ADPA_PIPE_A_SELECT - | ADPA_CRT_HOTPLUG_MONITOR_COLOR - | ADPA_CRT_HOTPLUG_ENABLE -- | ADPA_USE_VGA_HVPOLARITY - | ADPA_VSYNC_CNTL_ENABLE - | ADPA_HSYNC_CNTL_ENABLE - | ADPA_DPMS_ON -- ); -+ | (vpolarity ? ADPA_VSYNC_ACTIVE_LOW : -+ ADPA_VSYNC_ACTIVE_HIGH) -+ | (hpolarity ? ADPA_HSYNC_ACTIVE_LOW : -+ ADPA_HSYNC_ACTIVE_HIGH)); - -- vga_textmode_init(); -+ write32(mmio + PP_CONTROL, PANEL_POWER_ON | PANEL_POWER_RESET); - -- /* Enable screen memory. */ -+ /* Enable screen memory. */ - vga_sr_write(1, vga_sr_read(1) & ~0x20); - - /* Clear interrupts. */ - write32(mmio + DEIIR, 0xffffffff); - write32(mmio + SDEIIR, 0xffffffff); -+ -+ if (IS_ENABLED(CONFIG_FRAMEBUFFER_KEEP_VESA_MODE)) { -+ memset((void *) lfb, 0, -+ edid.x_resolution * edid.y_resolution * 4); -+ set_vbe_mode_info_valid(&edid, lfb); -+ } -+ -+ - } - - /* compare the header of the vga edid header */ -@@ -480,6 +645,7 @@ static u8 vga_connected(u8 *mmio) - u8 vga_edid[128]; - u8 header[8] = {0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00}; - intel_gmbus_read_edid(mmio + GMBUS0, 2, 0x50, vga_edid, 128); -+ intel_gmbus_stop(mmio + GMBUS0); - for (int i = 0; i < 8; i++) { - if (vga_edid[i] != header[i]) { - printk(BIOS_DEBUG, "VGA not connected. Using LVDS display\n"); -@@ -566,7 +732,8 @@ static void gma_func0_init(struct device *dev) - "Initializing VGA without OPROM. MMIO 0x%llx\n", - gtt_res->base); - if (vga_connected(res2mmio(gtt_res, 0, 0))) -- gma_init_vga(conf, res2mmio(gtt_res, 0, 0)); -+ gma_init_vga(conf, res2mmio(gtt_res, 0, 0), -+ physbase, pio_res->base, lfb_res->base); - else - gma_init_lvds(conf, res2mmio(gtt_res, 0, 0), - physbase, pio_res->base, lfb_res->base); --- -2.9.3 - diff --git a/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/w500_16mb/0004-gm45-gma.c-use-correct-id-string-for-fake-VBT.patch b/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/w500_16mb/0004-gm45-gma.c-use-correct-id-string-for-fake-VBT.patch deleted file mode 100644 index fb30c4c2..00000000 --- a/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/w500_16mb/0004-gm45-gma.c-use-correct-id-string-for-fake-VBT.patch +++ /dev/null @@ -1,31 +0,0 @@ -From d7fe366539f2a492b4a64030618506690bfbb232 Mon Sep 17 00:00:00 2001 -From: Arthur Heymans <arthur@aheymans.xyz> -Date: Thu, 8 Sep 2016 22:21:54 +0200 -Subject: [PATCH] gm45/gma.c: use correct id string for fake VBT - -The correct id string for gm45 is "$VBT CANTIGA ". -This can be found in the gm45 option rom: -"strings vbios.bin | grep VBT". - -Change-Id: Icd67a87dac774b4b3c211511c784c4fb4e2ea97c -Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> ---- - src/northbridge/intel/gm45/gma.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/src/northbridge/intel/gm45/gma.c b/src/northbridge/intel/gm45/gma.c -index d5f6471..19bd944 100644 ---- a/src/northbridge/intel/gm45/gma.c -+++ b/src/northbridge/intel/gm45/gma.c -@@ -425,7 +425,7 @@ static void gma_func0_init(struct device *dev) - - /* Linux relies on VBT for panel info. */ - generate_fake_intel_oprom(&conf->gfx, dev, -- "$VBT IRONLAKE-MOBILE"); -+ "$VBT CANTIGA "); - } - } - --- -2.9.3 - diff --git a/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/w500_16mb/reused.list b/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/w500_16mb/reused.list index 59e0a36a..30301d55 100644 --- a/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/w500_16mb/reused.list +++ b/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/w500_16mb/reused.list @@ -4,4 +4,3 @@ /resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/t400_8mb/0002-make-256M-vram-the-default-for-gm45-laptops.patch /resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/t400_8mb/0003-hardcode-use-on-intel-integrated-graphic-device-on-t.patch /resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/x200_8mb/0001-gm45-gma.c-clean-up-some-registers.patch -/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/x200_8mb/0001-nb-intel-gm45-Fix-IOMMU.patch diff --git a/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/w500_4mb/0002-gm45-gma.c-use-screen-on-vga-connector-if-connected.patch b/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/w500_4mb/0002-gm45-gma.c-use-screen-on-vga-connector-if-connected.patch deleted file mode 100644 index 26632b7d..00000000 --- a/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/w500_4mb/0002-gm45-gma.c-use-screen-on-vga-connector-if-connected.patch +++ /dev/null @@ -1,212 +0,0 @@ -From 51dc727c71bbb10519a670b83b67a84f704e003a Mon Sep 17 00:00:00 2001 -From: Arthur Heymans <arthur@aheymans.xyz> -Date: Mon, 22 Aug 2016 17:58:46 +0200 -Subject: [PATCH 1/2] gm45/gma.c: use screen on vga connector if connected - -The intel x4x and gm45 have very similar integrated graphic devices. -Currently the x4x native graphic init enables VGA, while gm45 can output -on LVDS. - -This patch reuses the x4x graphic initialisation code -to enable output on VGA in gm45 in a way that the behavior is similar to vbios: -If no VGA display is connected the internal LVDS screen is used. -If an external screen is detected on the VGA port it will be used instead. - -Change-Id: I7e9ff793a5384ad8b4220fb1c0d9b28e6cee8391 -Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> ---- - src/northbridge/intel/gm45/gma.c | 157 ++++++++++++++++++++++++++++++++++++++- - 1 file changed, 153 insertions(+), 4 deletions(-) - -diff --git a/src/northbridge/intel/gm45/gma.c b/src/northbridge/intel/gm45/gma.c -index d5f6471..74c9bc3 100644 ---- a/src/northbridge/intel/gm45/gma.c -+++ b/src/northbridge/intel/gm45/gma.c -@@ -47,7 +47,7 @@ void gtt_write(u32 reg, u32 data) - write32(res2mmio(gtt_res, reg, 0), data); - } - --static void intel_gma_init(const struct northbridge_intel_gm45_config *info, -+static void gma_init_lvds(const struct northbridge_intel_gm45_config *info, - u8 *mmio, u32 