Fix another class of code bug

17 files changed, 44 insertions, 44 deletions

diff --git a/docs/future/index.md b/docs/future/index.md
index d4d6f970..f882967a 100644
--- a/docs/future/index.md
+++ b/docs/future/index.md
@@ -160,8 +160,8 @@ How to dump EDID:
 
 \# **apt-get install i2c-tools**
     # modprobe i2c-dev
-Find out the correct ID to use:\
-\# **i2cdetect -l**\
+Find out the correct ID to use:
+    # i2cdetect -l\
 Example:\
 \# **i2cdump -y 2 0x50**
 
diff --git a/docs/git/index.md b/docs/git/index.md
index 963ff073..ef7b3174 100644
--- a/docs/git/index.md
+++ b/docs/git/index.md
@@ -36,10 +36,10 @@ following command:
     $ sudo ./oldbuild dependencies debian
 (this will also work in Devuan)
 
-For Parabola, you can run the following command:\
-\$ **sudo ./oldbuild dependencies parabola**\
-or:\
-\# **./oldbuild dependencies parabola**
+For Parabola, you can run the following command:
+    $ sudo ./oldbuild dependencies parabola\
+or:
+    # ./oldbuild dependencies parabola
 
 
 For other GNU+Linux distributions, you can adapt the existing scripts.
diff --git a/docs/gnulinux/configuring_parabola.md b/docs/gnulinux/configuring_parabola.md
index ba54dde1..12c05109 100644
--- a/docs/gnulinux/configuring_parabola.md
+++ b/docs/gnulinux/configuring_parabola.md
@@ -96,8 +96,8 @@ careful about this when reading anything on the Arch wiki.
 Some of these steps require internet access. I'll go into networking
 later but for now, I just connected my system to a switch and did:
     # systemctl start dhcpcd.service
-You can stop it later by running:\
-\# **systemctl stop dhcpcd.service**\
+You can stop it later by running:
+    # systemctl stop dhcpcd.service\
 For most people this should be enough, but if you don't have DHCP on
 your network then you should setup your network connection first:\
 [Setup network connection in Parabola](#network)
@@ -621,8 +621,8 @@ export LANG=en\_GB.UTF-8\
 \
 \# Start lxde desktop\
 exec startlxde\
-* Now make sure that it is executable:\
-\$ **chmod +x .xinitrc**
+* Now make sure that it is executable:
+    $ chmod +x .xinitrc
 
 [Back to top of page.](#pagetop)
 
diff --git a/docs/gnulinux/encrypted_debian.md b/docs/gnulinux/encrypted_debian.md
index b0f0b586..6dfb1435 100644
--- a/docs/gnulinux/encrypted_debian.md
+++ b/docs/gnulinux/encrypted_debian.md
@@ -200,8 +200,8 @@ ecryptfs
 If you didn't encrypt your home directory, then you can safely ignore
 this section.
 
-Immediately after logging in, do that:\
-\$ **sudo ecryptfs-unwrap-passphrase**
+Immediately after logging in, do that:
+    $ sudo ecryptfs-unwrap-passphrase
 
 This will be needed in the future if you ever need to recover your home
 directory from another system, so write it down and keep the note
diff --git a/docs/gnulinux/encrypted_parabola.md b/docs/gnulinux/encrypted_parabola.md
index f7faf575..f17fa10e 100644
--- a/docs/gnulinux/encrypted_parabola.md
+++ b/docs/gnulinux/encrypted_parabola.md
@@ -73,8 +73,8 @@ Securely wipe the drive:
 NOTE: If you have an SSD, only do this the first time. If it was already
 LUKS-encrypted before, use the info below to wipe the LUKS header. Also,
 check online for your SSD what the recommended erase block size is. For
-example if it was 2MiB:\
-\# **dd if=/dev/urandom of=/dev/sda bs=2M; sync**
+example if it was 2MiB:
+    # dd if=/dev/urandom of=/dev/sda bs=2M; sync
 
