docs/git/index.html: GRUB-payload configs get their own section

1 files changed, 460 insertions, 444 deletions

diff --git a/docs/git/index.html b/docs/git/index.html
index f4d2f2ca..620af0c9 100644
--- a/docs/git/index.html
+++ b/docs/git/index.html
@@ -31,16 +31,21 @@
 					<a href="#config">Configuring libreboot</a>
 					<ul>
 						<li><a href="#config_dmidecode">dmidecode</a></li>
-						<li><a href="#config_kfsn4-dre">ASUS KFSN4-DRE</a></li>
-						<li><a href="#config_x60">ThinkPad X60, X60S and X60 Tablet</a></li>
-						<li><a href="#config_t60">ThinkPad T60</a></li>
-						<li><a href="#config_x200">ThinkPad X200</a></li>
-						<li><a href="#config_r400">ThinkPad R400</a></li>
-						<li><a href="#config_t400">ThinkPad T400</a></li>
-						<li><a href="#config_t500">ThinkPad T500</a></li>
-						<li><a href="#config_macbook21">MacBook2,1</a></li>
-						<li><a href="#config_qemu_i440fx_piix4">QEMU (x86 i440fx/piix4)</a></li>
-						<li><a href="#config_qemu_q35_ich9">QEMU (x86 q35/ich9)</a></li>
+						<li>
+							<a href="#configgrub">GRUB payload</a>
+							<ul>
+								<li><a href="#config_kfsn4-dre">ASUS KFSN4-DRE</a></li>
+								<li><a href="#config_x60">ThinkPad X60, X60S and X60 Tablet</a></li>
+								<li><a href="#config_t60">ThinkPad T60</a></li>
+								<li><a href="#config_x200">ThinkPad X200</a></li>
+								<li><a href="#config_r400">ThinkPad R400</a></li>
+								<li><a href="#config_t400">ThinkPad T400</a></li>
+								<li><a href="#config_t500">ThinkPad T500</a></li>
+								<li><a href="#config_macbook21">MacBook2,1</a></li>
+								<li><a href="#config_qemu_i440fx_piix4">QEMU (x86 i440fx/piix4)</a></li>
+								<li><a href="#config_qemu_q35_ich9">QEMU (x86 q35/ich9)</a></li>
+							</ul>
+						</li>
 					</ul>
 				</li>
 				<li><a href="#build">How to build the ROM images</a></li>
@@ -287,13 +292,8 @@
 				If you've already built a kernel before, you know how to use this interface.
 			</p>
 
-			<p>
-				Configurations are then saved as files called <b>&quot;.config&quot;</b>. Copies of each configuration used
-				for each system type by the libreboot build scripts are stored in resources/libreboot/config/grub/
-			</p>
-
 			<div class="subsection">
-				<h3 id="config_dmidecode">
+				<h2 id="config_dmidecode">
 					dmidecode
 				</h2>
 					<p>
@@ -316,442 +316,458 @@
 						with the original BIOS or firmware. <b>libreboot has already done this for you. This information is for reference,
 						in the hope that it will be useful.</b>
 					</p>
-			</div>
-
-			<div class="subsection">
-				<h3 id="config_kfsn4-dre">
-					ASUS KFSN4-DRE configuration (file: resources/libreboot/config/grub/kfsn4-dre/config)
-				</h3>
-					<ul>
-						<li>General setup / Expert mode = <i>enable</i></li>
-						<li>General / Use CMOS for configuration values = <i>enable</i></li>
-						<li>Mainboard / Mainboard vendor = <i>ASUS</i></li>
-						<li>Mainboard / Mainboard model = <i>KFSN4-DRE</i></li>
-						<li>Mainboard / ROM chip size = <i>1024 KB (1 MB)</i></li>
-						<li>Chipset / Include CPU microcode in CBFS = <i>Do not include microcode updates</i></li>
-						<li>Devices / Use native graphics initialization = <i>enable</i></li>
-						<li>
-							Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer)
-							<ul>
-								<li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time
-								to enable coreboot framebuffer for a separate set of ROM images, in each system.</li>
-							</ul>
-						</li>
-						<li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li>
-						<li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li>
-						<li>Generic Drivers / Type of dongle = <i>Net20DC or compatible</i></li>
-						<li>Generic Drivers / Digitizer = <i>Present</i></li>
-						
-						<li>Console / USB dongle console output = <i>enable</i></li>
-						<li>Payload / Add a payload = <i>An ELF executable payload</i></li>
-						<li>Payload / Payload path and filename = <i>grub.elf</i></li>
-					</ul>
 					<p>
-						Now go back into Devices:
-					</p>
-					<ul>
-						<li>Devices / Run VGA Option ROMs = <i>disable</i></li>
-						<li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li>
-					</ul>
-					<p>
-						The resulting .config file was saved as resources/libreboot/config/<b>grub/kfsn4-dre/config</b> and is used by the build
-						scripts for this system.
