ASUS KFSN4-DRE server/workstation board

This is a server board using AMD hardware (Fam10h). It can also be used for building a high-powered workstation. Powered by libreboot.

NOTE: This board is unsupported in libreboot 20150518. To use it in libreboot, for now, you must build for it from source using the libreboot git repository.

These boards use LPC flash (not SPI), in a PLCC socket. The default flash size 1MiB (8Mbits), and can be upgraded to 2MiB (16Mbits). SST49LF080A is the default that the board uses. SST49LF016C is an example of a 2MiB (16Mbits) chip, which might work. It is believed that 2MiB (16Mbits) is the maximum size available for the flash chip.

Flashing instructions can be found at ../install/index.html#flashrom

Back to previous index.

Hex-core CPUs

PCB revision 1.05G is the best version of this board (the revision number will be printed on the board), because it can use dual hex-core CPUs (Opteron 2400/8400 series). Other revisions are believed to only support dual quad-core CPUs.

Current issues

• There seems to be a 30 second bootblock delay (observed by tpearson); the system otherwise boots and works as expected. See text/kfsn4-dre/bootlog.txt - this uses the 'simple' bootblock, while tpearson uses the 'normal' bootblock. He says that he will look into this.

Copyright © 2015 Francis Rowe <info@gluglug.org.uk>
This document is released under the Creative Commons Attribution-ShareAlike 4.0 International Public License and all future versions. A copy of the license can be found at ../cc-by-sa-4.txt.

This document is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See ../cc-by-sa-4.txt for more information.