aboutsummaryrefslogtreecommitdiff
path: root/resources
Commit message (Collapse)AuthorAgeFilesLines
* download/flashrom: git checkout 0.9.9 instead of git reset commithashArthur Heymans2016-06-271-1/+2
|
* x60,t60: delete manually added c4 stateArthur Heymans2016-06-192-147/+0
| | | | | | | The ich7 datasheet "Intel® I/O Controller Hub 7 (ICH7) Family" has a reg called GEN_PMCON_1 in which c3 can automatically be upgraded to c4. This is already set in coreboot.
* Disable native PS2 keyboard initArthur Heymans2016-06-1919-19/+19
| | | | | | Both grub and seabios can do keyboard init on their own. This option only slows down the boot process. On the x60 it even makes the keyboard unresponsive.
* Add sound card config for x60Arthur Heymans2016-06-191-0/+65
| | | | | | | | | | | | | The sound card on the x60 is not configured in coreboot. This causes the headphones not to be automatically detected/used when inserted which it does on the vendor bios. The internal microphone is also not set as default. I found on the coreboot wiki how to get the config from vendor bios. In GNU/linux run: for x in /sys/class/sound/card0/hw*; do cat "$x/init_pin_configs" > pin_"$(basename "$x")"; done for x in /proc/asound/card0/codec#*; do cat "$x" > "$(basename "$x")"; done which gives the pin config of the vendor bios.
* grub.cfg: also search cd/dvd for ata 2-3 (for G41M)Leah Woods2016-06-011-1/+1
|
* Add dependency to list for Trisquel Add de Trisquel 77Leah Woods2016-06-011-1/+1
|
* docs: revert absolute paths for image references to relative pathsPaul Koenig2016-06-019-10/+8
|
* Enable extended states and dynamic L2 cacheArthur Heymans2016-06-013-0/+52
| | | | | | | | | | | | | This patch sets msr bits to enable dynamic L2 cache which is a requirement for C4E, which is also enabled by this patch. the bit for C2E is also set. Those msr bits are taken from later cpus and seem to work fine. C2 state performs particularly bad. Before this patch it consumed ~17-18W. After this patch it dropped to 14W. Idle power usage (C4) seems to remain very similar.
* update the dependencies list for Trisquel 7Leah Woods2016-05-301-1/+1
|
* docs: build scriptsPaul Koenig2016-05-2612-0/+369
| | | | | also update libreboot.texi to use absolute paths for references to images, logs, etc.
* GA-G41M-ES2L: Update patches to fix NIC in GNU/Linux (autoconfig works now)Leah Woods2016-05-245-48/+207
|
* gm45: 256M default vramArthur Heymans2016-05-2412-0/+214
| | | | | | 352M vram seems to be quite unstable on targets with 4GB or more. 256M has yet to show issues on different ram configurations. This might be a good default for libreboot.
* Revert GM45 352MiB VRAM patch for now, we'll re-add it later once stableLeah Woods2016-05-2212-212/+0
|
* 352M for gm45 now with failsafe if something goes wrong with cmos.Arthur Heymans2016-05-2212-0/+212
|
* Remove patch for 352MiB VRAM on GM45Leah Woods2016-05-2213-256/+0
|
* (bootfix) GRUB-only boards: actually use GRUB as payload, not SeaBIOSLeah Woods2016-05-221-1/+0
|
* bring back the old backgrounds. They were betterLeah Woods2016-05-214-3/+3
|
* Only use SeaGRUB on i945, KCMA-D8 and KGPE-D16Leah Woods2016-05-211-14/+27
|
* build/roms/withgrub: add 16:10 background to 16MiB GM45 laptop configsLeah Woods2016-05-211-2/+2
|
* All board: payload now named payload.elfLeah Woods2016-05-2130-39/+37
|
* ga-g41m-es2l: disable CONFIG_PCIEXP_COMMON_CLOCK in config (bootfix)Leah Woods2016-05-211-1/+1
|
* use usbdebug on ga-g41m-es2lLeah Woods2016-05-211-1/+11
|
* use seagrub on ga-g41m-es2lLeah Woods2016-05-211-2/+4
|
* Use damo22's config for ga-g41m-es2lLeah Woods2016-05-211-20/+8
|
* grub.cfg: also do ata devices for encryption (for ga-g41m-es2l)Leah Woods2016-05-211-2/+4
|
* grub.cfg: Also search on ATA devices (for GA-G41M-ES2L which uses IDE emu)Leah Woods2016-05-211-0/+12
|
* Fix broken NIC on GA-G41-ES2L, courtesy of damo22 on IRCLeah Woods2016-05-214-30/+377
|
* GA-G41-ES2L: upgrade to recommended coreboot revisionLeah Woods2016-05-215-1/+403
|
* actually, 3 seconds is enoughLeah Woods2016-05-201-1/+1
| | | | | According to damo22 on IRC, PS/2 only needs 1.2 seconds. Coreboot sets it 3s by default, so let's just use coreboot's default setting.