physbase, u16 piobase, u32 lfb) - { - -@@ -101,7 +101,7 @@ static void intel_gma_init(const struct northbridge_intel_gm45_config *info, - sizeof(edid_data), &edid); - mode = &edid.mode; - -- /* Disable screen memory to prevent garbage from appearing. */ -+ /* Disable screen memory to prevent garbage from appearing. */ - vga_sr_write(1, vga_sr_read(1) | 0x20); - - hactive = edid.x_resolution; -@@ -344,6 +344,152 @@ static void intel_gma_init(const struct northbridge_intel_gm45_config *info, - } - } - -+static void gma_init_vga(const struct northbridge_intel_gm45_config *info, -+ u8 *mmio) -+{ -+ -+ int i; -+ u32 hactive, vactive; -+ -+ vga_gr_write(0x18, 0); -+ -+ write32(mmio + VGA0, 0x31108); -+ write32(mmio + VGA1, 0x31406); -+ -+ write32(mmio + ADPA, ADPA_DAC_ENABLE -+ | ADPA_PIPE_A_SELECT -+ | ADPA_CRT_HOTPLUG_MONITOR_COLOR -+ | ADPA_CRT_HOTPLUG_ENABLE -+ | ADPA_USE_VGA_HVPOLARITY -+ | ADPA_VSYNC_CNTL_ENABLE -+ | ADPA_HSYNC_CNTL_ENABLE -+ | ADPA_DPMS_ON -+ ); -+ -+ write32(mmio + 0x7041c, 0x0); -+ write32(mmio + DPLL_MD(0), 0x3); -+ write32(mmio + DPLL_MD(1), 0x3); -+ -+ vga_misc_write(0x67); -+ -+ const u8 cr[] = { 0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f, -+ 0x00, 0x4f, 0x0d, 0x0e, 0x00, 0x00, 0x00, 0x00, -+ 0x9c, 0x8e, 0x8f, 0x28, 0x1f, 0x96, 0xb9, 0xa3, -+ 0xff -+ }; -+ vga_cr_write(0x11, 0); -+ -+ for (i = 0; i <= 0x18; i++) -+ vga_cr_write(i, cr[i]); -+ -+ /* Disable screen memory to prevent garbage from appearing. */ -+ vga_sr_write(1, vga_sr_read(1) | 0x20); -+ -+ hactive = 640; -+ vactive = 400; -+ -+ mdelay(1); -+ write32(mmio + FP0(0), 0x31108); -+ write32(mmio + DPLL(0), -+ DPLL_VCO_ENABLE | DPLLB_MODE_DAC_SERIAL -+ | DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 -+ | 0x10601 -+ ); -+ mdelay(1); -+ write32(mmio + DPLL(0), -+ DPLL_VCO_ENABLE | DPLLB_MODE_DAC_SERIAL -+ | DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 -+ | 0x10601 -+ ); -+ -+ write32(mmio + ADPA, ADPA_DAC_ENABLE -+ | ADPA_PIPE_A_SELECT -+ | ADPA_CRT_HOTPLUG_MONITOR_COLOR -+ | ADPA_CRT_HOTPLUG_ENABLE -+ | ADPA_USE_VGA_HVPOLARITY -+ | ADPA_VSYNC_CNTL_ENABLE -+ | ADPA_HSYNC_CNTL_ENABLE -+ | ADPA_DPMS_ON -+ ); -+ -+ write32(mmio + HTOTAL(0), -+ ((hactive - 1) << 16) -+ | (hactive - 1)); -+ write32(mmio + HBLANK(0), -+ ((hactive - 1) << 16) -+ | (hactive - 1)); -+ write32(mmio + HSYNC(0), -+ ((hactive - 1) << 16) -+ | (hactive - 1)); -+ -+ write32(mmio + VTOTAL(0), ((vactive - 1) << 16) -+ | (vactive - 1)); -+ write32(mmio + VBLANK(0), ((vactive - 1) << 16) -+ | (vactive - 1)); -+ write32(mmio + VSYNC(0), -+ ((vactive - 1) << 16) -+ | (vactive - 1)); -+ -+ write32(mmio + PIPECONF(0), PIPECONF_DISABLE); -+ -+ write32(mmio + PF_WIN_POS(0), 0); -+ -+ write32(mmio + PIPESRC(0), (639 << 16) | 399); -+ write32(mmio + PF_CTL(0), PF_ENABLE | PF_FILTER_MED_3x3); -+ write32(mmio + PF_WIN_SZ(0), vactive | (hactive << 16)); -+ write32(mmio + PFIT_CONTROL, 0xa0000000); -+ -+ mdelay(1); -+ -+ write32(mmio + 0x000f000c, 0x00002040); -+ mdelay(1); -+ write32(mmio + 0x000f000c, 0x00002050); -+ write32(mmio + 0x00060100, 0x00044000); -+ mdelay(1); -+ write32(mmio + PIPECONF(0), PIPECONF_ENABLE -+ | PIPECONF_BPP_6 | PIPECONF_DITHER_EN); -+ -+ write32(mmio + VGACNTRL, 0x0); -+ write32(mmio + DSPCNTR(0), DISPLAY_PLANE_ENABLE | DISPPLANE_BGRX888); -+ mdelay(1); -+ -+ write32(mmio + ADPA, ADPA_DAC_ENABLE -+ | ADPA_PIPE_A_SELECT -+ | ADPA_CRT_HOTPLUG_MONITOR_COLOR -+ | ADPA_CRT_HOTPLUG_ENABLE -+ | ADPA_USE_VGA_HVPOLARITY -+ | ADPA_VSYNC_CNTL_ENABLE -+ | ADPA_HSYNC_CNTL_ENABLE -+ | ADPA_DPMS_ON -+ ); -+ -+ vga_textmode_init(); -+ -+ /* Enable screen memory. */ -+ vga_sr_write(1, vga_sr_read(1) & ~0x20); -+ -+ /* Clear interrupts. */ -+ write32(mmio + DEIIR, 0xffffffff); -+ write32(mmio + SDEIIR, 0xffffffff); -+} -+ -+/* compare the header of the vga edid header */ -+/* if vga is not connected it should not have a correct header */ -+static u8 vga_connected(u8 *mmio) -+{ -+ u8 vga_edid[128]; -+ u8 header[8] = {0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00}; -+ intel_gmbus_read_edid(mmio + GMBUS0, 2, 0x50, vga_edid, 128); -+ for (int i = 0; i < 8; i++) { -+ if (vga_edid[i] != header[i]) { -+ printk(BIOS_DEBUG, "VGA not connected. Using LVDS display\n"); -+ return 0; -+ } -+ } -+ printk(BIOS_SPEW, "VGA display connected\n"); -+ return 1; -+} -+ - static void gma_pm_init_post_vbios(struct device *const dev) - { - const struct northbridge_intel_gm45_config *const conf = dev->chip_info; -@@ -419,8 +565,11 @@ static void gma_func0_init(struct device *dev) - printk(BIOS_SPEW, - "Initializing VGA without OPROM. MMIO 0x%llx\n", - gtt_res->base); -- intel_gma_init(conf, res2mmio(gtt_res, 0, 0), physbase, -- pio_res->base, lfb_res->base); -+ if (vga_connected(res2mmio(gtt_res, 0, 0))) -+ gma_init_vga(conf, res2mmio(gtt_res, 0, 0)); -+ else -+ gma_init_lvds(conf, res2mmio(gtt_res, 0, 0), -+ physbase, pio_res->base, lfb_res->base); - } - - /* Linux relies on VBT for panel info. */ --- -2.9.3 - diff --git a/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/w500_4mb/0003-nb-gm45-gma.c-enable-VESA-framebuffer-mode-on-VGA-ou.patch b/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/w500_4mb/0003-nb-gm45-gma.c-enable-VESA-framebuffer-mode-on-VGA-ou.patch deleted file mode 100644 index ef42f3e8..00000000 --- a/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/w500_4mb/0003-nb-gm45-gma.c-enable-VESA-framebuffer-mode-on-VGA-ou.patch +++ /dev/null @@ -1,379 +0,0 @@ -From 44423cb3e0118b04739f89409e71a0ed1622ccd2 Mon Sep 17 00:00:00 2001 -From: Arthur Heymans <arthur@aheymans.xyz> -Date: Sat, 27 Aug 2016 01:09:19 +0200 -Subject: [PATCH 2/2] nb/gm45/gma.c: enable VESA framebuffer mode on VGA output - -This implements "Keep VESA framebuffer" behavior on VGA output of gm45. -This patch reuses Linux code to compute vga divisors. - -Change-Id: