Fix/update/remove dead/broken links on the website and documentation

Thanks go to skollrc for pointing out these dead links, on this thread:
https://www.reddit.com/r/libreboot/comments/8pjjg5/some_dead_links_in_libreboot
_website/

12 files changed, 12 insertions, 18 deletions

diff --git a/docs/gnulinux/configuring_parabola.md b/docs/gnulinux/configuring_parabola.md
index 1e525f59..935ff099 100644
--- a/docs/gnulinux/configuring_parabola.md
+++ b/docs/gnulinux/configuring_parabola.md
@@ -63,7 +63,7 @@ For more information related to `pacman`, review the following articles on the A
 
 *    [Configuring pacman](https://wiki.parabolagnulinux.org/Installation_Guide#Configure_pacman)
 *    [Using pacman](https://wiki.archlinux.org/index.php/Pacman)
-*    [Additional Repositories](https://wiki.parabolagnulinux.org/Official_Repositories>)
+*    [Additional Repositories](https://wiki.parabolagnulinux.org/Official_Repositories)
 
 ## Updating Parabola
 Parabola is kept up-to-date, using `pacman`. When you are updating Parabola,
diff --git a/docs/gnulinux/encrypted_parabola.md b/docs/gnulinux/encrypted_parabola.md
index 74c74fce..48ef5b76 100644
--- a/docs/gnulinux/encrypted_parabola.md
+++ b/docs/gnulinux/encrypted_parabola.md
@@ -102,7 +102,7 @@ You can either fill the header with zeroes, or with random data; again, I chose
 Also, if you're using an SSD, there are a two things you should keep in mind:
 
 -    There are issues with TRIM; it's not enabled by default through LUKS,
-and there are security issues, if you do enable it. See [this page](https://wiki.archlinux.org/index.php/Dm-cryptSpecialties#Discard.2FTRIM_support_for_solid_state_drives_.28SSD.29) for more info.
+and there are security issues, if you do enable it. See [this page](https://wiki.archlinux.org/index.php/Dm-crypt#Specialties) for more info.
 -    Make sure to read [this article](https://wiki.archlinux.org/index.php/Solid_State_Drives),
 for information on managing SSD's in Arch Linux (the information applies to Parabola, as well).
 
@@ -381,7 +381,7 @@ for the LUKS passphrase, apply here as well. You will set this password with the
 
 ### Extra Security Tweaks
 There are some final changes that we can make to the installation, to make it
-significantly more secure; these are based on the [Security](https://wiki.archlinux.org/index.php/Securit) section of the Arch wiki.
+significantly more secure; these are based on the [Security](https://wiki.archlinux.org/index.php/Security) section of the Arch wiki.
 
 #### Key Strengthening
 We will want to open the configuration file for password settings, and increase
diff --git a/docs/gnulinux/grub_boot_installer.md b/docs/gnulinux/grub_boot_installer.md
index 7086b71d..7d4375e6 100644
--- a/docs/gnulinux/grub_boot_installer.md
+++ b/docs/gnulinux/grub_boot_installer.md
@@ -25,7 +25,7 @@ Overwrite the drive, writing your distro ISO to it with `dd`. For example, if we
 That's it! You should now be able to boot the installer from your USB drive (the instructions for doing so will be given later).
 
 ## Prepare the USB drive in NetBSD
-[This page](https://wiki.netbsd.org/tutorials how_to_install_netbsd_from_an_usb_memory_stick/) on the NetBSD website shows how to create a NetBSD bootable USB drive, from within NetBSD itself. You should the `dd` method documented there. This will work with any GNU+Linux ISO image.
+[This page](https://wiki.netbsd.org/tutorials/how_to_install_netbsd_from_an_usb_memory_stick/) on the NetBSD website shows how to create a NetBSD bootable USB drive, from within NetBSD itself. You should the `dd` method documented there. This will work with any GNU+Linux ISO image.
 
