1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
|
<!DOCTYPE html>
<html>
<head>
<meta charset="utf-8">
<meta name="viewport" content="width=device-width, initial-scale=1">
<style type="text/css">
@import url('../css/main.css');
</style>
<title>ThinkPad T500: flashing tutorial (BeagleBone Black)</title>
</head>
<body>
<div class="section">
<h1 id="pagetop">Flashing the T500 with a BeagleBone Black</h1>
<p>Initial flashing instructions for T500.</p>
<p>
This guide is for those who want libreboot on their ThinkPad T500
while they still have the original Lenovo BIOS present. This guide
can also be followed (adapted) if you brick your T500, to know how
to recover.
</p>
<p><a href="index.html">Back to main index</a></p>
</div>
<div class="section" id="cpu_compatibility">
<h1>A note about CPUs</h1>
<p>
<a href="http://www.thinkwiki.org/wiki/Category:T500">ThinkWiki</a> has a list of CPUs
for this system. The Core 2 Duo P8400, P8600 and P8700 are believed to work in libreboot.
The T9600 was also tested on the T400 and confirmed working, so the T9400/T9500/T9550 probably
also work, but they are untested.
</p>
</div>
<div class="section" id="switchable_graphics">
<h1>A note about GPUs</h1>
<p>
This guide currently assumes that you have an Intel GPU (non-switchable).
Some T500 have switchable graphics (ATI), which means that you can choose between ATI or Intel
in the <i>BIOS setup</i>. When switching to Intel, is lenovobios not enabling ATI
(where ATI is disabled by default and the system uses the Intel chip), or are they
disabling it (where the system uses the ATI chip by default)?
</p>
<p>
Basically, switchable graphics is untested, but it should be easy to get it working
(if it doesn't already work).
</p>
<h1>CPU paste required</h1>
<p>
See <a href="#paste">#paste</a>.
</p>
</div>
<div class="section">
<h1 id="flashchips">Flash chips</h1>
<p>
The T500 will use an 8MiB or 64Mb SOIC-16 chip (rare models
will use a 4MiB or 32Mb SOIC-8 chip).
</p>
<p>
<a href="#pagetop">Back to top of page.</a>
</p>
</div>
<div class="section photos">
<h1 id="macaddress">MAC address</h1>
<p>
On the T500, the MAC address for the onboard
gigabit ethernet chipset is stored inside the flash chip,
along with other configuration data.
</p>
<p>
Keep a note of the MAC address before disassembly; this is
very important, because you will need to insert this into
the libreboot ROM image before flashing it.
It will be written in one of these locations:
</p>
<p>
<img src="images/t400/macaddress0.jpg" alt="" />
<img src="images/t400/macaddress1.jpg" alt="" />
<img src="images/x200/disassembly/0001.jpg" alt="" />
</p>
</div>
<div class="section photos">
<h1>Initial BBB configuration</h1>
<p>
Refer to <a href="bbb_setup.html">bbb_setup.html</a> for how to
configure the BBB for flashing.
