| Commit message (Collapse) | Author | Age | Files | Lines |
... | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
4MiB flash is the default for this board. A 16MiB config is not
included (yet) as I was unable to find a teardown of this device
(Asus Chromebit CS10) online to be sure that reassembly is possible.
Also, corebootfb is the only display mode available for this board;
as such, inclusion of the corebootfb subtarget serves only to
explicitly indicate the display mode when packaging ROMs upon
release.
Veyron Mickey Coreboot ROMs can be built with, e.g.:
'./libreboot build coreboot veyron mickey corebootfb 4mb'
|
|
|
|
|
|
|
| |
Veyron Jerry ROMs are built with Depthcharge as the default payload,
e.g.:
'./libreboot build coreboot veyron jerry corebootfb 4mb depthcharge'
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
4MiB flash is the default for this board. A 16MiB config is
included for those looking to modify their board with a larger flash
chip.
Also, corebootfb is the only display mode available for this board;
as such, inclusion of the corebootfb subtarget serves only to
explicitly indicate the display mode when packaging ROMs upon
release.
Veyron Jerry Coreboot ROMs can be built with, e.g.:
'./libreboot build coreboot veyron jerry corebootfb 4mb'
|
| |
|
| |
|
|
|
|
|
|
|
| |
Nyan Blaze ROMs are built with Depthcharge as the default payload,
e.g.:
'./libreboot build coreboot nyan blaze corebootfb 4mb depthcharge'
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
4MiB flash is the default for this board. A 16MiB config is
included for those looking to modify their board with a larger flash
chip.
Also, corebootfb is the only display mode available for this board;
as such, inclusion of the corebootfb subtarget serves only to
explicitly indicate the display mode when packaging ROMs upon
release.
Nyan Blaze Coreboot ROMs can be built with, e.g.:
'./libreboot build coreboot nyan blaze corebootfb 4mb'
|
|
|
|
|
|
| |
Nyan Big ROMs are built with Depthcharge as its default payload, e.g.:
'./libreboot build coreboot nyan big corebootfb 4mb depthcharge'
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
4MiB flash is the default for this board. A 16MiB config is
included for those looking to modify their board with a larger flash
chip.
Also, corebootfb is the only display mode available for this board;
as such, inclusion of the corebootfb subtarget serves only to
explicitly indicate the display mode when packaging ROMs upon
release.
Nyan Big Coreboot ROMs can be built with, e.g.:
'./libreboot build coreboot nyan big corebootfb 4mb'
|
|
|
|
|
| |
Necessary to build Depthcharge for Nyan Big and Nyan Blaze with
their respective defconfig.
|
|
|
|
|
|
| |
Options updated (with new values):
CONFIG_VBOOT_FWID_VERSION="$(KERNELVERSION)"
# CONFIG_GBB_FLAG_DISABLE_EC_SOFTWARE_SYNC is not set
|
|
|
|
|
| |
Config updated using 'olddefconfig' make target with revision
located at "projects/coreboot/configs/revision"
|
|
|
|
|
|
|
| |
Options updated (with new values):
CONFIG_VBOOT_FWID_VERSION="$(KERNELVERSION)"
CONFIG_GBB_FLAG_ENABLE_ALTERNATE_OS=y
CONFIG_GBB_FLAG_FORCE_DEV_SWITCH_ON=y
|
|
|
|
|
| |
Config updated using 'olddefconfig' make target with revision
located at "projects/coreboot/configs/revision"
|
|
|
|
|
|
|
|
| |
Options updated (with new values):
CONFIG_COMPRESS_RAMSTAGE=y
CONFIG_VBOOT_FWID_VERSION="$(KERNELVERSION)"
CONFIG_GBB_FLAG_ENABLE_ALTERNATE_OS=y
CONFIG_GBB_FLAG_FORCE_DEV_SWITCH_ON=y
|
|
|
|
|
| |
Config updated using 'olddefconfig' make target with revision
located at "projects/coreboot/configs/revision"
|
|
|
|
|
|
|
| |
Options updated (with new values):
CONFIG_COMPRESS_RAMSTAGE=y
CONFIG_VBOOT_FWID_VERSION="$(KERNELVERSION)"
# CONFIG_GBB_FLAG_DISABLE_EC_SOFTWARE_SYNC is not set
|
|
|
|
|
| |
Config updated using 'olddefconfig' make target with revision
located at "projects/coreboot/configs/revision"
|
|
|
|
|
|
|
|
| |
Options updated (with new values):
CONFIG_COMPRESS_RAMSTAGE=y
CONFIG_VBOOT_FWID_VERSION="$(KERNELVERSION)"
CONFIG_GBB_FLAG_ENABLE_ALTERNATE_OS=y
CONFIG_GBB_FLAG_FORCE_DEV_SWITCH_ON=y
|
|
|
|
|
| |
Config updated using 'olddefconfig' make target with revision
located at "projects/coreboot/configs/revision"
|
|
|
|
|
|
|
|
| |
Options updated (with new values):
CONFIG_COMPRESS_RAMSTAGE=y
CONFIG_VBOOT_FWID_VERSION="$(KERNELVERSION)"
CONFIG_GBB_FLAG_ENABLE_ALTERNATE_OS=y
CONFIG_GBB_FLAG_FORCE_DEV_SWITCH_ON=y
|
|
|
|
|
| |
Config updated using 'olddefconfig' make target with revision
located at "projects/coreboot/configs/revision"
|
|
|
|
|
|
|
| |
D510MO ROMs can now be built with either SeaBIOS or GRUB as
a default payload, e.g.:
'./libreboot build coreboot d510mo textmode 1mb seabios'
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
1MiB flash is the default for this board. A 16MiB config is
included for those looking to modify their board with a larger flash
chip.