I2db5dd9bb1a7e309ca763b1559b89f7f5c8e6d3d -Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> ---- - src/northbridge/intel/gm45/gma.c | 251 ++++++++++++++++++++++++++++++++------- - 1 file changed, 209 insertions(+), 42 deletions(-) - -diff --git a/src/northbridge/intel/gm45/gma.c b/src/northbridge/intel/gm45/gma.c -index 74c9bc3..efaa210 100644 ---- a/src/northbridge/intel/gm45/gma.c -+++ b/src/northbridge/intel/gm45/gma.c -@@ -25,6 +25,7 @@ - #include <cpu/x86/msr.h> - #include <cpu/x86/mtrr.h> - #include <kconfig.h> -+#include <commonlib/helpers.h> - - #include "drivers/intel/gma/i915_reg.h" - #include "chip.h" -@@ -35,6 +36,8 @@ - #include <pc80/vga.h> - #include <pc80/vga_io.h> - -+#define BASE_FREQUECY 96000 -+ - static struct resource *gtt_res = NULL; - - u32 gtt_read(u32 reg) -@@ -345,14 +348,38 @@ static void gma_init_lvds(const struct northbridge_intel_gm45_config *info, - } - - static void gma_init_vga(const struct northbridge_intel_gm45_config *info, -- u8 *mmio) -+ u8 *mmio, u32 physbase, u16 piobase, u32 lfb) - { - - int i; -- u32 hactive, vactive; -+ u8 edid_data[128]; -+ struct edid edid; -+ struct edid_mode *mode; -+ u32 hactive, vactive, right_border, bottom_border; -+ int hpolarity, vpolarity; -+ u32 vsync, hsync, vblank, hblank, hfront_porch, vfront_porch; -+ u32 target_frequency; -+ u32 smallest_err = 0xffffffff; -+ u32 pixel_p1 = 1; -+ u32 pixel_n = 1; -+ u32 pixel_m1 = 1; -+ u32 pixel_m2 = 1; -+ u32 link_frequency = info->gfx.link_frequency_270_mhz ? 270000 : 162000; -+ u32 data_m1; -+ u32 data_n1 = 0x00800000; -+ u32 link_m1; -+ u32 link_n1 = 0x00040000; -+ - - vga_gr_write(0x18, 0); - -+ /* Setup GTT. */ -+ for (i = 0; i < 0x2000; i++) { -+ outl((i << 2) | 1, piobase); -+ outl(physbase + (i << 12) + 1, piobase + 4); -+ } -+ -+ - write32(mmio + VGA0, 0x31108); - write32(mmio + VGA1, 0x31406); - -@@ -363,8 +390,7 @@ static void gma_init_vga(const struct northbridge_intel_gm45_config *info, - | ADPA_USE_VGA_HVPOLARITY - | ADPA_VSYNC_CNTL_ENABLE - | ADPA_HSYNC_CNTL_ENABLE -- | ADPA_DPMS_ON -- ); -+ | ADPA_DPMS_ON); - - write32(mmio + 0x7041c, 0x0); - write32(mmio + DPLL_MD(0), 0x3); -@@ -382,95 +408,234 @@ static void gma_init_vga(const struct northbridge_intel_gm45_config *info, - for (i = 0; i <= 0x18; i++) - vga_cr_write(i, cr[i]); - -+ udelay(1); -+ -+ intel_gmbus_read_edid(mmio + GMBUS0, 2, 0x50, edid_data, 128); -+ intel_gmbus_stop(mmio + GMBUS0); -+ decode_edid(edid_data, -+ sizeof(edid_data), &edid); -+ mode = &edid.mode; -+ -+ - /* Disable screen memory to prevent garbage from appearing. */ - vga_sr_write(1, vga_sr_read(1) | 0x20); - -- hactive = 640; -- vactive = 400; -+ hactive = edid.x_resolution; -+ vactive = edid.y_resolution; -+ right_border = mode->hborder; -+ bottom_border = mode->vborder; -+ hpolarity = (mode->phsync == '-'); -+ vpolarity = (mode->pvsync == '-'); -+ vsync = mode->vspw; -+ hsync = mode->hspw; -+ vblank = mode->vbl; -+ hblank = mode->hbl; -+ hfront_porch = mode->hso; -+ vfront_porch = mode->vso; -+ target_frequency = mode->pixel_clock; -+ -+ if (IS_ENABLED(CONFIG_FRAMEBUFFER_KEEP_VESA_MODE)) { -+ vga_sr_write(1, 1); -+ vga_sr_write(0x2, 0xf); -+ vga_sr_write(0x3, 0x0); -+ vga_sr_write(0x4, 0xe); -+ vga_gr_write(0, 0x0); -+ vga_gr_write(1, 0x0); -+ vga_gr_write(2, 0x0); -+ vga_gr_write(3, 0x0); -+ vga_gr_write(4, 0x0); -+ vga_gr_write(5, 0x0); -+ vga_gr_write(6, 0x5); -+ vga_gr_write(7, 0xf); -+ vga_gr_write(0x10, 0x1); -+ vga_gr_write(0x11, 0); -+ -+ edid.bytes_per_line = (edid.bytes_per_line + 63) & ~63; -+ -+ write32(mmio + DSPCNTR(0), DISPLAY_PLANE_ENABLE -+ | DISPPLANE_BGRX888); -+ write32(mmio + DSPADDR(0), 0); -+ write32(mmio + DSPSTRIDE(0), edid.bytes_per_line); -+ write32(mmio + DSPSURF(0), 0); -+ for (i = 0; i < 0x100; i++) -+ write32(mmio + LGC_PALETTE(0) + 4 * i, i * 0x010101); -+ } else { -+ vga_textmode_init(); -+ } -+ -+ u32 candn, candm1, candm2, candp1; -+ for (candn = 1; candn <= 4; candn++) { -+ for (candm1 = 23; candm1 >= 17; candm1--) { -+ for (candm2 = 11; candm2 >= 5; candm2--) { -+ for (candp1 = 8; candp1 >= 1; candp1--) { -+ u32 m = 5 * (candm1 + 2) + (candm2 + 2); -+ u32 p = candp1 * 10; /* 10 == p2 */ -+ u32 vco = DIV_ROUND_CLOSEST(BASE_FREQUECY * m, candn + 2); -+ u32 dot = DIV_ROUND_CLOSEST(vco, p); -+ u32 this_err = ABS(dot - target_frequency); -+ if (this_err < smallest_err) { -+ smallest_err= this_err; -+ pixel_n = candn; -+ pixel_m1 = candm1; -+ pixel_m2 = candm2; -+ pixel_p1 = candp1; -+ } -+ } -+ } -+ } -+ } -+ -+ if (smallest_err == 0xffffffff) { -+ printk(BIOS_ERR, "Couldn't find GFX clock divisors\n"); -+ return; -+ } -+ -+ link_m1 = ((uint64_t)link_n1 * mode->pixel_clock) / link_frequency; -+ data_m1 = ((uint64_t)data_n1 * 18 * mode->pixel_clock) -+ / (link_frequency * 8 * 4); -+ -+ printk(BIOS_INFO, "bringing up panel at resolution %d x %d\n", -+ hactive, vactive); -+ printk(BIOS_DEBUG, "Borders %d x %d\n", -+ right_border, bottom_border); -+ printk(BIOS_DEBUG, "Blank %d x %d\n", -+ hblank, vblank); -+ printk(BIOS_DEBUG, "Sync %d x %d\n", -+ hsync, vsync); -+ printk(BIOS_DEBUG, "Front porch %d x %d\n", -+ hfront_porch, vfront_porch); -+ printk(BIOS_DEBUG, (info->gfx.use_spread_spectrum_clock -+ ? "Spread spectrum clock\n" : "DREF clock\n")); -+ printk(BIOS_DEBUG, "Polarities %d, %d\n", -+ hpolarity, vpolarity); -+ printk(BIOS_DEBUG, "Data M1=%d, N1=%d\n", -+ data_m1, data_n1); -+ printk(BIOS_DEBUG, "Link frequency %d kHz\n", -+ link_frequency); -+ printk(BIOS_DEBUG, "Link M1=%d, N1=%d\n", -+ link_m1, link_n1); -+ printk(BIOS_DEBUG, "Pixel N=%d, M1=%d, M2=%d, P1=%d\n", -+ pixel_n, pixel_m1, pixel_m2, pixel_p1); -+ printk(BIOS_DEBUG, "Pixel clock %d kHz\n", -+ BASE_FREQUECY * (5 * (pixel_m1 + 2) + (pixel_m2 + 2) / (pixel_n + 2) -+ / (pixel_p1 * 10))); - - mdelay(1); -- write32(mmio + FP0(0), 0x31108); -- write32(mmio + DPLL(0), -- DPLL_VCO_ENABLE | DPLLB_MODE_DAC_SERIAL -- | DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 -- | 0x10601 -- ); -+ write32(mmio + FP0(0), (pixel_n << 16) -+ | (pixel_m1 << 8) | pixel_m2); -+ write32(mmio + DPLL(0), DPLL_VCO_ENABLE -+ | DPLL_VGA_MODE_DIS | DPLLB_MODE_DAC_SERIAL -+ | (0x10000 << (pixel_p1 - 1)) -+ | (6 << 9)); -+ - mdelay(1); -- write32(mmio + DPLL(0), -- DPLL_VCO_ENABLE | DPLLB_MODE_DAC_SERIAL -- | DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 -- | 0x10601 -- ); -+ write32(mmio + DPLL(0), DPLL_VCO_ENABLE -+ | DPLL_VGA_MODE_DIS | DPLLB_MODE_DAC_SERIAL -+ | (0x10000 << (pixel_p1 - 1)) -+ | (6 << 9)); - - write32(mmio + ADPA, ADPA_DAC_ENABLE - | ADPA_PIPE_A_SELECT - | ADPA_CRT_HOTPLUG_MONITOR_COLOR - | ADPA_CRT_HOTPLUG_ENABLE -- | ADPA_USE_VGA_HVPOLARITY - | ADPA_VSYNC_CNTL_ENABLE - | ADPA_HSYNC_CNTL_ENABLE - | ADPA_DPMS_ON -- ); -+ | (vpolarity ? ADPA_VSYNC_ACTIVE_LOW : -+ ADPA_VSYNC_ACTIVE_HIGH) -+ | (hpolarity ? ADPA_HSYNC_ACTIVE_LOW : -+ ADPA_HSYNC_ACTIVE_HIGH)); - - write32(mmio + HTOTAL(0), -- ((hactive - 1) << 16) -+ ((hactive + right_border + hblank - 1) << 16) - | (hactive - 1)); - write32(mmio + HBLANK(0), -- ((hactive - 1) << 16) -- | (hactive - 1)); -+ ((hactive + right_border + hblank - 1) << 16) -+ | (hactive + right_border - 1)); - write32(mmio + HSYNC(0), -- ((hactive - 1) << 16) -- | (hactive - 1)); -+ ((hactive + right_border + hfront_porch + hsync - 1) << 16) -+ | (hactive + right_border + hfront_porch - 1)); - -- write32(mmio + VTOTAL(0), ((vactive - 1) << 16) -- | (vactive - 1)); -- write32(mmio + VBLANK(0), ((vactive - 1) << 16) -+ write32(mmio + VTOTAL(0), ((vactive + bottom_border + vblank - 1) << 16) - | (vactive - 1)); -+ write32(mmio + VBLANK(0), ((vactive + bottom_border + vblank - 1) << 16) -+ | (vactive + bottom_border - 1)); - write32(mmio + VSYNC(0), -- ((vactive - 1) << 16) -- | (vactive - 1)); -+ ((vactive + bottom_border + vfront_porch + vsync - 1) << 16) -+ | (vactive + bottom_border + vfront_porch - 1)); - - write32(mmio + PIPECONF(0), PIPECONF_DISABLE); - - write32(mmio + PF_WIN_POS(0), 0); -- -- write32(mmio + PIPESRC(0), (639 << 16) | 399); -- write32(mmio + PF_CTL(0), PF_ENABLE | PF_FILTER_MED_3x3); -- write32(mmio + PF_WIN_SZ(0), vactive | (hactive << 16)); -- write32(mmio + PFIT_CONTROL, 0xa0000000); -+ if (IS_ENABLED(CONFIG_FRAMEBUFFER_KEEP_VESA_MODE)) { -+ write32(mmio + PIPESRC(0), ((hactive - 1) << 16) -+ | (vactive - 1)); -+ write32(mmio + PF_CTL(0), 0); -+ write32(mmio + PF_WIN_SZ(0), 0); -+ write32(mmio + PFIT_CONTROL, 0); -+ } else { -+ write32(mmio + PIPESRC(0), (639 << 16) | 399); -+ write32(mmio + PF_CTL(0), PF_ENABLE | PF_FILTER_MED_3x3); -+ write32(mmio + PF_WIN_SZ(0), vactive | (hactive << 16)); -+ write32(mmio + PFIT_CONTROL, 0x80000000); -+ } - - mdelay(1); - -+ write32(mmio + PIPE_DATA_M1(0), 0x7e000000 | data_m1); -+ write32(mmio + PIPE_DATA_N1(0), data_n1); -+ write32(mmio + PIPE_LINK_M1(0), link_m1); -+ write32(mmio + PIPE_LINK_N1(0), link_n1); -+ - write32(mmio + 0x000f000c, 0x00002040); - mdelay(1); - write32(mmio + 0x000f000c, 0x00002050); - write32(mmio + 0x00060100, 0x00044000); - mdelay(1); -+ write32(mmio + PIPECONF(0), PIPECONF_BPP_6); -+ write32(mmio + 0x000f0008, 0x00000040); -+ write32(mmio + 0x000f000c, 0x00022050); -+ write32(mmio + PIPECONF(0), PIPECONF_BPP_6 | PIPECONF_DITHER_EN); - write32(mmio + PIPECONF(0), PIPECONF_ENABLE - | PIPECONF_BPP_6 | PIPECONF_DITHER_EN); - -- write32(mmio + VGACNTRL, 0x0); -- write32(mmio + DSPCNTR(0), DISPLAY_PLANE_ENABLE | DISPPLANE_BGRX888); -- mdelay(1); -+ if (IS_ENABLED(CONFIG_FRAMEBUFFER_KEEP_VESA_MODE)) { -+ write32(mmio + VGACNTRL, VGA_DISP_DISABLE); -+ write32(mmio + DSPCNTR(0), DISPLAY_PLANE_ENABLE -+ | DISPPLANE_BGRX888); -+ mdelay(1); -+ } else { -+ write32(mmio + VGACNTRL, 0xc4008e); -+ } - - write32(mmio + ADPA, ADPA_DAC_ENABLE - | ADPA_PIPE_A_SELECT - | ADPA_CRT_HOTPLUG_MONITOR_COLOR - | ADPA_CRT_HOTPLUG_ENABLE -- | ADPA_USE_VGA_HVPOLARITY - | ADPA_VSYNC_CNTL_ENABLE - | ADPA_HSYNC_CNTL_ENABLE - | ADPA_DPMS_ON -- ); -+ | (vpolarity ? ADPA_VSYNC_ACTIVE_LOW : -+ ADPA_VSYNC_ACTIVE_HIGH) -+ | (hpolarity ? ADPA_HSYNC_ACTIVE_LOW : -+ ADPA_HSYNC_ACTIVE_HIGH)); - -- vga_textmode_init(); -+ write32(mmio + PP_CONTROL, PANEL_POWER_ON | PANEL_POWER_RESET); - -- /* Enable screen memory. */ -+ /* Enable screen memory. */ - vga_sr_write(1, vga_sr_read(1) & ~0x20); - - /* Clear interrupts. */ - write32(mmio + DEIIR, 0xffffffff); - write32(mmio + SDEIIR, 0xffffffff); -+ -+ if (IS_ENABLED(CONFIG_FRAMEBUFFER_KEEP_VESA_MODE)) { -+ memset((void *) lfb, 0, -+ edid.x_resolution * edid.y_resolution * 4); -+ set_vbe_mode_info_valid(&edid, lfb); -+ } -+ -+ - } - - /* compare the header of the vga edid header */ -@@ -480,6 +645,7 @@ static u8 vga_connected(u8 *mmio) - u8 vga_edid[128]; - u8 header[8] = {0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00}; - intel_gmbus_read_edid(mmio + GMBUS0, 2, 0x50, vga_edid, 128); -+ intel_gmbus_stop(mmio + GMBUS0); - for (int i = 0; i < 8; i++) { - if (vga_edid[i] != header[i]) { - printk(BIOS_DEBUG, "VGA not connected. Using LVDS display\n"); -@@ -566,7 +732,8 @@ static void gma_func0_init(struct device *dev) - "Initializing VGA without OPROM. MMIO 0x%llx\n", - gtt_res->base); - if (vga_connected(res2mmio(gtt_res, 0, 0))) -- gma_init_vga(conf, res2mmio(gtt_res, 0, 0)); -+ gma_init_vga(conf, res2mmio(gtt_res, 0, 0), -+ physbase, pio_res->base, lfb_res->base); - else - gma_init_lvds(conf, res2mmio(gtt_res, 0, 0), - physbase, pio_res->base, lfb_res->base); --- -2.9.3 - diff --git a/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/w500_4mb/0004-gm45-gma.c-use-correct-id-string-for-fake-VBT.patch b/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/w500_4mb/0004-gm45-gma.c-use-correct-id-string-for-fake-VBT.patch deleted file mode 100644 index fb30c4c2..00000000 --- a/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/w500_4mb/0004-gm45-gma.c-use-correct-id-string-for-fake-VBT.patch +++ /dev/null @@ -1,31 +0,0 @@ -From d7fe366539f2a492b4a64030618506690bfbb232 Mon Sep 17 00:00:00 2001 -From: Arthur Heymans <arthur@aheymans.xyz> -Date: Thu, 8 Sep 2016 22:21:54 +0200 -Subject: [PATCH] gm45/gma.c: use correct id string for fake VBT - -The correct id string for gm45 is "$VBT CANTIGA ". -This can be found in the gm45 option rom: -"strings vbios.bin | grep VBT". - -Change-Id: Icd67a87dac774b4b3c211511c784c4fb4e2ea97c -Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> ---- - src/northbridge/intel/gm45/gma.