Missing bottoms

13 files changed, 25 insertions, 0 deletions

diff --git a/docs/bsd/freebsd.md b/docs/bsd/freebsd.md
index f056b5b8..b524fb8d 100644
--- a/docs/bsd/freebsd.md
+++ b/docs/bsd/freebsd.md
@@ -79,6 +79,7 @@ the bootable FreeBSD USB drive:
 Connect the USB drive. Check dmesg:
 
     $ dmesg
+
 Check lsblk to confirm which drive it is:
 
     $ lsblk
diff --git a/docs/bsd/netbsd.md b/docs/bsd/netbsd.md
index 0dceda38..3359690e 100644
--- a/docs/bsd/netbsd.md
+++ b/docs/bsd/netbsd.md
@@ -75,6 +75,7 @@ the bootable NetBSD USB drive:
 Connect the USB drive. Check dmesg:
 
     $ dmesg
+
 Check lsblk to confirm which drive it is:
 
     $ lsblk
diff --git a/docs/bsd/openbsd.md b/docs/bsd/openbsd.md
index 8906ff00..4a195adb 100644
--- a/docs/bsd/openbsd.md
+++ b/docs/bsd/openbsd.md
@@ -74,6 +74,7 @@ the bootable OpenBSD USB drive:
 Connect the USB drive. Check dmesg:
 
     $ dmesg
+
 Check lsblk to confirm which drive it is:
 
     $ lsblk
diff --git a/docs/git/index.md b/docs/git/index.md
index 81cb5dd3..eb8a0435 100644
--- a/docs/git/index.md
+++ b/docs/git/index.md
@@ -23,11 +23,13 @@ For Debian Stretch (may also work on Debian Jessie), you can run the
 following command:
 
     $ sudo ./oldbuild dependencies debian
+
 (this will also work in Devuan)
 
 For Parabola, you can run the following command:
 
     $ sudo ./oldbuild dependencies parabola\
+
 or:
     # ./oldbuild dependencies parabola
 
@@ -52,6 +54,7 @@ requirement is:
 
     $ git config --global user.name "Your Name"
     $ git config --global user.email your@emailaddress.com
+
 This is what will also appear in git logs if you ever commit your own
 changes to a given repository. For more information, see
 <http://git-scm.com/doc>.
@@ -206,12 +209,14 @@ modulename*. To see the possible values for *modulename*, use:
 After that, build the ROM images (for all boards):
 
     $ ./oldbuild roms withgrub
+
 Alternatively, you can build for a specific board or set of boards. For
 example:
 
     $ ./oldbuild roms withgrub x60
     $ ./oldbuild roms withgrub x200\_8mb
     $ ./oldbuild roms withgrub x60 x200\_8mb
+
 The list of board options can be found by looking at the directory names
 in **resources/libreboot/config/grub/**.
 
@@ -309,6 +314,7 @@ The command that you used for generating the release archives will also
 run the following command:
 
     $ ./oldbuild release tobuild
+
 The archive **tobuild.tar.xz** will have been created under
 **release/oldbuildsystem/**, containing bucts, flashrom and all other
 required resources for building them.
diff --git a/docs/gnulinux/configuring_parabola.md b/docs/gnulinux/configuring_parabola.md
index c6c1d6f4..a598f6f5 100644
--- a/docs/gnulinux/configuring_parabola.md
+++ b/docs/gnulinux/configuring_parabola.md
@@ -547,6 +547,7 @@ start lxde without lxdm. Read
 Open LXterminal:
 
     $ cp /etc/skel/.xinitrc \~
+
 Open .xinitrc and add the following plus a line break at the bottom of
 the file.\
 *\# Probably not needed. The same locale info that we set before\
diff --git a/docs/gnulinux/encrypted_parabola.md b/docs/gnulinux/encrypted_parabola.md
index f8b97fe8..37b36177 100644
--- a/docs/gnulinux/encrypted_parabola.md
+++ b/docs/gnulinux/encrypted_parabola.md
@@ -544,9 +544,11 @@ You can check if everything is in there (*grub.cfg* and *grubtest.cfg*
 would be really nice):
 
     $ ./cbfstool libreboot.rom print
+
 Extract grubtest.cfg:
 
     $ ./cbfstool libreboot.rom extract -n grubtest.cfg -f grubtest.cfg\
+
 And modify:
 
     $ vi grubtest.cfg
@@ -580,6 +582,7 @@ Save your changes in grubtest.cfg, then delete the unmodified config
 from the ROM image:
 
     $ ./cbfstool libreboot.rom remove -n grubtest.cfg
+
 and insert the modified grubtest.cfg:\
 \$ **./cbfstool libreboot.rom add -n grubtest.cfg -f grubtest.cfg -t
 raw**\
@@ -625,6 +628,7 @@ grub.cfg**\
 Delete the grub.cfg that remained inside the ROM:
 
     $ ./cbfstool libreboot.rom remove -n grub.cfg
+
 Add the modified version that you just made:
 