Also, text mode is the only display mode available for this board;
as such, inclusion of the textmode subtarget serves only to
explicitly indicate the display mode when packaging ROMs upon
release.
D510MO Coreboot ROMs can be built with, e.g.:
'./libreboot build coreboot d510mo textmode 1mb'
|
|
|
|
|
|
|
|
|
|
|
| |
Due to the limited flash space on the board, SeaBIOS is currently
the sole payload option when building 512KiB-sized ROMs.
D945GCLF ROMs can now be built with either SeaBIOS or GRUB as
a default payload, e.g.:
'./libreboot build coreboot d945gclf textmode 512kb seabios', or
'./libreboot build coreboot d945gclf textmode 16mb grub'
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
512KiB flash is the default for this board. A 16MiB config is
included for those looking to modify their board with a larger flash
chip.
Also, text mode is the only display mode available for this board;
as such, inclusion of the textmode subtarget serves only to
explicitly indicate the display mode when packaging ROMs upon
release.
D945GCLF Coreboot ROMs can be built with, e.g.:
'./libreboot build coreboot d945gclf textmode 512kb'
|
|
|
|
|
|
|
| |
GA-G41M-ES2L ROMs can now be built with either SeaBIOS or GRUB as
a default payload, e.g.:
'./libreboot build coreboot ga-g41m-es2l corebootfb 1mb seabios'
|
|
|
|
|
|
|
|
| |
1MiB flash is the default for this board. A 16MiB config is included
for those looking to modify their board with larger flash chips.
GA-G41M-ES2L Coreboot ROMs can be built with, e.g.:
'./libreboot build coreboot ga-g41m-es2l textmode 1mb'
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The corebootfb ROM will use Coreboot's framebuffer for display while
the textmode ROM will use the legacy VGA text mode which is necessary
for payloads such as Memtest86+.
Options (and their values) changed in the new corebootfb config:
#CONFIG_VGA_TEXT_FRAMEBUFFER is not set
CONFIG_GENERIC_LINEAR_FRAMEBUFFER=y
CONFIG_LINEAR_FRAMEBUFFER=y
GA-G41M-ES2L Coreboot ROMs can now be built with
'./libreboot build coreboot ga-g41m-es2l corebootfb' or
'./libreboot build coreboot ga-g41m-es2l textmode', respectively.
|
|
|
|
|
|
|
| |
KCMA-D8 ROMs can now be built with either SeaBIOS or GRUB as
a default payload, e.g.:
'./libreboot build coreboot kcma-d8 textmode 2mb seabios'
|
|
|
|
|
|
|
|
|
|
| |
Text mode is the only display mode available for this board;
as such, inclusion of the textmode subtarget serves only to
explicitly indicate the display mode when packaging ROMs upon
release.
KCMA-D8 Coreboot ROMs can be built with, e.g.:
'./libreboot build coreboot kcma-d8 textmode 2mb'
|
|
|
|
|
|
|
| |
KFSN4-DRE ROMs can now be built with either SeaBIOS or GRUB as
a default payload, e.g.:
'./libreboot build coreboot kfsn4-dre textmode 2mb seabios'
|
|
|
|
|
|
|
|
| |
1MiB flash is the default for this board but can be upgraded to 2MiB,
thus the inclusion of the 2MiB config.
KFSN4-DRE Coreboot ROMs can be built with, e.g.:
'./libreboot build coreboot kfsn4-dre textmode 2mb'
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The corebootfb ROM will use Coreboot's framebuffer for display while
the textmode ROM will use the legacy VGA text mode which is necessary
for payloads such as Memtest86+.
Options (and their values) changed in the new corebootfb config:
#CONFIG_VGA_TEXT_FRAMEBUFFER is not set
CONFIG_GENERIC_LINEAR_FRAMEBUFFER=y
CONFIG_LINEAR_FRAMEBUFFER=y
KFSN4-DRE Coreboot ROMs can now be built with
'./libreboot build coreboot kfsn4-dre corebootfb' or
'./libreboot build coreboot kfsn4-dre textmode', respectively.
|
|
|
|
|
|
|
| |
KGPE-D16 ROMs can now be built with either SeaBIOS or GRUB as
a default payload, e.g.:
'./libreboot build coreboot kgpe-d16 textmode 2mb seabios'
|
|
|
|
|
|
|
|
|
|
|
|
| |
Text mode is the only display mode available for this board;
as such, inclusion of the textmode subtarget serves only to
explicitly indicate the display mode when packaging ROMs upon
release.