+						In practise, this information is useless and you can
+						just leave it on the defaults that coreboot uses (this
+						is what libreboot does, on most boards).
 					</p>
 			</div>
 
-			<div class="subsection">
-				<h3 id="config_x60">
-					ThinkPad X60, X60S and X60 Tablet configuration (file: resources/libreboot/config/grub/x60/config)
-				</h3>
-					<ul>
-						<li>General setup / Expert mode = <i>enable</i></li>
-						<li>General / Use CMOS for configuration values = <i>enable</i></li>
-						
-						<li>Mainboard / Mainboard vendor = <i>Lenovo</i></li>
-						<li>Mainboard / Mainboard model = <i>ThinkPad X60 / X60s / X60t</i></li>
-						<li>Mainboard / ROM chip size = <i>2048 KB (2 MB)</i></li>
-						<li>Chipset / Include CPU microcode in CBFS = <i>Do not include microcode updates</i></li>
-						<li>Devices / Use native graphics initialization = <i>enable</i></li>
-						<li>
-							Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer)
-							<ul>
-								<li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time
-								to enable coreboot framebuffer for a separate set of ROM images, in each system.</li>
-							</ul>
-						</li>
-						<li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li>
-						<li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li>
-						<li>Generic Drivers / Type of dongle = <i>Net20DC or compatible</i></li>
-						<li>Generic Drivers / Digitizer = <i>Present</i></li>
-						
-						<li>Console / USB dongle console output = <i>enable</i></li>
-						<li>Payload / Add a payload = <i>An ELF executable payload</i></li>
-						<li>Payload / Payload path and filename = <i>grub.elf</i></li>
-					</ul>
-					<p>
-						Now go back into Devices:
-					</p>
-					<ul>
-						<li>Devices / Run VGA Option ROMs = <i>disable</i></li>
-						<li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li>
-					</ul>
-					<p>
-						The resulting .config file was saved as resources/libreboot/config/<b>grub/x60/config</b> and is used by the build
-						scripts for this system.
-					</p>
-					<p>
-						This configuration is used on all variants: X60, X60S and X60 Tablet.
-					</p>
-			</div>
+			<h2 id="configgrub">GRUB payload</h2>
 
-			<div class="subsection">
-				<h3 id="config_t60">
-					ThinkPad T60 configuration (file: resources/libreboot/config/grub/t60/config)
-				</h3>
-					<ul>
-						<li>General setup / Expert mode = <i>enable</i></li>
-						<li>General setup / Local version string = <i>79ETE7WW (2.27 )</i></li>
-						<li>General / Use CMOS for configuration values = <i>enable</i></li>
-						
-						<li>Mainboard / Mainboard vendor = <i>Lenovo</i></li>
-						<li>Mainboard / Mainboard model = <i>ThinkPad T60 / T60p</i></li>
-						<li>Mainboard / ROM chip size = <i>2048 KB (2 MB)</i></li>
-						<li>System tables / SMBIOS Serial Number = <i>L3DKE06</i></li>
-						<li>System tables / SMBIOS Version Number = <i>ThinkPad T60</i></li>
-						<li>System tables / SMBIOS Manufacturer = <i>LENOVO</i></li>
-						<li>System tables / SMBIOS Product name = <i>1951FEG</i></li>
-						<li>Chipset / Include CPU microcode in CBFS = <i>Do not include microcode updates</i></li>
-						<li>Devices / Use native graphics initialization = <i>enable</i></li>
-						<li>
-							Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer)
-							<ul>
-								<li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time
-								to enable coreboot framebuffer for a separate set of ROM images, in each system.</li>
-							</ul>
-						</li>
-						<li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li>
-						<li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li>
-						<li>Generic Drivers / Type of dongle = <i>Net20DC or compatible</i></li>
-						
-						<li>Console / USB dongle console output = <i>enable</i></li>
-						<li>Payload / Add a payload = <i>An ELF executable payload</i></li>
-						<li>Payload / Payload path and filename = <i>grub.elf</i></li>
-					</ul>
-					<p>
-						Go back into Devices:
-					</p>
-					<ul>
-						<li>Devices / Run VGA Option ROMs = <i>disable</i></li>
-						<li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li>
-					</ul>
-					<p>
-						The resulting .config file was saved as resources/libreboot/config/<b>grub/t60/config</b> and is used by the build
-						scripts for this system.