     $ ./cbfstool libreboot.rom add -n grub.cfg -f grub.cfg -t raw
diff --git a/docs/gnulinux/grub_boot_installer.md b/docs/gnulinux/grub_boot_installer.md
index c360a666..9d1147b3 100644
--- a/docs/gnulinux/grub_boot_installer.md
+++ b/docs/gnulinux/grub_boot_installer.md
@@ -66,6 +66,7 @@ how to create the bootable GNU+Linux USB drive:
 Connect the USB drive. Check dmesg:
 
     $ dmesg | tail
+
 Check to confirm which drive it is, for example, if you think its sd3:
 
     $ disklabel sd3
diff --git a/docs/gnulinux/grub_cbfs.md b/docs/gnulinux/grub_cbfs.md
index 223be4ee..624dec62 100644
--- a/docs/gnulinux/grub_cbfs.md
+++ b/docs/gnulinux/grub_cbfs.md
@@ -120,6 +120,7 @@ Extract grubtest.cfg from the ROM image {#extract_testconfig}
 You can check the contents of the ROM image, inside CBFS:
 
     $ cd \.../libreboot\_util/cbfstool** $ ./cbfstool libreboot.rom
+
 print**
 
 The files *grub.cfg* and *grubtest.cfg* should be present. grub.cfg is
@@ -152,6 +153,7 @@ Testing
 [../install/\#flashrom](../install/#flashrom) for information on how to
 flash it.
     $ cd /libreboot\_util** \# **./flash update libreboot.rom\
+
 Ocassionally, coreboot changes the name of a given board. If flashrom
 complains about a board mismatch, but you are sure that you chose the
 correct ROM image, then run this alternative command:
diff --git a/docs/gnulinux/grub_hardening.md b/docs/gnulinux/grub_hardening.md
index 12485949..31e4ccc8 100644
--- a/docs/gnulinux/grub_hardening.md
+++ b/docs/gnulinux/grub_hardening.md
@@ -33,6 +33,7 @@ Helpful links:
 
 -   [GRUB manual
     \#security](https://www.gnu.org/software/grub/manual/html_node/Security.html#Security)
+
 -   [GRUB info
     pages](http://git.savannah.gnu.org/cgit/grub.git/tree/docs/grub.texi)
 -   [SATA connected storage considered dangerous until proven
diff --git a/docs/grub/index.md b/docs/grub/index.md
index f148cc0f..43b53b4e 100644
--- a/docs/grub/index.md
+++ b/docs/grub/index.md
@@ -43,6 +43,7 @@ This is a free font that is also contained in GNU+Linux distributions
 like Debian, Devuan or Parabola.
 
     $ cd libreboot\_src/grub
+
 compile grub (the build scripts info on how to do this)\
 come back out into libreboot\_src/resources/grub:
 
@@ -71,6 +72,7 @@ Keymaps are stored in resources/utilities/grub-assemble/keymap/.
 Example (French Azerty):
 
     $ ckbcomp fr > frazerty
+
 \
 Go in grub directory:\
 **cat frazerty | ./grub/grub-mklayout -o frazerty.gkb**
diff --git a/docs/hardware/gm45_remove_me.md b/docs/hardware/gm45_remove_me.md
index b697d244..062fe545 100644
--- a/docs/hardware/gm45_remove_me.md
+++ b/docs/hardware/gm45_remove_me.md
@@ -72,6 +72,7 @@ generate a descriptor+gbe image with your own MAC address inside (with
 the Gbe checksum updated to match). Run:
 
     $ ./ich9gen --macaddress XX:XX:XX:XX:XX:XX
+
 (replace the XX chars with the hexadecimal chars in the MAC address that
 you want)
 
@@ -166,6 +167,7 @@ you ran **./oldbuild module all** or **./oldbuild module ich9deblob**
 from the main directory (./), otherwise you can build it like so:
 
     $ ./oldbuild module ich9deblob
+
 An executable file named **ich9deblob** will now appear under
 resources/utilities/ich9deblob/
 
diff --git a/docs/hardware/index.md b/docs/hardware/index.md
index 4863332e..f8096678 100644
--- a/docs/hardware/index.md
+++ b/docs/hardware/index.md
@@ -388,6 +388,7 @@ for whatever reason, since they include a lot of useful information.
 Backups created using wget:
 
     $ wget -m -p -E -k -K -np http://macbook.donderklumpen.de/
+
 **\$ wget -m -p -E -k -K -np
 http://macbook.donderklumpen.de/coreboot/**\
 Use **-e robots=off** if using this trick for other sites and the site
diff --git a/docs/misc/index.md b/docs/misc/index.md
index a3fdcd6f..216a8244 100644
--- a/docs/misc/index.md
+++ b/docs/misc/index.md
@@ -224,9 +224,11 @@ package i2c-tools.
 
     $ sudo modprobe i2c-dev
     $ sudo i2cdump -y 5 0x50 (you might have to change the value for
+
 -y)
 
     $ sudo rmmod i2c-dev
+
 You'll see the panel name in the output (from the EDID dump).
 
 If neither of these options work (or they are unavailable), physically