The 16mb target is included as an example.
KGPE-D16 Coreboot ROMs can be built with, e.g.:
'./libreboot build coreboot kgpe-d16 textmode 2mb'
|
|
|
|
|
|
|
| |
Macbook2,1 ROM can now be built with either SeaBIOS or GRUB as a
default payload, e.g.:
'./libreboot build coreboot macbook21 textmode 2mb seabios'
|
|
|
|
|
|
|
| |
The 16mb target is included as an example.
Macbook2,1 Coreboot ROMs can be built with, e.g.:
'./libreboot build coreboot macbook21 corebootfb 2mb'
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The corebootfb ROM will use Coreboot's framebuffer for display while
the textmode ROM will use the legacy VGA text mode which is necessary
for payloads such as Memtest86+.
Options (and their values) changed in the new corebootfb config:
#CONFIG_VGA_TEXT_FRAMEBUFFER is not set
CONFIG_GENERIC_LINEAR_FRAMEBUFFER=y
CONFIG_LINEAR_FRAMEBUFFER=y
Macbook2,1 Coreboot ROMs can now be built with
'./libreboot build coreboot macbook21 corebootfb' or
'./libreboot build coreboot macbook21 textmode', respectively.
|
|
|
|
|
|
|
| |
T60 ROM can now be built with either SeaBIOS or GRUB as a
default payload, e.g.:
'./libreboot build coreboot t60 textmode 2mb seabios'
|
|
|
|
|
|
|
| |
The 16mb target is included as an example.
T60 Coreboot ROMs can be built with, e.g.:
'./libreboot build coreboot t60 corebootfb 2mb'
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The corebootfb ROM will use Coreboot's framebuffer for display while
the textmode ROM will use the legacy VGA text mode which is necessary
for payloads such as Memtest86+.
Options (and their values) changed in the new corebootfb config:
#CONFIG_VGA_TEXT_FRAMEBUFFER is not set
CONFIG_GENERIC_LINEAR_FRAMEBUFFER=y
CONFIG_LINEAR_FRAMEBUFFER=y
T60 Coreboot ROMs can now be built with
'./libreboot build coreboot t60 corebootfb' or
'./libreboot build coreboot t60 textmode', respectively.
|
|
|
|
|
|
|
| |
X60 ROM can now be built with either SeaBIOS or GRUB as a
default payload, e.g.:
'./libreboot build coreboot x60 textmode 2mb seabios'
|
|
|
|
|
|
|
|
|
|
|
| |
These configurations will be read and supplied to make as
command-line arguments and override those defined in the config at
projects/coreboot/configs/x60/config
The 16mb target is included as an example.
X60 Coreboot ROMs can be built with, e.g.:
'./libreboot build coreboot x60 corebootfb 2mb'
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The corebootfb ROM will use Coreboot's framebuffer for display while
the textmode ROM will use the legacy VGA text mode which is necessary
for payloads such as Memtest86+.
Options (and their values) changed in the new corebootfb config:
#CONFIG_VGA_TEXT_FRAMEBUFFER is not set
CONFIG_GENERIC_LINEAR_FRAMEBUFFER=y
CONFIG_LINEAR_FRAMEBUFFER=y
X60 Coreboot ROMs can now be built with
'./libreboot build coreboot x60 corebootfb' or
'./libreboot build coreboot x60 textmode', respectively.
|
|
|
|
|
| |
This avoids an error being printed about a non-existent path when
building Coreboot for boards without variants.
|
| |
|
|
|
|
|
|
|
| |
X200 can now be built with either SeaBIOS or GRUB as a default
payload, e.g.:
'./libreboot build coreboot x200 textmode 16mb seabios'
|
|
|
|
|
|
|
|
|
| |
These configurations will be read and supplied to make as
command-line arguments and override those defined in the config at
projects/coreboot/configs/x200/config
X200 Coreboot ROMs can be built with, e.g.:
'./libreboot build coreboot x200 corebootfb 8mb'
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The corebootfb ROM will use Coreboot's framebuffer for display while
the textmode ROM will use the legacy VGA text mode which is necessary
for payloads such as Memtest86+.
Options (and their values) changed in the new corebootfb config:
CONFIG_GENERIC_LINEAR_FRAMEBUFFER=y
CONFIG_LINEAR_FRAMEBUFFER=y
X200 Coreboot ROMs can now be built with
'./libreboot build coreboot x200 corebootfb' or
'./libreboot build coreboot x200 textmode', respectively.
|