</p>
<p>
The following shows how to connect clip to the BBB (on the P9 header), for SOIC-16 (clip: Pomona 5252):
</p>
<pre>
POMONA 5252 (correlate with the BBB guide)
=== ethernet jack and VGA port ====
NC - - 21
1 - - 17
NC - - NC
NC - - NC
NC - - NC
NC - - NC
18 - - 3.3V PSU RED
22 - - NC - this is pin 1 on the flash chip
=== SATA port ===
<i>This is how you will connect. Numbers refer to pin numbers on the BBB, on the plugs near the DC jack.</i><br/>
<img src="images/t400/0065.jpg" alt="" />
</pre>
<p>
The following shows how to connect clip to the BBB (on the P9 header), for SOIC-8 (clip: Pomona 5250):
</p>
<pre>
POMONA 5250 (correlate with the BBB guide)
=== RAM slots ====
18 - - 1
22 - - NC
NC - - 21
3.3V PSU RED - - 17 - this is pin 1 on the flash chip
=== slot where the AC jack is connected ===<br/>
<img src="images/t500/0060.jpg" alt="" />
</pre>
<h2>
The procedure
</h2>
<p>
Remove all screws:<br/>
<img src="images/t500/0000.jpg" alt="" /><br/>
It is also advisable to, throughout the disassembly,
place any screws and/or components that you removed in
the same layout or arrangement. The follow photos demonstrate
this:<br/>
<img src="images/t500/0001.jpg" alt="" />
<img src="images/t500/0002.jpg" alt="" />
</p>
<p>
Remove the HDD/SSD and optical drive:<br/>
<img src="images/t500/0003.jpg" alt="" />
<img src="images/t500/0004.jpg" alt="" />
</p>
<p>
Remove the palm rest:<br/>
<img src="images/t500/0005.jpg" alt="" />
<img src="images/t500/0006.jpg" alt="" />
</p>
<p>
Remove the keyboard and rear bezel:<br/>
<img src="images/t500/0007.jpg" alt="" />
<img src="images/t500/0008.jpg" alt="" />
<img src="images/t500/0009.jpg" alt="" />
<img src="images/t500/0010.jpg" alt="" />
<img src="images/t500/0011.jpg" alt="" />
<img src="images/t500/0012.jpg" alt="" />
</p>
<p>
If you have a WWAN/3G card and/or sim card reader,
remove them permanently. The WWAN-3G card has DMA, and
proprietary firmware inside; the technology is identical
to what is used in mobile phones, so it can also track
your movements:<br/>
<img src="images/t500/0013.jpg" alt="" />
<img src="images/t500/0017.jpg" alt="" />
<img src="images/t500/0018.jpg" alt="" />
</p>
<p>
Remove this frame, and then remove the wifi chip:<br/>
<img src="images/t500/0014.jpg" alt="" />
<img src="images/t500/0015.jpg" alt="" />
<img src="images/t500/0016.jpg" alt="" />
</p>
<p>
Remove the speakers:<br/>
<img src="images/t500/0019.jpg" alt="" />
<img src="images/t500/0020.jpg" alt="" />
<img src="images/t500/0021.jpg" alt="" />
<img src="images/t500/0022.jpg" alt="" />
<img src="images/t500/0023.jpg" alt="" />
<img src="images/t500/0024.jpg" alt="" />
<img src="images/t500/0025.jpg" alt="" />
</p>
<p>
Remove the NVRAM battery (already removed in this photo):<br/>
<img src="images/t500/0026.jpg" alt="" />
</p>
<p>
When you re-assemble, you will be replacing the wifi chip
with another. These two screws don't hold anything together,
but they are included in your machine because the screw
holes for half-height cards are a different size, so
use these if you will be installing a half-height card:<br/>
<img src="images/t500/0027.jpg" alt="" />
</p>
<p>
Unroute the antenna wires:<br/>
<img src="images/t500/0028.jpg" alt="" />
<img src="images/t500/0029.jpg" alt="" />
<img src="images/t500/0030.jpg" alt="" />
<img src="images/t500/0031.jpg" alt="" />
</p>
<p>
Disconnect the LCD cable from the motherboard:<br/>
<img src="images/t500/0032.jpg" alt="" />
<img src="images/t500/0033.jpg" alt="" />
</p>
<p>
Remove the LCD assembly hinge screws, and then remove the LCD
assembly:<br/>
<img src="images/t500/0034.jpg" alt="" />
<img src="images/t500/0035.jpg" alt="" />
<img src="images/t500/0036.jpg" alt="" />
</p>
<p>
Remove the fan and heatsink:<br/>
<img src="images/t500/0037.jpg" alt="" />
<img src="images/t500/0038.jpg" alt="" />
<img src="images/t500/0039.jpg" alt="" />
</p>
<p>
Remove this screw:<br/>
<img src="images/t500/0040.jpg" alt="" />
</p>
<p>
Remove these cables, keeping note of how and in what
arrangement they are connected:<br/>