-					</p>	
-					<p>
-						It is believed that the motherboards on 14.1&quot; and 15.1&quot; T60s are the same, so the same configuration is used
-						on both the 14.1&quot; and 15.1&quot; T60s.
-					</p>
-			</div>
-				
-			<div class="subsection">
-				<h3 id="config_x200">
-					ThinkPad X200 configuration (file: resources/libreboot/config/grub/x200_4mb/config and resources/libreboot/config/grub/x200_8mb/config)
-				</h3>
-					<p>
-						These are saved as two configs, because there are 2 size flash chips: 4MB or 8MB. 
-					</p>
-					<ul>
-						<li>General / Expert mode = <i>enable</i></li>
-						<li>General / Use CMOS for configuration values = <i>enable</i></li>
-						
-						<li>Mainboard / Mainboard vendor = <i>Lenovo</i></li>
-						<li>Mainboard / Mainboard model = <i>ThinkPad X200</i></li>
-						<li>Mainboard / ROM chip size = <i>4096 KB (4 MB)</i> or <i>8192 KB (8 MB)</i> depending on flash chip size</li>
-						<li>Chipset / Include CPU microcode in CBFS = <i>Do not include microcode updates</i></li>
-						<li>Chipset / Size of CBFS filesystem in ROM = byte size <i>0x7FD000</i> (for 8MB flash chip) or <i>3FD000</i> (for 4MB flash chip)</li>
-						<li>Devices / Use native graphics initialization = <i>enable</i></li>
-						<li>
-							Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer)
-							<ul>
-								<li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time
-								to enable coreboot framebuffer for a separate set of ROM images, in each system.</li>
-							</ul>
-						</li>
-						<li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li>
-						<li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li>
-						<li>Generic Drivers / Type of dongle = <i>Net20DC or compatible</i></li>
-						<li>Generic Drivers / Digitizer = <i>Present</i></li>
-						
-						<li>Console / USB dongle console output = <i>enable</i></li>
-						<li>Payload / Add a payload = <i>An ELF executable payload</i></li>
-						<li>Payload / Payload path and filename = <i>grub.elf</i></li>
-					</ul>
-					<p>
-						Go back and disable option ROMs:
-					</p>
-					<ul>
-						<li>Devices / Run VGA Option ROMs = <i>disable</i></li>
-						<li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li>
-					</ul>
-					<p>
-						The resulting .config file was saved as resources/libreboot/config/<b>grub/x200_8mb/config</b> and
-						resources/libreboot/config/<b>grub/x200_4mb/config</b> and is used by the build
-						scripts for this system.
-					</p>
-			</div>
-			
-			<div class="subsection">
-				<h3 id="config_r400">
-					ThinkPad R400 configuration (file: resources/libreboot/config/grub/r400_4mb/config and resources/libreboot/config/grub/r400_8mb/config)
-				</h3>
-					<p>
-						These are saved as two configs, because there are 2 size flash chips: 4MB or 8MB. 
-					</p>
-					<ul>
-						<li>General / Expert mode = <i>enable</i></li>
-						<li>General / Use CMOS for configuration values = <i>enable</i></li>
-						
-						<li>Mainboard / Mainboard vendor = <i>Lenovo</i></li>
-						<li>Mainboard / Mainboard model = <i>ThinkPad R400</i></li>
-						<li>Mainboard / ROM chip size = <i>4096 KB (4 MB)</i> or <i>8192 KB (8 MB)</i> depending on flash chip size</li>
-						<li>Chipset / Include CPU microcode in CBFS = <i>Do not include microcode updates</i></li>
-						<li>Chipset / Size of CBFS filesystem in ROM = byte size <i>0x7FD000</i> (for 8MB flash chip) or <i>3FD000</i> (for 4MB flash chip)</li>
-						<li>Devices / Use native graphics initialization = <i>enable</i></li>
-						<li>
-							Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer)
-							<ul>
-								<li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time
-								to enable coreboot framebuffer for a separate set of ROM images, in each system.</li>
-							</ul>
-						</li>
-						<li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li>
-						<li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li>
-						<li>Generic Drivers / Type of dongle = <i>Net20DC or compatible</i></li>
-						
-						<li>Console / USB dongle console output = <i>enable</i></li>
-						<li>Payload / Add a payload = <i>An ELF executable payload</i></li>
-						<li>Payload / Payload path and filename = <i>grub.elf</i></li>
-					</ul>
-					<p>
-						Go back and disable option ROMs:
-					</p>
-					<ul>
-						<li>Devices / Run VGA Option ROMs = <i>disable</i></li>
-						<li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li>
-					</ul>
-					<p>
-						The resulting .config file was saved as resources/libreboot/config/<b>grub/r400_8mb/config</b> and
-						resources/libreboot/config/<b>grub/r400_4mb/config</b> and is used by the build
-						scripts for this system.
