From 0e3520f74d25bc43572a1afeaa4439bfedcc0d78 Mon Sep 17 00:00:00 2001 From: Francis Rowe Date: Sun, 28 Jun 2015 02:20:19 +0100 Subject: s/machine/system It was annoying me. --- docs/install/x60_unbrick.html | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'docs/install/x60_unbrick.html') diff --git a/docs/install/x60_unbrick.html b/docs/install/x60_unbrick.html index 0822a716..d420cb67 100644 --- a/docs/install/x60_unbrick.html +++ b/docs/install/x60_unbrick.html @@ -26,7 +26,7 @@ Types of brick: @@ -45,20 +45,20 @@ dd if=coreboot.rom of=top64k.bin bs=1 skip=$[$(stat -c %s coreboot.rom) - 0x10000] count=64k
dd if=coreboot.rom bs=1 skip=$[$(stat -c %s coreboot.rom) - 0x20000] count=64k | hexdump
dd if=top64k.bin of=coreboot.rom bs=1 seek=$[$(stat -c %s coreboot.rom) - 0x20000] count=64k conv=notrunc
- (doing this makes the ROM suitable for use when flashing a machine that still has Lenovo BIOS running, + (doing this makes the ROM suitable for use when flashing a system that still has Lenovo BIOS running, using those instructions: http://www.coreboot.org/Board:lenovo/x60/Installation.

-

bad rom (or user error), machine won't boot

+

bad rom (or user error), system won't boot

- In this scenario, you compiled a ROM that had an incorrect configuration, or there is an actual bug preventing your machine from - booting. Or, maybe, you set BUC.TS to 0 and shut down after first flash while Lenovo BIOS was running. In any case, your machine is bricked and will not boot at all. + In this scenario, you compiled a ROM that had an incorrect configuration, or there is an actual bug preventing your system from + booting. Or, maybe, you set BUC.TS to 0 and shut down after first flash while Lenovo BIOS was running. In any case, your system is bricked and will not boot at all.

- "Unbricking" means flashing a known-good (working) ROM. The problem: you can't boot the machine, making this difficult. In this situation, external hardware (see hardware requirements above) is needed which can flash the SPI chip (where libreboot resides). + "Unbricking" means flashing a known-good (working) ROM. The problem: you can't boot the system, making this difficult. In this situation, external hardware (see hardware requirements above) is needed which can flash the SPI chip (where libreboot resides).

Remove those screws:
@@ -223,7 +223,7 @@ POMONA 5250:

- Connect the wifi antenna cables. At the start of the tutorial, this machine had an Intel wifi chip. Here you see I've replaced it with an + Connect the wifi antenna cables. At the start of the tutorial, this system had an Intel wifi chip. Here you see I've replaced it with an Atheros AR5B95 (supports 802.11n and can be used without blobs):

-- cgit v1.2.3-70-g09d2