<img src="images/t500/0041.jpg" alt="" />
<img src="images/t500/0042.jpg" alt="" />
<img src="images/t500/0043.jpg" alt="" />
<img src="images/t500/0044.jpg" alt="" />
<img src="images/t500/0045.jpg" alt="" />
<img src="images/t500/0046.jpg" alt="" />
<img src="images/t500/0047.jpg" alt="" />
<img src="images/t500/0048.jpg" alt="" />
<img src="images/t500/0049.jpg" alt="" />
</p>
<p>
Disconnect the power jack:<br/>
<img src="images/t500/0050.jpg" alt="" />
<img src="images/t500/0051.jpg" alt="" />
</p>
<p>
Remove the motherboard and cage from the base
(the marked hole is where those cables were routed through):<br/>
<img src="images/t500/0052.jpg" alt="" />
<img src="images/t500/0053.jpg" alt="" />
</p>
<p>
Remove all screws, arranging them in the same layout
when placing the screws on a surface and marking each screw
hole (this is to reduce the possibility of putting them
back in the wrong holes):<br/>
<img src="images/t500/0054.jpg" alt="" />
<img src="images/t500/0055.jpg" alt="" />
</p>
<p>
Also remove this:<br/>
<img src="images/t500/0056.jpg" alt="" />
<img src="images/t500/0057.jpg" alt="" />
</p>
<p>
Separate the motherboard from the cage:<br/>
<img src="images/t500/0058.jpg" alt="" />
<img src="images/t500/0059.jpg" alt="" />
</p>
<p>
The flash chip is next to the memory slots. On this
machine, it was a SOIC-8 (4MiB or 32Mb) flash chip:<br/>
<img src="images/t500/0060.jpg" alt="" />
</p>
<p>
Connect your programmer, then connect GND and 3.3V<br/>
<img src="images/t500/0061.jpg" alt="" /><br/>
<img src="images/t400/0067.jpg" alt="" />
<img src="images/t400/0069.jpg" alt="" />
<img src="images/t400/0070.jpg" alt="" />
<img src="images/t400/0071.jpg" alt="" />
</p>
<p>
A dedicated 3.3V PSU was used to create this guide, but
at ATX PSU is also fine:<br/>
<img src="images/t400/0072.jpg" alt="" />
</p>
<p>
Of course, make sure to turn on your PSU:<br/>
<img src="images/x200/disassembly/0013.jpg" alt="" />
</p>
<p>
Now, you should be ready to install libreboot.
</p>
<p>
Flashrom binaries for ARM (tested on a BBB) are distributed in libreboot_util. Alternatively,
libreboot also distributes flashrom source code which can be built.
</p>
<p>
Log in as root on your BBB, using the instructions in <a href="bbb_setup.html#bbb_access">bbb_setup.html#bbb_access</a>.
</p>
<p>
Test that flashrom works:<br/>
# <b>./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512</b><br/>
In this case, the output was:
</p>
<pre>
flashrom v0.9.7-r1854 on Linux 3.8.13-bone47 (armv7l)
flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405(D)" (8192 kB, SPI) on linux_spi.
Found Macronix flash chip "MX25L6406E/MX25L6436E" (8192 kB, SPI) on linux_spi.
Found Macronix flash chip "MX25L6445E/MX25L6473E" (8192 kB, SPI) on linux_spi.
Multiple flash chip definitions match the detected chip(s): "MX25L6405(D)", "MX25L6406E/MX25L6436E", "MX25L6445E/MX25L6473E"
Please specify which chip definition to use with the -c <chipname> option.
</pre>
<p>
How to backup factory.rom (change the -c option as neeed, for your flash chip):<br/>
# <b>./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -r factory.rom</b><br/>
# <b>./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -r factory1.rom</b><br/>
# <b>./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -r factory2.rom</b><br/>
Note: the <b>-c</b> option is not required in libreboot's patched flashrom, because
the redundant flash chip definitions in <i>flashchips.c</i> have been removed.<br/>
Now compare the 3 images:<br/>
# <b>sha512sum factory*.rom</b><br/>
If the hashes match, then just copy one of them (the factory.rom) to a safe place (on a drive connected to another machine, not
the BBB). This is useful for reverse engineering work, if there is a desirable behaviour in the original firmware
that could be replicated in coreboot and libreboot.
</p>
<p>
Follow the instructions at <a href="../hcl/gm45_remove_me.html#ich9gen">../hcl/gm45_remove_me.html#ich9gen</a>
to change the MAC address inside the libreboot ROM image, before flashing it.
