1 files changed, 0 insertions, 52 deletions
diff --git a/resources/memtest86/patch/config.h b/resources/memtest86/patch/config.h
deleted file mode 100644
index 10ac525a..00000000
--- a/resources/memtest86/patch/config.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * MemTest86+ V5 Specific code (GPL V2.0)
- * By Samuel DEMEULEMEESTER, sdemeule@memtest.org
- * http://www.canardpc.com - http://www.memtest.org
- * ------------------------------------------------
- * config.h - MemTest-86  Version 3.3
- *
- * Compile time configuration options
- *
- * Released under version 2 of the Gnu Public License.
- * By Chris Brady
- */
-
-/* CONSERVATIVE_SMP - If set to 0, SMP will be enabled by default */
-/* Might be enabled in future revision after extensive testing */
-/* In all cases, SMP is disabled by defaut on server platform */
-#define CONSERVATIVE_SMP 1
-
-/* BEEP_MODE - Beep on error. Default off, Change to 1 to enable */
-#define BEEP_MODE 1
-
-/* BEEP_END_NO_ERROR - Beep at end of each pass without error. Default off, Change to 1 to enable */
-#define BEEP_END_NO_ERROR 0
-
-/* PARITY_MEM - Enables support for reporting memory parity errors */
-/*	Experimental, normally enabled */
-#define PARITY_MEM
-
-/* SERIAL_CONSOLE_DEFAULT -  The default state of the serial console. */
-/*	This is normally off since it slows down testing.  Change to a 1 */
-/*	to enable. */
-#define SERIAL_CONSOLE_DEFAULT 0
-
-/* SERIAL_TTY - The default serial port to use. 0=ttyS0, 1=ttyS1 */ 
-#define SERIAL_TTY 0
-
-/* SERIAL_BAUD_RATE - Baud rate for the serial console */
-#define SERIAL_BAUD_RATE 115200
-
-/* SCRN_DEBUG - extra check for SCREEN_BUFFER
- */ 
-/* #define SCRN_DEBUG */
-
-/* APM - Turns off APM at boot time to avoid blanking the screen */
-/*	Normally enabled */
-#define APM_OFF
-
-/* USB_WAR - Enables a workaround for errors caused by BIOS USB keyboard */
-/*	and mouse support*/
-/*	Normally enabled */
-#define USB_WAR
-