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/src/northbridge/intel/gm45/gma.c b/src/northbridge/intel/gm45/gma.c -index d5f6471..19bd944 100644 ---- a/src/northbridge/intel/gm45/gma.c -+++ b/src/northbridge/intel/gm45/gma.c -@@ -425,7 +425,7 @@ static void gma_func0_init(struct device *dev) - - /* Linux relies on VBT for panel info. */ - generate_fake_intel_oprom(&conf->gfx, dev, -- "$VBT IRONLAKE-MOBILE"); -+ "$VBT CANTIGA "); - } - } - --- -2.9.3 - diff --git a/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/w500_4mb/reused.list b/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/w500_4mb/reused.list index 59e0a36a..30301d55 100644 --- a/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/w500_4mb/reused.list +++ b/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/w500_4mb/reused.list @@ -4,4 +4,3 @@ /resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/t400_8mb/0002-make-256M-vram-the-default-for-gm45-laptops.patch /resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/t400_8mb/0003-hardcode-use-on-intel-integrated-graphic-device-on-t.patch /resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/x200_8mb/0001-gm45-gma.c-clean-up-some-registers.patch -/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/x200_8mb/0001-nb-intel-gm45-Fix-IOMMU.patch diff --git a/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/w500_8mb/0002-gm45-gma.c-use-screen-on-vga-connector-if-connected.patch b/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/w500_8mb/0002-gm45-gma.c-use-screen-on-vga-connector-if-connected.patch deleted file mode 100644 index 26632b7d..00000000 --- a/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/w500_8mb/0002-gm45-gma.c-use-screen-on-vga-connector-if-connected.patch +++ /dev/null @@ -1,212 +0,0 @@ -From 51dc727c71bbb10519a670b83b67a84f704e003a Mon Sep 17 00:00:00 2001 -From: Arthur Heymans <arthur@aheymans.xyz> -Date: Mon, 22 Aug 2016 17:58:46 +0200 -Subject: [PATCH 1/2] gm45/gma.c: use screen on vga connector if connected - -The intel x4x and gm45 have very similar integrated graphic devices. -Currently the x4x native graphic init enables VGA, while gm45 can output -on LVDS. - -This patch reuses the x4x graphic initialisation code -to enable output on VGA in gm45 in a way that the behavior is similar to vbios: -If no VGA display is connected the internal LVDS screen is used. -If an external screen is detected on the VGA port it will be used instead. - -Change-Id: I7e9ff793a5384ad8b4220fb1c0d9b28e6cee8391 -Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> ---- - src/northbridge/intel/gm45/gma.c | 157 ++++++++++++++++++++++++++++++++++++++- - 1 file changed, 153 insertions(+), 4 deletions(-) - -diff --git a/src/northbridge/intel/gm45/gma.c b/src/northbridge/intel/gm45/gma.c -index d5f6471..74c9bc3 100644 ---- a/src/northbridge/intel/gm45/gma.c -+++ b/src/northbridge/intel/gm45/gma.c -@@ -47,7 +47,7 @@ void gtt_write(u32 reg, u32 data) - write32(res2mmio(gtt_res, reg, 0), data); - } - --static void intel_gma_init(const struct northbridge_intel_gm45_config *info, -+static void gma_init_lvds(const struct northbridge_intel_gm45_config *info, - u8 *mmio, u32 physbase, u16 piobase, u32 lfb) - { - -@@ -101,7 +101,7 @@ static void intel_gma_init(const struct northbridge_intel_gm45_config *info, - sizeof(edid_data), &edid); - mode = &edid.mode; - -- /* Disable screen memory to prevent garbage from appearing. */ -+ /* Disable screen memory to prevent garbage from appearing. */ - vga_sr_write(1, vga_sr_read(1) | 0x20); - - hactive = edid.x_resolution; -@@ -344,6 +344,152 @@ static void intel_gma_init(const struct northbridge_intel_gm45_config *info, - } - } - -+static void gma_init_vga(const struct northbridge_intel_gm45_config *info, -+ u8 *mmio) -+{ -+ -+ int i; -+ u32 hactive, vactive; -+ -+ vga_gr_write(0x18, 0); -+ -+ write32(mmio + VGA0, 0x31108); -+ write32(mmio + VGA1, 0x31406); -+ -+ write32(mmio + ADPA, ADPA_DAC_ENABLE -+ | ADPA_PIPE_A_SELECT -+ | ADPA_CRT_HOTPLUG_MONITOR_COLOR -+ | ADPA_CRT_HOTPLUG_ENABLE -+ | ADPA_USE_VGA_HVPOLARITY -+ | ADPA_VSYNC_CNTL_ENABLE -+ | ADPA_HSYNC_CNTL_ENABLE -+ | ADPA_DPMS_ON -+ ); -+ -+ write32(mmio + 0x7041c, 0x0); -+ write32(mmio + DPLL_MD(0), 0x3); -+ write32(mmio + DPLL_MD(1), 0x3); -+ -+ vga_misc_write(0x67); -+ -+ const u8 cr[] = { 0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f, -+ 0x00, 0x4f, 0x0d, 0x0e, 0x00, 0x00, 0x00, 0x00, -+ 0x9c, 0x8e, 0x8f, 0x28, 0x1f, 0x96, 0xb9, 0xa3, -+ 0xff -+ }; -+ vga_cr_write(0x11, 0); -+ -+ for (i = 0; i <= 0x18; i++) -+ vga_cr_write(i, cr[i]); -+ -+ /* Disable screen memory to prevent garbage from appearing. */ -+ vga_sr_write(1, vga_sr_read(1) | 0x20); -+ -+ hactive = 640; -+ vactive = 400; -+ -+ mdelay(1); -+ write32(mmio + FP0(0), 0x31108); -+ write32(mmio + DPLL(0), -+ DPLL_VCO_ENABLE | DPLLB_MODE_DAC_SERIAL -+ | DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 -+ | 0x10601 -+ ); -+ mdelay(1); -+ write32(mmio + DPLL(0), -+ DPLL_VCO_ENABLE | DPLLB_MODE_DAC_SERIAL -+ | DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 -+ | 0x10601 -+ ); -+ -+ write32(mmio + ADPA, ADPA_DAC_ENABLE -+ | ADPA_PIPE_A_SELECT -+ | ADPA_CRT_HOTPLUG_MONITOR_COLOR -+ | ADPA_CRT_HOTPLUG_ENABLE -+ | ADPA_USE_VGA_HVPOLARITY -+ | ADPA_VSYNC_CNTL_ENABLE -+ | ADPA_HSYNC_CNTL_ENABLE -+ | ADPA_DPMS_ON -+ ); -+ -+ write32(mmio + HTOTAL(0), -+ ((hactive - 1) << 16) -+ | (hactive - 1)); -+ write32(mmio + HBLANK(0), -+ ((hactive - 1) << 16) -+ | (hactive - 1)); -+ write32(mmio + HSYNC(0), -+ ((hactive - 1) << 16) -+ | (hactive - 1)); -+ -+ write32(mmio + VTOTAL(0), ((vactive - 1) << 16) -+ | (vactive - 1)); -+ write32(mmio + VBLANK(0), ((vactive - 1) << 16) -+ | (vactive - 1)); -+ write32(mmio + VSYNC(0), -+ ((vactive - 1) << 16) -+ | (vactive - 1)); -+ -+ write32(mmio + PIPECONF(0), PIPECONF_DISABLE); -+ -+ write32(mmio + PF_WIN_POS(0), 0); -+ -+ write32(mmio + PIPESRC(0), (639 << 16) | 399); -+ write32(mmio + PF_CTL(0), PF_ENABLE | PF_FILTER_MED_3x3); -+ write32(mmio + PF_WIN_SZ(0), vactive | (hactive << 16)); -+ write32(mmio + PFIT_CONTROL, 0xa0000000); -+ -+ mdelay(1); -+ -+ write32(mmio + 0x000f000c, 0x00002040); -+ mdelay(1); -+ write32(mmio + 0x000f000c, 0x00002050); -+ write32(mmio + 0x00060100, 0x00044000); -+ mdelay(1); -+ write32(mmio + PIPECONF(0), PIPECONF_ENABLE -+ | PIPECONF_BPP_6 | PIPECONF_DITHER_EN); -+ -+ write32(mmio + VGACNTRL, 0x0); -+ write32(mmio + DSPCNTR(0), DISPLAY_PLANE_ENABLE | DISPPLANE_BGRX888); -+ mdelay(1); -+ -+ write32(mmio + ADPA, ADPA_DAC_ENABLE -+ | ADPA_PIPE_A_SELECT -+ | ADPA_CRT_HOTPLUG_MONITOR_COLOR -+ | ADPA_CRT_HOTPLUG_ENABLE -+ | ADPA_USE_VGA_HVPOLARITY -+ | ADPA_VSYNC_CNTL_ENABLE -+ | ADPA_HSYNC_CNTL_ENABLE -+ | ADPA_DPMS_ON -+ ); -+ -+ vga_textmode_init(); -+ -+ /* Enable screen memory. */ -+ vga_sr_write(1, vga_sr_read(1) & ~0x20); -+ -+ /* Clear interrupts. */ -+ write32(mmio + DEIIR, 0xffffffff); -+ write32(mmio + SDEIIR, 0xffffffff); -+} -+ -+/* compare the header of the vga edid header */ -+/* if vga is not connected it should not have a correct header */ -+static u8 vga_connected(u8 *mmio) -+{ -+ u8 vga_edid[128]; -+ u8 header[8] = {0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00}; -+ intel_gmbus_read_edid(mmio + GMBUS0, 2, 0x50, vga_edid, 128); -+ for (int i = 0; i < 8; i++) { -+ if (vga_edid[i] != header[i]) { -+ printk(BIOS_DEBUG, "VGA not connected. Using LVDS display\n"); -+ return 0; -+ } -+ } -+ printk(BIOS_SPEW, "VGA display connected\n"); -+ return 1; -+} -+ - static void gma_pm_init_post_vbios(struct device *const dev) - { - const struct northbridge_intel_gm45_config *const conf = dev->chip_info; -@@ -419,8 +565,11 @@ static void gma_func0_init(struct device *dev) - printk(BIOS_SPEW, - "Initializing VGA without OPROM. MMIO 0x%llx\n", - gtt_res->base); -- intel_gma_init(conf, res2mmio(gtt_res, 0, 0), physbase, -- pio_res->base, lfb_res->base); -+ if (vga_connected(res2mmio(gtt_res, 0, 0))) -+ gma_init_vga(conf, res2mmio(gtt_res, 0, 0)); -+ else -+ gma_init_lvds(conf, res2mmio(gtt_res, 0, 0), -+ physbase, pio_res->base, lfb_res->base); - } - - /* Linux relies on VBT for panel info. */ --- -2.9.3 - diff --git a/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/w500_8mb/0003-nb-gm45-gma.c-enable-VESA-framebuffer-mode-on-VGA-ou.patch b/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/w500_8mb/0003-nb-gm45-gma.c-enable-VESA-framebuffer-mode-on-VGA-ou.patch deleted file mode 100644 index ef42f3e8..00000000 --- a/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/w500_8mb/0003-nb-gm45-gma.c-enable-VESA-framebuffer-mode-on-VGA-ou.patch +++ /dev/null @@ -1,379 +0,0 @@ -From 44423cb3e0118b04739f89409e71a0ed1622ccd2 Mon Sep 17 00:00:00 2001 -From: Arthur Heymans <arthur@aheymans.xyz> -Date: Sat, 27 Aug 2016 01:09:19 +0200 -Subject: [PATCH 2/2] nb/gm45/gma.c: enable VESA framebuffer mode on VGA output - -This implements "Keep VESA framebuffer" behavior on VGA output of gm45. -This patch reuses Linux code to compute vga divisors. - -Change-Id: I2db5dd9bb1a7e309ca763b1559b89f7f5c8e6d3d -Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> ---- - src/northbridge/intel/gm45/gma.c | 251 ++++++++++++++++++++++++++++++++------- - 1 file changed, 209 insertions(+), 42 deletions(-) - -diff --git a/src/northbridge/intel/gm45/gma.c b/src/northbridge/intel/gm45/gma.c -index 74c9bc3..efaa210 100644 ---- a/src/northbridge/intel/gm45/gma.c -+++ b/src/northbridge/intel/gm45/gma.c -@@ -25,6 +25,7 @@ - #include <cpu/x86/msr.h> - #include <cpu/x86/mtrr.h> - #include <kconfig.h> -+#include <commonlib/helpers.h> - - #include "drivers/intel/gma/i915_reg.h" - #include "chip.h" -@@ -35,6 +36,8 @@ - #include <pc80/vga.h> - #include <pc80/vga_io.h> - -+#define BASE_FREQUECY 96000 -+ - static struct resource *gtt_res = NULL; - - u32 gtt_read(u32 reg) -@@ -345,14 +348,38 @@ static void gma_init_lvds(const struct northbridge_intel_gm45_config *info, - } - - static void gma_init_vga(const struct northbridge_intel_gm45_config *info, -- u8 *mmio) -+ u8 *mmio, u32 physbase, u16 piobase, u32 lfb) - { - - int i; -- u32 hactive, vactive; -+ u8 edid_data[128]; -+ struct edid edid; -+ struct edid_mode *mode; -+ u32 hactive, vactive, right_border, bottom_border; -+ int hpolarity, vpolarity; -+ u32 vsync, hsync, vblank, hblank, hfront_porch, vfront_porch; -+ u32 target_frequency; -+ u32 smallest_err = 0xffffffff; -+ u32 pixel_p1 = 1; -+ u32 pixel_n = 1; -+ u32 pixel_m1 = 1; -+ u32 pixel_m2 = 1; -+ u32 link_frequency = info->gfx.link_frequency_270_mhz ? 