 If your drive was already LUKS encrypted (maybe you are re-installing
 your distro) then it is already 'wiped'. You should just wipe the LUKS
@@ -525,8 +525,8 @@ option at the end, with the name of your chosen chip is quotes.\
 You can check if everything is in there (*grub.cfg* and *grubtest.cfg*
 would be really nice):
     $ ./cbfstool libreboot.rom print
-Extract grubtest.cfg:\
-\$ **./cbfstool libreboot.rom extract -n grubtest.cfg -f grubtest.cfg**\
+Extract grubtest.cfg:
+    $ ./cbfstool libreboot.rom extract -n grubtest.cfg -f grubtest.cfg\
 And modify:\
 \$ **vi grubtest.cfg**
 
diff --git a/docs/gnulinux/grub_cbfs.md b/docs/gnulinux/grub_cbfs.md
index d15e70d5..24fd2108 100644
--- a/docs/gnulinux/grub_cbfs.md
+++ b/docs/gnulinux/grub_cbfs.md
@@ -122,8 +122,8 @@ Acquire the necessary utilities {#tools}
 Use ***cbfstool*** and ***flashrom***. There are available in the
 *libreboot\_util* release archive, or they can be compiled (see
 [../git/\#build\_flashrom](../git/#build_flashrom)). Flashrom is also
-available from the repositories:\
-\# **pacman -S flashrom**
+available from the repositories:
+    # pacman -S flashrom
 
 [Back to top of page.](#pagetop)
 
@@ -190,8 +190,8 @@ Testing
 
 **Now you have a modified ROM. Refer back to
 [../install/\#flashrom](../install/#flashrom) for information on how to
-flash it.\
-\$ **cd /libreboot\_util** \# **./flash update libreboot.rom**\
+flash it.
+    $ cd /libreboot\_util** \# **./flash update libreboot.rom\
 Ocassionally, coreboot changes the name of a given board. If flashrom
 complains about a board mismatch, but you are sure that you chose the
 correct ROM image, then run this alternative command:
diff --git a/docs/hcl/gm45_remove_me.md b/docs/hcl/gm45_remove_me.md
index 606c0b1f..2001a9c6 100644
--- a/docs/hcl/gm45_remove_me.md
+++ b/docs/hcl/gm45_remove_me.md
@@ -42,8 +42,8 @@ source with:
     $ ./oldbuild module ich9deblob
 The executable will appear under resources/utilities/ich9deblob/
 
-Run:\
-\$ **./ich9gen**
+Run:
+    $ ./ich9gen
 
 Running ich9gen this way (without any arguments) generates a default
 descriptor+gbe image with a generic MAC address. You probably don't
diff --git a/docs/install/bbb_setup.md b/docs/install/bbb_setup.md
index cb1a3d17..6fb4e045 100644
--- a/docs/install/bbb_setup.md
+++ b/docs/install/bbb_setup.md
@@ -162,8 +162,8 @@ Here are some example photos:\
 
 You can also connect the USB cable from the BBB to another computer and
 a new network interface will appear, with its own IP address. This is
-directly accessible from SSH, or screen:\
-\# **screen /dev/ttyACM0 115200**
+directly accessible from SSH, or screen:
+    # screen /dev/ttyACM0 115200
 
 You can also access the uboot console, using the serial method instead
 of SSH.
diff --git a/docs/install/c201.md b/docs/install/c201.md
index 28473cf7..517f5311 100644
--- a/docs/install/c201.md
+++ b/docs/install/c201.md
@@ -148,8 +148,8 @@ device (e.g. using the *root* account). In addition, the
 **cros-flash-replace** script has to be made executable:
     # chmod a+x cros-flash-replace
 
-The SPI flash has to be read first:\
-\# **flashrom -p host -r flash.img**\
+The SPI flash has to be read first:
+    # flashrom -p host -r flash.img\
 **Note: it might be a good idea to copy the produced flash.img file at
 this point and store it outside of the device for backup purposes.**
 
diff --git a/docs/install/d510mo.md b/docs/install/d510mo.md
index 39604c89..572e7224 100644
--- a/docs/install/d510mo.md
+++ b/docs/install/d510mo.md
@@ -9,8 +9,8 @@ motherboard while they still have the original BIOS present.
 Flash chip size {#flashchips}
 ===============
 
-Use this to find out:\
-\# **flashrom -p internal -V**
+Use this to find out:
+    # flashrom -p internal -V
 
 [Back to top of page.](#pagetop)
 
diff --git a/docs/install/ga-g41m-es2l.md b/docs/install/ga-g41m-es2l.md
index 75ec3dbd..c254d675 100644
--- a/docs/install/ga-g41m-es2l.md
+++ b/docs/install/ga-g41m-es2l.md
@@ -9,8 +9,8 @@ motherboard while they still have the original BIOS present.
 Flash chip size {#flashchips}
 ===============
 
