From 5f83d76f7f116cfa624077edb8c60238794acdfc Mon Sep 17 00:00:00 2001 From: Francis Rowe Date: Thu, 3 Sep 2015 01:13:06 +0100 Subject: docs/gnulinux/encrypted_parabola.html: Fix HTML errors/formatting --- docs/gnulinux/encrypted_parabola.html | 56 +++++++++++++++++------------------ 1 file changed, 28 insertions(+), 28 deletions(-) (limited to 'docs/gnulinux') diff --git a/docs/gnulinux/encrypted_parabola.html b/docs/gnulinux/encrypted_parabola.html index ff04370b..723203c3 100644 --- a/docs/gnulinux/encrypted_parabola.html +++ b/docs/gnulinux/encrypted_parabola.html @@ -491,17 +491,17 @@ FONT=Lat9w-16
-

Follow-up tutorial: configuring Parabola

-

+

Follow-up tutorial: configuring Parabola

+

We will modify grub.config inside the ROM and do all kinds of fun stuff, but I recommend that you first transform the current bare-bones Parabola install into a more useable system. Doing so will make the upcoming ROM modifications MUCH easier to perform and less risky! configuring_parabola.html shows my own notes post-installation. Using these, you can get a basic - system similar to the one that I chose for myself. You can also cherry pick useful notes and come up with your own system. - Parabola is user-centric, which means that you are in control. For more information, read The Arch Way - (Parabola also follows it). -

+ system similar to the one that I chose for myself. You can also cherry pick useful notes and come up with your own system. + Parabola is user-centric, which means that you are in control. For more information, read The Arch Way + (Parabola also follows it). +

-
+
@@ -515,9 +515,9 @@ FONT=Lat9w-16

I will go for the re-flash option here. Firstly, cd to the libreboot_util/cbfstool/{armv7l i686 x86_64} directory. - Dump the current firmware - where libreboot.rom is an example: make sure to adapt:
- # flashrom -p internal -r libreboot.rom
- You can check if everything is in there (grub.cfg and grubtest.cfg would be really nice):
+ Dump the current firmware - where libreboot.rom is an example: make sure to adapt:
+ # flashrom -p internal -r libreboot.rom
+ You can check if everything is in there (grub.cfg and grubtest.cfg would be really nice):
$ ./cbfstool libreboot.rom print
Extract grubtest.cfg:
$ ./cbfstool libreboot.rom extract -n grubtest.cfg -f grubtest.cfg
@@ -526,14 +526,14 @@ FONT=Lat9w-16

- In grubtest.cfg, inside the 'Load Operating System' menu entry, change the contents to:
- - cryptomount -a
- set root='lvm/matrix-rootvol'
- linux /boot/vmlinuz-linux-libre-lts root=/dev/matrix/rootvol cryptdevice=/dev/sda1:root
- initrd /boot/initramfs-linux-libre-lts.img - + In grubtest.cfg, inside the 'Load Operating System' menu entry, change the contents to:

+
+cryptomount -a

+set root='lvm/matrix-rootvol'

+linux /boot/vmlinuz-linux-libre-lts root=/dev/matrix/rootvol cryptdevice=/dev/sda1:root

+initrd /boot/initramfs-linux-libre-lts.img
+

Note: the underlined parts above (-lts) can also be removed, to boot the latest kernel instead of LTS (long-term support) kernels. @@ -555,15 +555,15 @@ FONT=Lat9w-16

- AGAIN: MAKE SURE TO DO THIS WHOLE SECTION ON grubtest.cfg *BEFORE* DOING IT ON grub.cfg. - (When we get there, upon reboot, select the menu entry that says Switch to grubtest.cfg and test that it works. - Only once you are satisfied, copy that to grub.cfg. Only a few steps to go, though.) - WHY? BECAUSE AN INCORRECTLY SET PASSWORD CONFIG MEANS YOU CAN'T AUTHENTICATE, WHICH MEANS 'BRICK'. -

+ AGAIN: MAKE SURE TO DO THIS WHOLE SECTION ON grubtest.cfg *BEFORE* DOING IT ON grub.cfg. + (When we get there, upon reboot, select the menu entry that says Switch to grubtest.cfg and test that it works. + Only once you are satisfied, copy that to grub.cfg. Only a few steps to go, though.) + WHY? BECAUSE AN INCORRECTLY SET PASSWORD CONFIG MEANS YOU CAN'T AUTHENTICATE, WHICH MEANS 'BRICK'. +

- (emphasis added, because it's needed: this is a common roadblock for users.) -

+ (emphasis added, because it's needed: this is a common roadblock for users.) +

We need a utility that comes with GRUB, so we will download it temporarily. (Remember that GRUB isn't needed for booting, since it's already included as a payload in libreboot.) @@ -583,12 +583,12 @@ FONT=Lat9w-16

Next, back in grubtest.cfg, above the first 'Load Operating System' menu entry, you should now add your GRUB password, like so - (replace with your own name (I used root on both lines, feel free to choose another one) and the password hash which you copied): + (replace with your own name (I used root on both lines, feel free to choose another one) and the password hash which you copied):

- 

+
 set superusers="root"
 password_pbkdf2 root grub.pbkdf2.sha512.10000.711F186347156BC105CD83A2ED7AF1EB971AA2B1EB2640172F34B0DEFFC97E654AF48E5F0C3B7622502B76458DA494270CC0EA6504411D676E6752FD1651E749.8DD11178EB8D1F633308FD8FCC64D0B243F949B9B99CCEADE2ECA11657A757D22025986B0FA116F1D5191E0A22677674C994EDBFADE62240E9D161688266A711
-	

+

Save your changes in grubtest.cfg, then delete the unmodified config from the ROM image:
@@ -615,7 +615,7 @@ password_pbkdf2 root grub.pbkdf2.sha512.10000.711F186347156BC105CD83A2ED7AF1EB97

If it does not work like you want it to, if you are unsure or sceptical in any way, don't despair: you have been wise and did not brick your device! Reboot and login the default way, and then modify your grubtest.cfg until you get it right! - Do *not* proceed past this point unless you are 100% sure that your new configuration is safe (or desirable) to use. + Do *not* proceed past this point unless you are 100% sure that your new configuration is safe (or desirable) to use.

-- cgit v1.2.3-70-g09d2