* SeaGRUB: reduce timeout from 60s to 6sLeah Woods2016-05-201-1/+1
| | | | | Still higher than default, but tolerable now for those using headless systems.
* build/roms/withgrub: use cbfstool add-int for 0s delay in cbfs (SeaGRUB)Leah Woods2016-05-201-4/+1
|
* Don't use SeaVGABIOS on systems that use SeaGRUBLeah Woods2016-05-208-21/+135
|
* seabios boards: also hardcode cmos settings, like on grub boardsLeah Woods2016-05-203-3/+3
|
* seabios board configs: update to fix broken automated buildLeah Woods2016-05-202-80/+62
|
* Add boards: use a static CMOS option table, for consistencyLeah Woods2016-05-2018-18/+19
| | | | | | | | | | This also forces GM45 to use 352MiB RAM for the Video RAM, for the Intel GPU. It's implemented in such a way where the user configures it using nvramtool. Hardcode it. This should also force the century byte to be reset on GM45, for those users who were affected by this previous issue.
* Typo fix, now build dependencies parabola worksArthur Heymans2016-05-191-3/+3
|
* forgot some newlines in reused.listArthur Heymans2016-05-195-5/+10
|
* set vram on gm45 to 352MArthur Heymans2016-05-1913-5/+256
| | | | | | | | | | | | | This patch enables all vram sizes and sets the default to 352M for libreboot. Normally users have to clear their vram for this to happen. using "nvram -c random" But there a 2 better option: coreboot provides to always load the defaults in its menuconfig update the flashscript to reset cmos Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
* build/roms/withgrub: fix broken build (use bash properly. grep is not needed)Leah Woods2016-05-191-9/+3
|
* build/roms/withgrub: Don't add timeout file to ROM if it already existsLeah Woods2016-05-191-2/+4
|
* typofixLeah Woods2016-05-191-1/+1
|
* build/roms/withgrub: (buildfix) add missing "print" to cbfstool commandLeah Woods2016-05-191-1/+1
|
* build/roms/withgrub: (buildfix) only delete ps2-keyboard-spinup if it existsLeah Woods2016-05-191-2/+4
|
* build/roms/withgrub: (buildfix) remove existing default timeout fileLeah Woods2016-05-191-2/+5
| | | | Also increase our timeout from 20s to 60s.
* grub.cfg: change timeout back to 1s (instead of 10s). SeaBIOS does timeout nowLeah Woods2016-05-191-1/+1
|
* build/roms/withgrub: add timeout for SeaBIOS (needed on some boards)Leah Woods2016-05-191-0/+3
|
* build/roms/withgrub: typofix in scriptLeah Woods2016-05-191-1/+1
|
* build/roms/withgrub: add grub to the ROM using add-payload, not addLeah Woods2016-05-191-2/+3
|
* build only x86 and arm gccLeah Woods2016-05-191-1/+3
|
* Implement SeaGRUB and make it the default payload on all current GRUB boardsLeah Woods2016-05-1826-26/+61
|
generated by cgit v1.2.3-70-g09d2 (git 2.47.0) at 2024-11-01 18:29:12 +0000