270000 : 162000; -+ u32 data_m1; -+ u32 data_n1 = 0x00800000; -+ u32 link_m1; -+ u32 link_n1 = 0x00040000; -+ - - vga_gr_write(0x18, 0); - -+ /* Setup GTT. */ -+ for (i = 0; i < 0x2000; i++) { -+ outl((i << 2) | 1, piobase); -+ outl(physbase + (i << 12) + 1, piobase + 4); -+ } -+ -+ - write32(mmio + VGA0, 0x31108); - write32(mmio + VGA1, 0x31406); - -@@ -363,8 +390,7 @@ static void gma_init_vga(const struct northbridge_intel_gm45_config *info, - | ADPA_USE_VGA_HVPOLARITY - | ADPA_VSYNC_CNTL_ENABLE - | ADPA_HSYNC_CNTL_ENABLE -- | ADPA_DPMS_ON -- ); -+ | ADPA_DPMS_ON); - - write32(mmio + 0x7041c, 0x0); - write32(mmio + DPLL_MD(0), 0x3); -@@ -382,95 +408,234 @@ static void gma_init_vga(const struct northbridge_intel_gm45_config *info, - for (i = 0; i <= 0x18; i++) - vga_cr_write(i, cr[i]); - -+ udelay(1); -+ -+ intel_gmbus_read_edid(mmio + GMBUS0, 2, 0x50, edid_data, 128); -+ intel_gmbus_stop(mmio + GMBUS0); -+ decode_edid(edid_data, -+ sizeof(edid_data), &edid); -+ mode = &edid.mode; -+ -+ - /* Disable screen memory to prevent garbage from appearing. */ - vga_sr_write(1, vga_sr_read(1) | 0x20); - -- hactive = 640; -- vactive = 400; -+ hactive = edid.x_resolution; -+ vactive = edid.y_resolution; -+ right_border = mode->hborder; -+ bottom_border = mode->vborder; -+ hpolarity = (mode->phsync == '-'); -+ vpolarity = (mode->pvsync == '-'); -+ vsync = mode->vspw; -+ hsync = mode->hspw; -+ vblank = mode->vbl; -+ hblank = mode->hbl; -+ hfront_porch = mode->hso; -+ vfront_porch = mode->vso; -+ target_frequency = mode->pixel_clock; -+ -+ if (IS_ENABLED(CONFIG_FRAMEBUFFER_KEEP_VESA_MODE)) { -+ vga_sr_write(1, 1); -+ vga_sr_write(0x2, 0xf); -+ vga_sr_write(0x3, 0x0); -+ vga_sr_write(0x4, 0xe); -+ vga_gr_write(0, 0x0); -+ vga_gr_write(1, 0x0); -+ vga_gr_write(2, 0x0); -+ vga_gr_write(3, 0x0); -+ vga_gr_write(4, 0x0); -+ vga_gr_write(5, 0x0); -+ vga_gr_write(6, 0x5); -+ vga_gr_write(7, 0xf); -+ vga_gr_write(0x10, 0x1); -+ vga_gr_write(0x11, 0); -+ -+ edid.bytes_per_line = (edid.bytes_per_line + 63) & ~63; -+ -+ write32(mmio + DSPCNTR(0), DISPLAY_PLANE_ENABLE -+ | DISPPLANE_BGRX888); -+ write32(mmio + DSPADDR(0), 0); -+ write32(mmio + DSPSTRIDE(0), edid.bytes_per_line); -+ write32(mmio + DSPSURF(0), 0); -+ for (i = 0; i < 0x100; i++) -+ write32(mmio + LGC_PALETTE(0) + 4 * i, i * 0x010101); -+ } else { -+ vga_textmode_init(); -+ } -+ -+ u32 candn, candm1, candm2, candp1; -+ for (candn = 1; candn <= 4; candn++) { -+ for (candm1 = 23; candm1 >= 17; candm1--) { -+ for (candm2 = 11; candm2 >= 5; candm2--) { -+ for (candp1 = 8; candp1 >= 1; candp1--) { -+ u32 m = 5 * (candm1 + 2) + (candm2 + 2); -+ u32 p = candp1 * 10; /* 10 == p2 */ -+ u32 vco = DIV_ROUND_CLOSEST(BASE_FREQUECY * m, candn + 2); -+ u32 dot = DIV_ROUND_CLOSEST(vco, p); -+ u32 this_err = ABS(dot - target_frequency); -+ if (this_err < smallest_err) { -+ smallest_err= this_err; -+ pixel_n = candn; -+ pixel_m1 = candm1; -+ pixel_m2 = candm2; -+ pixel_p1 = candp1; -+ } -+ } -+ } -+ } -+ } -+ -+ if (smallest_err == 0xffffffff) { -+ printk(BIOS_ERR, "Couldn't find GFX clock divisors\n"); -+ return; -+ } -+ -+ link_m1 = ((uint64_t)link_n1 * mode->pixel_clock) / link_frequency; -+ data_m1 = ((uint64_t)data_n1 * 18 * mode->pixel_clock) -+ / (link_frequency * 8 * 4); -+ -+ printk(BIOS_INFO, "bringing up panel at resolution %d x %d\n", -+ hactive, vactive); -+ printk(BIOS_DEBUG, "Borders %d x %d\n", -+ right_border, bottom_border); -+ printk(BIOS_DEBUG, "Blank %d x %d\n", -+ hblank, vblank); -+ printk(BIOS_DEBUG, "Sync %d x %d\n", -+ hsync, vsync); -+ printk(BIOS_DEBUG, "Front porch %d x %d\n", -+ hfront_porch, vfront_porch); -+ printk(BIOS_DEBUG, (info->gfx.use_spread_spectrum_clock -+ ? "Spread spectrum clock\n" : "DREF clock\n")); -+ printk(BIOS_DEBUG, "Polarities %d, %d\n", -+ hpolarity, vpolarity); -+ printk(BIOS_DEBUG, "Data M1=%d, N1=%d\n", -+ data_m1, data_n1); -+ printk(BIOS_DEBUG, "Link frequency %d kHz\n", -+ link_frequency); -+ printk(BIOS_DEBUG, "Link M1=%d, N1=%d\n", -+ link_m1, link_n1); -+ printk(BIOS_DEBUG, "Pixel N=%d, M1=%d, M2=%d, P1=%d\n", -+ pixel_n, pixel_m1, pixel_m2, pixel_p1); -+ printk(BIOS_DEBUG, "Pixel clock %d kHz\n", -+ BASE_FREQUECY * (5 * (pixel_m1 + 2) + (pixel_m2 + 2) / (pixel_n + 2) -+ / (pixel_p1 * 10))); - - mdelay(1); -- write32(mmio + FP0(0), 0x31108); -- write32(mmio + DPLL(0), -- DPLL_VCO_ENABLE | DPLLB_MODE_DAC_SERIAL -- | DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 -- | 0x10601 -- ); -+ write32(mmio + FP0(0), (pixel_n << 16) -+ | (pixel_m1 << 8) | pixel_m2); -+ write32(mmio + DPLL(0), DPLL_VCO_ENABLE -+ | DPLL_VGA_MODE_DIS | DPLLB_MODE_DAC_SERIAL -+ | (0x10000 << (pixel_p1 - 1)) -+ | (6 << 9)); -+ - mdelay(1); -- write32(mmio + DPLL(0), -- DPLL_VCO_ENABLE | DPLLB_MODE_DAC_SERIAL -- | DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 -- | 0x10601 -- ); -+ write32(mmio + DPLL(0), DPLL_VCO_ENABLE -+ | DPLL_VGA_MODE_DIS | DPLLB_MODE_DAC_SERIAL -+ | (0x10000 << (pixel_p1 - 1)) -+ | (6 << 9)); - - write32(mmio + ADPA, ADPA_DAC_ENABLE - | ADPA_PIPE_A_SELECT - | ADPA_CRT_HOTPLUG_MONITOR_COLOR - | ADPA_CRT_HOTPLUG_ENABLE -- | ADPA_USE_VGA_HVPOLARITY - | ADPA_VSYNC_CNTL_ENABLE - | ADPA_HSYNC_CNTL_ENABLE - | ADPA_DPMS_ON -- ); -+ | (vpolarity ? ADPA_VSYNC_ACTIVE_LOW : -+ ADPA_VSYNC_ACTIVE_HIGH) -+ | (hpolarity ? ADPA_HSYNC_ACTIVE_LOW : -+ ADPA_HSYNC_ACTIVE_HIGH)); - - write32(mmio + HTOTAL(0), -- ((hactive - 1) << 16) -+ ((hactive + right_border + hblank - 1) << 16) - | (hactive - 1)); - write32(mmio + HBLANK(0), -- ((hactive - 1) << 16) -- | (hactive - 1)); -+ ((hactive + right_border + hblank - 1) << 16) -+ | (hactive + right_border - 1)); - write32(mmio + HSYNC(0), -- ((hactive - 1) << 16) -- | (hactive - 1)); -+ ((hactive + right_border + hfront_porch + hsync - 1) << 16) -+ | (hactive + right_border + hfront_porch - 1)); - -- write32(mmio + VTOTAL(0), ((vactive - 1) << 16) -- | (vactive - 1)); -- write32(mmio + VBLANK(0), ((vactive - 1) << 16) -+ write32(mmio + VTOTAL(0), ((vactive + bottom_border + vblank - 1) << 16) - | (vactive - 1)); -+ write32(mmio + VBLANK(0), ((vactive + bottom_border + vblank - 1) << 16) -+ | (vactive + bottom_border - 1)); - write32(mmio + VSYNC(0), -- ((vactive - 1) << 16) -- | (vactive - 1)); -+ ((vactive + bottom_border + vfront_porch + vsync - 1) << 16) -+ | (vactive + bottom_border + vfront_porch - 1)); - - write32(mmio + PIPECONF(0), PIPECONF_DISABLE); - - write32(mmio + PF_WIN_POS(0), 0); -- -- write32(mmio + PIPESRC(0), (639 << 16) | 399); -- write32(mmio + PF_CTL(0), PF_ENABLE | PF_FILTER_MED_3x3); -- write32(mmio + PF_WIN_SZ(0), vactive | (hactive << 16)); -- write32(mmio + PFIT_CONTROL, 0xa0000000); -+ if (IS_ENABLED(CONFIG_FRAMEBUFFER_KEEP_VESA_MODE)) { -+ write32(mmio + PIPESRC(0), ((hactive - 1) << 16) -+ | (vactive - 1)); -+ write32(mmio + PF_CTL(0), 0); -+ write32(mmio + PF_WIN_SZ(0), 0); -+ write32(mmio + PFIT_CONTROL, 0); -+ } else { -+ write32(mmio + PIPESRC(0), (639 << 16) | 399); -+ write32(mmio + PF_CTL(0), PF_ENABLE | PF_FILTER_MED_3x3); -+ write32(mmio + PF_WIN_SZ(0), vactive | (hactive << 16)); -+ write32(mmio + PFIT_CONTROL, 0x80000000); -+ } - - mdelay(1); - -+ write32(mmio + PIPE_DATA_M1(0), 0x7e000000 | data_m1); -+ write32(mmio + PIPE_DATA_N1(0), data_n1); -+ write32(mmio + PIPE_LINK_M1(0), link_m1); -+ write32(mmio + PIPE_LINK_N1(0), link_n1); -+ - write32(mmio + 0x000f000c, 0x00002040); - mdelay(1); - write32(mmio + 0x000f000c, 0x00002050); - write32(mmio + 0x00060100, 0x00044000); - mdelay(1); -+ write32(mmio + PIPECONF(0), PIPECONF_BPP_6); -+ write32(mmio + 0x000f0008, 0x00000040); -+ write32(mmio + 0x000f000c, 0x00022050); -+ write32(mmio + PIPECONF(0), PIPECONF_BPP_6 | PIPECONF_DITHER_EN); - write32(mmio + PIPECONF(0), PIPECONF_ENABLE - | PIPECONF_BPP_6 | PIPECONF_DITHER_EN); - -- write32(mmio + VGACNTRL, 0x0); -- write32(mmio + DSPCNTR(0), DISPLAY_PLANE_ENABLE | DISPPLANE_BGRX888); -- mdelay(1); -+ if (IS_ENABLED(CONFIG_FRAMEBUFFER_KEEP_VESA_MODE)) { -+ write32(mmio + VGACNTRL, VGA_DISP_DISABLE); -+ write32(mmio + DSPCNTR(0), DISPLAY_PLANE_ENABLE -+ | DISPPLANE_BGRX888); -+ mdelay(1); -+ } else { -+ write32(mmio + VGACNTRL, 0xc4008e); -+ } - - write32(mmio + ADPA, ADPA_DAC_ENABLE - | ADPA_PIPE_A_SELECT - | ADPA_CRT_HOTPLUG_MONITOR_COLOR - | ADPA_CRT_HOTPLUG_ENABLE -- | ADPA_USE_VGA_HVPOLARITY - | ADPA_VSYNC_CNTL_ENABLE - | ADPA_HSYNC_CNTL_ENABLE - | ADPA_DPMS_ON -- ); -+ | (vpolarity ? ADPA_VSYNC_ACTIVE_LOW : -+ ADPA_VSYNC_ACTIVE_HIGH) -+ | (hpolarity ? ADPA_HSYNC_ACTIVE_LOW : -+ ADPA_HSYNC_ACTIVE_HIGH)); - -- vga_textmode_init(); -+ write32(mmio + PP_CONTROL, PANEL_POWER_ON | PANEL_POWER_RESET); - -- /* Enable screen memory. */ -+ /* Enable screen memory. */ - vga_sr_write(1, vga_sr_read(1) & ~0x20); - - /* Clear interrupts. */ - write32(mmio + DEIIR, 0xffffffff); - write32(mmio + SDEIIR, 0xffffffff); -+ -+ if (IS_ENABLED(CONFIG_FRAMEBUFFER_KEEP_VESA_MODE)) { -+ memset((void *) lfb, 0, -+ edid.x_resolution * edid.y_resolution * 4); -+ set_vbe_mode_info_valid(&edid, lfb); -+ } -+ -+ - } - - /* compare the header of the vga edid header */ -@@ -480,6 +645,7 @@ static u8 vga_connected(u8 *mmio) - u8 vga_edid[128]; - u8 header[8] = {0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00}; - intel_gmbus_read_edid(mmio + GMBUS0, 2, 0x50, vga_edid, 128); -+ intel_gmbus_stop(mmio + GMBUS0); - for (int i = 0; i < 8; i++) { - if (vga_edid[i] != header[i]) { - printk(BIOS_DEBUG, "VGA not connected. Using LVDS display\n"); -@@ -566,7 +732,8 @@ static void gma_func0_init(struct device *dev) - "Initializing VGA without OPROM. MMIO 0x%llx\n", - gtt_res->base); - if (vga_connected(res2mmio(gtt_res, 0, 0))) -- gma_init_vga(conf, res2mmio(gtt_res, 0, 0)); -+ gma_init_vga(conf, res2mmio(gtt_res, 0, 0), -+ physbase, pio_res->base, lfb_res->base); - else - gma_init_lvds(conf, res2mmio(gtt_res, 0, 0), - physbase, pio_res->base, lfb_res->base); --- -2.9.3 - diff --git a/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/w500_8mb/0004-gm45-gma.c-use-correct-id-string-for-fake-VBT.patch b/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/w500_8mb/0004-gm45-gma.c-use-correct-id-string-for-fake-VBT.patch deleted file mode 100644 index fb30c4c2..00000000 --- a/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/w500_8mb/0004-gm45-gma.c-use-correct-id-string-for-fake-VBT.patch +++ /dev/null @@ -1,31 +0,0 @@ -From d7fe366539f2a492b4a64030618506690bfbb232 Mon Sep 17 00:00:00 2001 -From: Arthur Heymans <arthur@aheymans.xyz> -Date: Thu, 8 Sep 2016 22:21:54 +0200 -Subject: [PATCH] gm45/gma.c: use correct id string for fake VBT - -The correct id string for gm45 is "$VBT CANTIGA ". -This can be found in the gm45 option rom: -"strings vbios.bin | grep VBT". - -Change-Id: Icd67a87dac774b4b3c211511c784c4fb4e2ea97c -Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> ---- - src/northbridge/intel/gm45/gma.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/src/northbridge/intel/gm45/gma.c b/src/northbridge/intel/gm45/gma.c -index d5f6471..19bd944 100644 ---- a/src/northbridge/intel/gm45/gma.c -+++ b/src/northbridge/intel/gm45/gma.c -@@ -425,7 +425,7 @@ static void gma_func0_init(struct device *dev) - - /* Linux relies on VBT for panel info. */ - generate_fake_intel_oprom(&conf->gfx, dev, -- "$VBT IRONLAKE-MOBILE"); -+ "$VBT CANTIGA "); - } - } - --- -2.9.3 - diff --git a/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/w500_8mb/reused.list b/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/w500_8mb/reused.list index 59e0a36a..30301d55 100644 --- a/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/w500_8mb/reused.list +++ b/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/w500_8mb/reused.list @@ -4,4 +4,3 @@ /resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/t400_8mb/0002-make-256M-vram-the-default-for-gm45-laptops.patch /resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/t400_8mb/0003-hardcode-use-on-intel-integrated-graphic-device-on-t.patch /resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/x200_8mb/0001-gm45-gma.c-clean-up-some-registers.patch -/resources/libreboot/patch/coreboot/d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4/grub/x200_8mb/0001-nb-intel-gm45-Fix-IOMMU.patch |