-Use this to find out:\
-\# **flashrom -p internal -V**
+Use this to find out:
+    # flashrom -p internal -V
 
 [Back to top of page.](#pagetop)
 
diff --git a/docs/install/index.md b/docs/install/index.md
index 25a3ad96..fd8ed008 100644
--- a/docs/install/index.md
+++ b/docs/install/index.md
@@ -251,8 +251,8 @@ ROM image, and it should work.**
 Flash chip size
 ---------------
 
-Use this to find out:\
-\# **flashrom -p internal -V**
+Use this to find out:
+    # flashrom -p internal -V
 
 All good?
 ---------
@@ -271,8 +271,8 @@ appropriate executable. It is also possible for you to build these
 executables from the libreboot source code archives.
 
 
-How to update the flash chip contents:\
-\$ **sudo ./flash update [yourrom.rom](#rom)**
+How to update the flash chip contents:
+    $ sudo ./flash update [yourrom.rom](#rom)
 
 
 
diff --git a/docs/install/r400_external.md b/docs/install/r400_external.md
index f8f5123e..c568f18b 100644
--- a/docs/install/r400_external.md
+++ b/docs/install/r400_external.md
@@ -228,8 +228,8 @@ source code which can be built.
 Log in as root on your BBB, using the instructions in
 [bbb\_setup.html\#bbb\_access](bbb_setup.html#bbb_access).
 
-Test that flashrom works:\
-\# **./flashrom -p linux\_spi:dev=/dev/spidev1.0,spispeed=512**\
+Test that flashrom works:
+    # ./flashrom -p linux\_spi:dev=/dev/spidev1.0,spispeed=512\
 In this case, the output was:
 
     flashrom v0.9.7-r1854 on Linux 3.8.13-bone47 (armv7l)
diff --git a/docs/install/t400_external.md b/docs/install/t400_external.md
index e68f86c8..80868e00 100644
--- a/docs/install/t400_external.md
+++ b/docs/install/t400_external.md
@@ -75,8 +75,8 @@ See [\#paste](#paste).
 Flash chip size {#flashchips}
 ===============
 
-Use this to find out:\
-\# **flashrom -p internal -V**
+Use this to find out:
+    # flashrom -p internal -V
 
 [Back to top of page.](#pagetop)
 
diff --git a/docs/install/t500_external.md b/docs/install/t500_external.md
index 7aec3099..bccdc620 100644
--- a/docs/install/t500_external.md
+++ b/docs/install/t500_external.md
@@ -65,8 +65,8 @@ See [\#paste](#paste).
 Flash chip size {#flashchips}
 ===============
 
-Use this to find out:\
-\# **flashrom -p internal -V**
+Use this to find out:
+    # flashrom -p internal -V
 
 [Back to top of page.](#pagetop)
 
diff --git a/docs/install/x200_external.md b/docs/install/x200_external.md
index da4aa6a6..2aa70cc5 100644
--- a/docs/install/x200_external.md
+++ b/docs/install/x200_external.md
@@ -33,8 +33,8 @@ Check the [suppliers](../../suppliers) page for more information.
 Flash chip size {#flashchips}
 ===============
 
-Use this to find out:\
-\# **flashrom -p internal -V**
+Use this to find out:
+    # flashrom -p internal -V
 
 The X200S and X200 Tablet will use a WSON-8 flash chip, on the bottom of
 the motherboard (this requires removal of the motherboard). **Not all
diff --git a/docs/misc/index.md b/docs/misc/index.md
index f392bdd4..59679ab0 100644
--- a/docs/misc/index.md
+++ b/docs/misc/index.md
@@ -231,8 +231,8 @@ Disable or enable beeps when removing/adding the charger:
     $ sudo ./nvramtool -w power\_management\_beeps=Enable
 \$ **sudo ./nvramtool -w power\_management\_beeps=Disable**
 
-Disable or enable beeps when battery is low:\
-\$ **sudo ./nvramtool -w low\_battery\_beep=Enable**\
+Disable or enable beeps when battery is low:
+    $ sudo ./nvramtool -w low\_battery\_beep=Enable\
 \$ **sudo ./nvramtool -w low\_battery\_beep=Disable**
 
 A reboot is required, for these changes to take effect.