Fix yet another class of codeblock bugs -- Leah really has no consitency..

3 files changed, 30 insertions, 30 deletions

diff --git a/docs/bsd/freebsd.md b/docs/bsd/freebsd.md
index fa7c8167..9f0d58e0 100644
--- a/docs/bsd/freebsd.md
+++ b/docs/bsd/freebsd.md
@@ -60,17 +60,17 @@ If you downloaded your ISO on a LibertyBSD or OpenBSD system, here is
 how to create the bootable FreeBSD USB drive:
 
 Connect the USB drive. Check dmesg:\
-**\$ dmesg | tail**\
+    $ dmesg | tail
 Check to confirm which drive it is, for example, if you think its sd3:\
-**\$ disklabel sd3**
+    $ disklabel sd3
 
 Check that it wasn't automatically mounted. If it was, unmount it. For
 example:\
-**\$ doas umount /dev/sd3i**\
+    $ doas umount /dev/sd3i
 
 dmesg told you what device it is. Overwrite the drive, writing the
 FreeBSD installer to it with dd. For example:\
-**\$ doas dd if=freebsd.img of=/dev/rsdXc bs=1M; sync**\
+    $ doas dd if=freebsd.img of=/dev/rsdXc bs=1M; sync
 
 You should now be able to boot the installer from your USB drive.
 Continue reading, for information about how to do that.
@@ -84,19 +84,19 @@ If you downloaded your ISO on a GNU+Linux system, here is how to create
 the bootable FreeBSD USB drive:
 
 Connect the USB drive. Check dmesg:\
-**\$ dmesg**\
+    $ dmesg
 Check lsblk to confirm which drive it is:\
-**\$ lsblk**
+    $ lsblk
 
 Check that it wasn't automatically mounted. If it was, unmount it. For
 example:\
-**\$ sudo umount /dev/sdX\***\
-**\# umount /dev/sdX\***
+    $ sudo umount /dev/sdX\*
+    # umount /dev/sdX\*
 
 dmesg told you what device it is. Overwrite the drive, writing your
 distro ISO to it with dd. For example:\
-**\$ sudo dd if=freebsd.img of=/dev/sdX bs=8M; sync**\
-**\# dd if=freebsd.img of=/dev/sdX bs=8M; sync**
+    $ sudo dd if=freebsd.img of=/dev/sdX bs=8M; sync
+    # dd if=freebsd.img of=/dev/sdX bs=8M; sync
 
 You should now be able to boot the installer from your USB drive.
 Continue reading, for information about how to do that.
diff --git a/docs/bsd/netbsd.md b/docs/bsd/netbsd.md
index 286d9495..ff515c40 100644
--- a/docs/bsd/netbsd.md
+++ b/docs/bsd/netbsd.md
@@ -56,17 +56,17 @@ If you downloaded your ISO on a LibertyBSD or NetBSD system, here is how
 to create the bootable NetBSD USB drive:
 
 Connect the USB drive. Check dmesg:\
-**\$ dmesg | tail**\
+    $ dmesg | tail
 Check to confirm which drive it is, for example, if you think its sd3:\
-**\$ disklabel sd3**
+    $ disklabel sd3
 
 Check that it wasn't automatically mounted. If it was, unmount it. For
 example:\
-**\$ doas umount /dev/sd3i**\
+    $ doas umount /dev/sd3i
 
 dmesg told you what device it is. Overwrite the drive, writing the
 NetBSD installer to it with dd. For example:\
-**\$ doas netbsd.iso of=/dev/rsdXc bs=1M; sync**\
+    $ doas netbsd.iso of=/dev/rsdXc bs=1M; sync
 
 You should now be able to boot the installer from your USB drive.
 Continue reading, for information about how to do that.
@@ -80,19 +80,19 @@ If you downloaded your ISO on a GNU+Linux system, here is how to create
 the bootable NetBSD USB drive:
 
 Connect the USB drive. Check dmesg:\
-**\$ dmesg**\
+    $ dmesg
 Check lsblk to confirm which drive it is:\
-**\$ lsblk**
+    $ lsblk
 
 Check that it wasn't automatically mounted. If it was, unmount it. For
 example:\
-**\$ sudo umount /dev/sdX\***\
-**\# umount /dev/sdX\***
+    $ sudo umount /dev/sdX\*
+    # umount /dev/sdX\*
 
 dmesg told you what device it is. Overwrite the drive, writing your
 distro ISO to it with dd. For example:\
-**\$ sudo dd if=install60.fs of=/dev/sdX bs=8M; sync**\
-**\# dd if=netbsd.iso of=/dev/sdX bs=8M; sync**
+    $ sudo dd if=install60.fs of=/dev/sdX bs=8M; sync
+    # dd if=netbsd.iso of=/dev/sdX bs=8M; sync
 
 You should now be able to boot the installer from your USB drive.
 Continue reading, for information about how to do that.
diff --git a/docs/bsd/openbsd.md b/docs/bsd/openbsd.md
index 988b87e6..4a7027d3 100644
--- a/docs/bsd/openbsd.md
+++ b/docs/bsd/openbsd.md
@@ -38,17 +38,17 @@ If you downloaded your ISO on a LibertyBSD or OpenBSD system, here is
 how to create the bootable LibertyBSD/OpenBSD USB drive:
 
 Connect the USB drive. Check dmesg:\
-**\$ dmesg | tail**\
+    $ dmesg | tail
 Check to confirm which drive it is, for example, if you think its sd3:\
-**\$ disklabel sd3**
+    $ disklabel sd3
 
 Check that it wasn't automatically mounted. If it was, unmount it. For
 example:\
-**\$ doas umount /dev/sd3i**\
+    $ doas umount /dev/sd3i
 
 dmesg told you what device it is. Overwrite the drive, writing the
 OpenBSD installer to it with dd. For example:\
-**\$ doas dd if=install60.fs of=/dev/rsdXc bs=1M; sync**\
+    $ doas dd if=install60.fs of=/dev/rsdXc bs=1M; sync
 
 You should now be able to boot the installer from your USB drive.
 Continue reading, for information about how to do that.
@@ -79,19 +79,19 @@ If you downloaded your ISO on a GNU+Linux system, here is how to create
 the bootable OpenBSD USB drive:
 
 Connect the USB drive. Check dmesg:\
-**\$ dmesg**\
+    $ dmesg
 Check lsblk to confirm which drive it is:\
-**\$ lsblk**
+    $ lsblk
 
 Check that it wasn't automatically mounted. If it was, unmount it. For
 example:\
-**\$ sudo umount /dev/sdX\***\
-**\# umount /dev/sdX\***
+    $ sudo umount /dev/sdX\*
+    # umount /dev/sdX\*
 
 dmesg told you what device it is. Overwrite the drive, writing your
 distro ISO to it with dd. For example:\
-**\$ sudo dd if=install60.fs of=/dev/sdX bs=8M; sync**\
-**\# dd if=install60.fs of=/dev/sdX bs=8M; sync**
+    $ sudo dd if=install60.fs of=/dev/sdX bs=8M; sync
+    # dd if=install60.fs of=/dev/sdX bs=8M; sync
 
 You should now be able to boot the installer from your USB drive.
 Continue reading, for information about how to do that.