 ## Prepare the USB drive in FreeBSD
 [This page](https://www.freebsd.org/doc/handbook/bsdinstall-pre.html) on the FreeBSD website shows how to create a bootable USB drive for installing FreeBSD. Use the `dd` method documented. This will work with any GNU+Linux ISO image.
diff --git a/docs/hardware/gm45_remove_me.md b/docs/hardware/gm45_remove_me.md
index 0ac2f49b..26e5f9f6 100644
--- a/docs/hardware/gm45_remove_me.md
+++ b/docs/hardware/gm45_remove_me.md
@@ -418,7 +418,7 @@ region.
 
 According to the datasheet, it's supposed to add up to 0xBABA but can
 actually be others on the X200.
-<https://communities.intel.com/community/wired/blog/2010/10/14/how-to-basic-eeprom-checksums>
+<https://web.archive.org/web/20150912070329/https://communities.intel.com/community/wired/blog/2010/10/14/how-to-basic-eeprom-checksums>
 
 *"One of those engineers loves classic rock music, so they selected
 0xBABA"*
diff --git a/docs/hardware/x200.md b/docs/hardware/x200.md
index 10f5f621..fdf992d1 100644
--- a/docs/hardware/x200.md
+++ b/docs/hardware/x200.md
@@ -132,12 +132,6 @@ comparing it with X200 (factory BIOS) and X200 (gm45 raminit code in
 coreboot), to see what the differences are. Then tweak raminit code
 based on that.
 
-Trouble undocking (button doesn't work)
-----------------------------------------
-
-This person seems to have a workaround:
-<https://github.com/the-unconventional/libreboot-undock>
-
 LCD compatibility list {#lcd_supported_list}
 ----------------------
 
diff --git a/docs/install/index.md b/docs/install/index.md
index d4ac2f13..6cefad56 100644
--- a/docs/install/index.md
+++ b/docs/install/index.md
@@ -169,7 +169,7 @@ ASUS KCMA-D8?
 -------------
 
 If you have the proprietary BIOS, you need to flash libreboot
-externally. See [kcma-d8.md](kgpe-d8.md).
+externally. See [kcma-d8.md](kcma-d8.md).
 
 If you already have coreboot or libreboot installed, without write
 protection on the flash chip, then you can do it in software (otherwise,
diff --git a/docs/install/rpi_setup.md b/docs/install/rpi_setup.md
index e46191e7..b083aac9 100644
--- a/docs/install/rpi_setup.md
+++ b/docs/install/rpi_setup.md
@@ -150,7 +150,7 @@ successfully. If not, just flash again.
     Pi](http://scruss.com/blog/2013/02/02/simple-adc-with-the-raspberry-pi/)
 -   [Flashing coreboot on a T60 with a Raspberry Pi -
     the\_unconventional's
-    blog](https://blogs.fsfe.org/the_unconventional/2015/05/08/flashing-coreboot-on-a-t60-with-a-raspberry-pi/)
+    blog](https://web.archive.org/web/20150709043222/http://blogs.fsfe.org:80/the_unconventional/2015/05/08/coreboot-t60-raspberry-pi/)
 -   *Pomona SOIC Clip flashing*
     -   [Arch Linux Wiki - Installing Arch Linux on
         Chromebook](https://wiki.archlinux.org/index.php/Chromebook)
diff --git a/projects/ich9gen/sources/src/gbe/gbe.h b/projects/ich9gen/sources/src/gbe/gbe.h
index 14548e71..f28f4421 100644
--- a/projects/ich9gen/sources/src/gbe/gbe.h
+++ b/projects/ich9gen/sources/src/gbe/gbe.h
@@ -35,7 +35,7 @@
  *
  * Info about Gbe region (read whole datasheet):
  * http://www.intel.co.uk/content/dam/doc/application-note/i-o-controller-hub-9m-82567lf-lm-v-nvm-map-appl-note.pdf
- * https://communities.intel.com/community/wired/blog/2010/10/14/how-to-basic-eeprom-checksums
+ * https://web.archive.org/web/20150912070329/https://communities.intel.com/community/wired/blog/2010/10/14/how-to-basic-eeprom-checksums
  */
 
