diff options
Diffstat (limited to 'resources/scripts/misc/grubeditor.sh')
| -rw-r--r-- | resources/scripts/misc/grubeditor.sh | 218 |
1 files changed, 131 insertions, 87 deletions
diff --git a/resources/scripts/misc/grubeditor.sh b/resources/scripts/misc/grubeditor.sh index 025161f3..832e0dc6 100644 --- a/resources/scripts/misc/grubeditor.sh +++ b/resources/scripts/misc/grubeditor.sh @@ -46,6 +46,13 @@ # -D | --differ [/path/to/]differ: use /path/to/differ instead of "diff", can # be an interactive program like vimdiff +# THIS BLOCK IS EXPERIMENTAL +# Allow debugging by running DEBUG= ${0}. +[[ "x${DEBUG+set}" = 'xset' ]] && set -v +# -u kills the script if any variables are unassigned +# -e kills the script if any function returns not-zero +#set -u + # Define the list of available option in both short and long form. shortopts="hrie:sdD:" longopts="help,realcfg,inplace,editor:,swapcfgs,diffcfgs,differ:" @@ -154,7 +161,7 @@ determine_architecture() { case "${arch}" in armv7l|i686|x86_64) echo "Supported architecture \"${arch}\" detected. You may proceed." - cbfstool="./cbfstool/${arch}/cbfstool" + cbfstool="${0%/*}/cbfstool/${arch}/cbfstool" ;; *) echo "Unsupported architecture \"${arch}\" detected! You may not proceed." @@ -180,10 +187,108 @@ determine_operation() { # referenced within them either directly or indirectly from other helper # functions depending on the operations requested by the user. +# External command finders. +find_differ() { + found_differ=0 + + if [[ -n "${differ_rawarg}" ]]; then + which "${differ_rawarg}" &> /dev/null + if [[ $? -eq 0 ]]; then + echo "Using differ \"${differ_rawarg}\"..." + use_differ="${differ_rawarg}" + found_differ=1 + else + echo "The provided \"${differ_rawarg}\" is not a valid command!" + echo "Defaulting to ${default_differ}..." + use_differ="${default_differ}" + fi + fi + + if [[ $found_differ -eq 1 ]]; then + return + else + echo "Defaulting to ${default_differ}..." + use_differ="${default_differ}" + fi +} + +find_editor() { + found_editor=0 + + if [[ -n "${editor_rawarg}" ]]; then + which "${editor_rawarg}" &> /dev/null + if [[ $? -eq 0 ]]; then + echo "Using editor \"${editor_rawarg}\"..." + use_editor="${editor_rawarg}" + found_editor=1 + else + echo "The provided \"${editor_rawarg}\" is not a valid command!" + echo "Defaulting to ${default_editor}..." + use_editor="${default_editor}" + fi + fi + + if [[ $found_editor -eq 1 ]]; then + return + else + if [[ -n "${EDITOR}" ]]; then + which "${EDITOR}" &> /dev/null + if [[ $? -ne 0 ]]; then + echo "Your \$EDITOR is defined as ${EDITOR}, but is not a valid command!" + echo "(This is bad. I highly suggest fixing this in your ~/.bashrc.)" + echo "Defaulting to ${default_editor}..." + use_editor="${default_editor}" + else + echo "Using your defined \$EDITOR \"$EDITOR\"..." + use_editor="${EDITOR}" + fi + else + echo "\$EDITOR blank, defaulting to ${default_editor}..." + use_editor="${default_editor}" + fi + fi +} + +# Filename randomizer. +random_filer() { + # Inputs: + # $1 is a descriptive label for the file + # $2 is directory (becomes /tmp if not set) + [[ -n "${1}" ]] && label="${1}" || label="tempfile" + [[ -n "${2}" ]] && savedir="${2%/}" || savedir="/tmp" + + # Hardcoded string size for multiple good reasons (no processing weird + # input, prevent malicious overflows, etc.) + size=5 + + # Loop forever until a free filename is found. + while [[ 1 ]]; do + + # Read data from /dev/urandom and convert into random ASCII strings. + rand=$(cat /dev/urandom | tr -dc 'a-zA-Z' | fold -w $size | head -n 1) + + # Build a complete filename with a hardcoded extension. + possible="${savedir}/${label}_${rand}.tmp.cfg" + + # See if file doesn't exist and return it as string or keep going. + if [[ ! -f "${possible}" ]]; then + echo "${possible}" + break + fi + + done +} + +# Primary command functions. show_help() { cat << HELPSCREEN -${0} -- conveniently edit grub{test}.cfg files in Libreboot ROM image files by -automating their extraction with cbfstool and the user's editor of choice. +"${0}" -- conveniently edit grub{test}.cfg files in Libreboot ROM image files by automating their extraction with cbfstool and the user's editor of choice. + +Usage: + +"${0}" [OPTIONS] [ROMFILE] + +Options: -h | --help: show usage help @@ -192,15 +297,13 @@ automating their extraction with cbfstool and the user's editor of choice. -i | --inplace: do not create a .modified romfile, instead modify the existing file --e | --editor [/path/to/]editor: open the cfg file with /path/to/editor instead -of the value of \$EDITOR +-e | --editor [/path/to/]editor: open the cfg file with /path/to/editor instead of the value of \$EDITOR -s | --swapcfg: swap grub.cfg and grubtest.cfg -d | --diffcfg: diff grub.cfg and grubtest.cfg --D | --differ [/path/to/]differ: use /path/to/differ instead of "diff", can be -an interactive program like vimdiff +-D | --differ [/path/to/]differ: use /path/to/differ instead of "diff", can be an interactive program like vimdiff HELPSCREEN } @@ -218,8 +321,10 @@ swap_configs() { # 6. You're done! # Extract config files from provided romfile. - ${cbfstool} ${romfile} extract -n grub.cfg -f /tmp/real2test.cfg - ${cbfstool} ${romfile} extract -n grubtest.cfg -f /tmp/test2real.cfg + real2test="$(random_filer "real2test")" + test2real="$(random_filer "test2real")" + "${cbfstool}" "${romfile}" extract -n grub.cfg -f "${real2test}" + "${cbfstool}" "${romfile}" extract -n grubtest.cfg -f "${test2real}" # Determine whether to edit inplace or make a copy. if [[ $edit_inplace -eq 1 ]]; then @@ -230,15 +335,15 @@ swap_configs() { fi # Remove config files from the output file. - ${cbfstool} ${outfile} remove -n grub.cfg - ${cbfstool} ${outfile} remove -n grubtest.cfg + "${cbfstool}" "${outfile}" remove -n grub.cfg + "${cbfstool}" "${outfile}" remove -n grubtest.cfg # Embed new configs into the output file. - ${cbfstool} ${outfile} add -t raw -n grub.cfg -f /tmp/test2real.cfg - ${cbfstool} ${outfile} add -t raw -n grubtest.cfg -f /tmp/real2test.cfg + "${cbfstool}" ${outfile} add -t raw -n grub.cfg -f "${test2real}" + "${cbfstool}" ${outfile} add -t raw -n grubtest.cfg -f "${real2test}" # Delete the tempfiles. - rm /tmp/test2real.cfg /tmp/real2test.cfg + rm "${test2real}" "${real2test}" } diff_configs() { @@ -252,11 +357,11 @@ diff_configs() { find_differ # Extract config files from provided romfile. - ${cbfstool} ${romfile} extract -n grub.cfg -f /tmp/grub_tmpdiff.cfg - ${cbfstool} ${romfile} extract -n grubtest.cfg -f /tmp/grubtest_tmpdiff.cfg + "${cbfstool}" "${romfile}" extract -n grub.cfg -f /tmp/grub_tmpdiff.cfg + "${cbfstool}" "${romfile}" extract -n grubtest.cfg -f /tmp/grubtest_tmpdiff.cfg # Run the differ command with real as first option, test as second option. - ${use_differ} /tmp/grub_tmpdiff.cfg /tmp/grubtest_tmpdiff.cfg + "${use_differ}" /tmp/grub_tmpdiff.cfg /tmp/grubtest_tmpdiff.cfg } edit_config() { @@ -293,19 +398,19 @@ edit_config() { fi # Extract the desired configuration file from the romfile. - tmp_editme="/tmp/${thisconfig%.cfg}_editme.cfg" - ${cbfstool} ${romfile} extract -n ${thisconfig} -f ${tmp_editme} + tmp_editme="$(random_filer "${thisconfig%.cfg}")" + "${cbfstool}" "${romfile}" extract -n "${thisconfig}" -f "${tmp_editme}" # Launch the editor! - ${use_editor} ${tmp_editme} + "${use_editor}" "${tmp_editme}" # Did the user commit the edit? if [[ $? -eq 0 ]]; then # See if it actually changed from what exists in the cbfs. tmp_refcfg="/tmp/${thisconfig%.cfg}_ref.cfg" - ${cbfstool} ${romfile} extract -n ${thisconfig} -f ${tmp_refcfg} + "${cbfstool}" "${romfile}" extract -n "${thisconfig}" -f "${tmp_refcfg}" # Diff the files as quietly as possible. - diff -q ${tmp_editme} ${tmp_refcfg} &> /dev/null + diff -q "${tmp_editme}" "${tmp_refcfg}" &> /dev/null if [[ $? -ne 0 ]]; then # The files differ, so it won't be frivolous to update the config. # See if the user wants to edit the file in place. @@ -318,75 +423,14 @@ edit_config() { outfile="${romfile}.modified" fi # Remove the old config, add in the new one. - ${cbfstool} ${outfile} remove -n ${thisconfig} - ${cbfstool} ${outfile} add -t raw -n ${thisconfig} -f ${tmp_editme} + "${cbfstool}" "${outfile}" remove -n "${thisconfig}" + "${cbfstool}" "${outfile}" add -t raw -n "${thisconfig}" -f "${tmp_editme}" else echo "No changes to config file. Not updating the ROM image." fi # We are done with the config files. Delete them. - rm ${tmp_editme} - rm ${tmp_refcfg} - fi -} - -find_differ() { - found_differ=0 - - if [[ -n "${differ_rawarg}" ]]; then - which "${differ_rawarg}" &> /dev/null - if [[ $? -eq 0 ]]; then - echo "Using differ \"${differ_rawarg}\"..." - use_differ="${differ_rawarg}" - found_differ=1 - else - echo "The provided \"${differ_rawarg}\" is not a valid command!" - echo "Defaulting to ${default_differ}..." - use_differ="${default_differ}" - fi - fi - - if [[ $found_differ -eq 1 ]]; then - return - else - echo "Defaulting to ${default_differ}..." - use_differ="${default_differ}" - fi -} - -find_editor() { - found_editor=0 - - if [[ -n "${editor_rawarg}" ]]; then - which "${editor_rawarg}" &> /dev/null - if [[ $? -eq 0 ]]; then - echo "Using editor \"${editor_rawarg}\"..." - use_editor="${editor_rawarg}" - found_editor=1 - else - echo "The provided \"${editor_rawarg}\" is not a valid command!" - echo "Defaulting to ${default_editor}..." - use_editor="${default_editor}" - fi - fi - - if [[ $found_editor -eq 1 ]]; then - return - else - if [[ -n "${EDITOR}" ]]; then - which "${EDITOR}" &> /dev/null - if [[ $? -ne 0 ]]; then - echo "Your \$EDITOR is defined as ${EDITOR}, but is not a valid command!" - echo "(This is bad. I highly suggest fixing this in your ~/.bashrc.)" - echo "Defaulting to ${default_editor}..." - use_editor="${default_editor}" - else - echo "Using your defined \$EDITOR \"$EDITOR\"..." - use_editor="${EDITOR}" - fi - else - echo "\$EDITOR blank, defaulting to ${default_editor}..." - use_editor="${default_editor}" - fi + rm "${tmp_editme}" + rm "${tmp_refcfg}" fi } |