Although there is a default MAC address inside the ROM image, this is not what you want. <b>Make sure
to always change the MAC address to one that is correct for your system.</b>
</p>
<p>
Now flash it:<br/>
# <b>./flashrom -p linux_spi:dev=/dev/spidev1.0,spispeed=512 -w path/to/libreboot/rom/image.rom -V</b>
</p>
<p>
<img src="images/x200/disassembly/0015.jpg" alt="" />
</p>
<p>
You might see errors, but if it says <b>Verifying flash... VERIFIED</b> at the end, then it's flashed and should boot.
If you see errors, try again (and again, and again); the message <b>Chip content is identical to the requested image</b>
is also an indication of a successful installation.
</p>
<p>
Example output from running the command (see above):
</p>
<pre>
flashrom v0.9.7-r1854 on Linux 3.8.13-bone47 (armv7l)
flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OK.
Found Macronix flash chip "MX25L6405(D)" (8192 kB, SPI) on linux_spi.
Reading old flash chip contents... done.
Erasing and writing flash chip... FAILED at 0x00001000! Expected=0xff, Found=0x00, failed byte count from 0x00000000-0x0000ffff: 0xd716
ERASE FAILED!
Reading current flash chip contents... done. Looking for another erase function.
Erase/write done.
Verifying flash... VERIFIED.
</pre>
<p>
<a href="#pagetop">Back to top of page.</a>
</p>
</div>
<div class="section photos" id="paste">
<h1>Thermal paste (IMPORTANT)</h1>
<p>
Because part of this procedure involved removing the heatsink, you will need to apply new paste.
Arctic Silver 5 is ok. You will also need isopropyl alcohol and an anti-static cloth to clean with.
</p>
<p>
When re-installing the heatsink, you must first clean off all old paste with the alcohol/cloth.
Then apply new paste. AS5 is also much better than the default paste used on these machines.
</p>
<p>
<img src="images/t400/paste.jpg" alt="" />
</p>
</div>
<div class="section">
<h1 id="wifi">Wifi</h1>
<p>
The T500 typically comes with an Intel wifi chipset, which does not
work without proprietary software. For a list of wifi chipsets that
work without proprietary software, see
<a href="../hcl/index.html#recommended_wifi">../hcl/index.html#recommended_wifi</a>.
</p>
<p>
Some T500 laptops might come with an Atheros chipset, but this is 802.11g only.
</p>
<p>
It is recommended that you install a new wifi chipset. This can only
be done after installing libreboot, because the original firmware has
a whitelist of approved chips, and it will refuse to boot if you
use an 'unauthorized' wifi card.
</p>
<p>
The following photos show an Atheros AR5B95 being installed, to
replace the Intel chip that this T500 came with:<br/>
<img src="images/t400/0012.jpg" alt="" />
<img src="images/t400/ar5b95.jpg" alt="" />
</p>
</div>
<div class="section">
<h1 id="wwan">WWAN</h1>
<p>
If you have a WWAN/3G card and/or sim card reader, remove them permanently.
The WWAN-3G card has DMA, and proprietary firmware inside; the technology is
identical to what is used in mobile phones, so it can also track your movements.
</p>
<p>
Not to be confused with wifi (wifi is fine).
</p>
</div>
<div class="section photos">
<h1 id="memory">Memory</h1>
<p>
You need DDR3 SODIMM PC3-8500 RAM installed, in matching pairs
(speed/size). Non-matching pairs won't work. You can also install a
single module (meaning, one of the slots will be empty) in slot 0.
</p>
<p>
The following photo shows 8GiB (2x4GiB) of RAM installed:<br/>
<img src="images/t400/memory.jpg" alt="" />
</p>
</div>
<div class="section photos">
<h2>
Boot it!
</h2>
<p>
You should see something like this:
</p>
<p>
<img src="images/t500/0062.jpg" alt="" />
</p>
<p>
Now <a href="../gnulinux/index.html">install GNU/Linux</a>.
</p>
</div>
<div class="section">
<p>
Copyright © 2015 Francis Rowe <info@gluglug.org.uk><br/>
This document is released under the Creative Commons Attribution-ShareAlike 4.0 International Public License and all future versions.
A copy of the license can be found at <a href="../license.txt">../license.txt</a>.
</p>
<p>
This document is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See <a href="../license.txt">../license.txt</a> for more information.
</p>
</div>
</body>
</html>
|