 #ifndef GBESTRUCT_H
diff --git a/projects/ich9gen/sources/src/ich9deblob.c b/projects/ich9gen/sources/src/ich9deblob.c
index b9153ed6..d7a57c51 100644
--- a/projects/ich9gen/sources/src/ich9deblob.c
+++ b/projects/ich9gen/sources/src/ich9deblob.c
@@ -42,7 +42,7 @@
  *
  * Info about Gbe region (read whole datasheet):
  * http://www.intel.co.uk/content/dam/doc/application-note/i-o-controller-hub-9m-82567lf-lm-v-nvm-map-appl-note.pdf
- * https://communities.intel.com/community/wired/blog/2010/10/14/how-to-basic-eeprom-checksums
+ * https://web.archive.org/web/20150912070329/https://communities.intel.com/community/wired/blog/2010/10/14/how-to-basic-eeprom-checksums
  */
 
 #include "ich9deblob.h"
diff --git a/resources/utilities/ich9deblob/src/gbe/gbe.h b/resources/utilities/ich9deblob/src/gbe/gbe.h
index a1350fdd..454ab2a2 100644
--- a/resources/utilities/ich9deblob/src/gbe/gbe.h
+++ b/resources/utilities/ich9deblob/src/gbe/gbe.h
@@ -35,7 +35,7 @@
  * 
  * Info about Gbe region (read whole datasheet):
  * http://www.intel.co.uk/content/dam/doc/application-note/i-o-controller-hub-9m-82567lf-lm-v-nvm-map-appl-note.pdf
- * https://communities.intel.com/community/wired/blog/2010/10/14/how-to-basic-eeprom-checksums
+ * https://web.archive.org/web/20150912070329/https://communities.intel.com/community/wired/blog/2010/10/14/how-to-basic-eeprom-checksums
  */
 
 #ifndef GBESTRUCT_H
diff --git a/resources/utilities/ich9deblob/src/ich9deblob.c b/resources/utilities/ich9deblob/src/ich9deblob.c
index d79a3a89..d0fc537a 100644
--- a/resources/utilities/ich9deblob/src/ich9deblob.c
+++ b/resources/utilities/ich9deblob/src/ich9deblob.c
@@ -42,7 +42,7 @@
  * 
  * Info about Gbe region (read whole datasheet):
  * http://www.intel.co.uk/content/dam/doc/application-note/i-o-controller-hub-9m-82567lf-lm-v-nvm-map-appl-note.pdf
- * https://communities.intel.com/community/wired/blog/2010/10/14/how-to-basic-eeprom-checksums
+ * https://web.archive.org/web/20150912070329/https://communities.intel.com/community/wired/blog/2010/10/14/how-to-basic-eeprom-checksums
  */
 
 #include "ich9deblob.h"
diff --git a/www/news/andrew-robbins-new-maintainer.md b/www/news/andrew-robbins-new-maintainer.md
index 50c43d3a..65fd8a3c 100644
--- a/www/news/andrew-robbins-new-maintainer.md
+++ b/www/news/andrew-robbins-new-maintainer.md
@@ -9,7 +9,7 @@ voted on by the maintainers with community input. These policies formalise our
 democratic standards.
 
 Today, we welcome Andrew Robbins (IRC nick `and_who` and
-[NotABug](https://notabug.org) user [kragle](https://notabug.org/kragle)) as
+[NotABug](https://notabug.org) user [and_who](https://notabug.org/and_who)) as
 our first new maintainer under the new policy. Going forward, Andrew will gain
 push access to Libreboot in order to review patches, as well as voting rights
 and IRC operator status.