-					</p>
-			</div>
-			
-			<div class="subsection">
-				<h3 id="config_t400">
-					ThinkPad T400 configuration (file: resources/libreboot/config/grub/t400_4mb/config and resources/libreboot/config/grub/t400_8mb/config)
-				</h3>
-					<p>
-						These are saved as two configs, because there are 2 size flash chips: 4MB or 8MB. 
-					</p>
-					<ul>
-						<li>General / Expert mode = <i>enable</i></li>
-						<li>General / Use CMOS for configuration values = <i>enable</i></li>
-						
-						<li>Mainboard / Mainboard vendor = <i>Lenovo</i></li>
-						<li>Mainboard / Mainboard model = <i>ThinkPad T400</i></li>
-						<li>Mainboard / ROM chip size = <i>4096 KB (4 MB)</i> or <i>8192 KB (8 MB)</i> depending on flash chip size</li>
-						<li>Chipset / Include CPU microcode in CBFS = <i>Do not include microcode updates</i></li>
-						<li>Chipset / Size of CBFS filesystem in ROM = byte size <i>0x7FD000</i> (for 8MB flash chip) or <i>3FD000</i> (for 4MB flash chip)</li>
-						<li>Devices / Use native graphics initialization = <i>enable</i></li>
-						<li>
-							Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer)
-							<ul>
-								<li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time
-								to enable coreboot framebuffer for a separate set of ROM images, in each system.</li>
-							</ul>
-						</li>
-						<li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li>
-						<li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li>
-						<li>Generic Drivers / Type of dongle = <i>Net20DC or compatible</i></li>
-						
-						<li>Console / USB dongle console output = <i>enable</i></li>
-						<li>Payload / Add a payload = <i>An ELF executable payload</i></li>
-						<li>Payload / Payload path and filename = <i>grub.elf</i></li>
-					</ul>
-					<p>
-						Go back and disable option ROMs:
-					</p>
-					<ul>
-						<li>Devices / Run VGA Option ROMs = <i>disable</i></li>
-						<li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li>
-					</ul>
-					<p>
-						The resulting .config file was saved as resources/libreboot/config/<b>grub/t400_8mb/config</b> and
-						resources/libreboot/config/<b>grub/t400_4mb/config</b> and is used by the build
-						scripts for this system.
-					</p>
-			</div>
-			
-			<div class="subsection">
-				<h3 id="config_t500">
-					ThinkPad T500 configuration (file: resources/libreboot/config/grub/t500_4mb/config and resources/libreboot/config/grub/t500_8mb/config)
-				</h3>
-					<p>
-						These are saved as two configs, because there are 2 size flash chips: 4MB or 8MB. 
-					</p>
-					<ul>
-						<li>General / Expert mode = <i>enable</i></li>
-						<li>General / Use CMOS for configuration values = <i>enable</i></li>
-						
-						<li>Mainboard / Mainboard vendor = <i>Lenovo</i></li>
-						<li>Mainboard / Mainboard model = <i>ThinkPad T500</i></li>
-						<li>Mainboard / ROM chip size = <i>4096 KB (4 MB)</i> or <i>8192 KB (8 MB)</i> depending on flash chip size</li>
-						<li>Chipset / Include CPU microcode in CBFS = <i>Do not include microcode updates</i></li>
-						<li>Chipset / Size of CBFS filesystem in ROM = byte size <i>0x7FD000</i> (for 8MB flash chip) or <i>3FD000</i> (for 4MB flash chip)</li>
-						<li>Devices / Use native graphics initialization = <i>enable</i></li>
-						<li>
-							Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer)
-							<ul>
-								<li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time
-								to enable coreboot framebuffer for a separate set of ROM images, in each system.</li>
-							</ul>
-						</li>
-						<li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li>
-						<li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li>
-						<li>Generic Drivers / Type of dongle = <i>Net20DC or compatible</i></li>
-						
-						<li>Console / USB dongle console output = <i>enable</i></li>
-						<li>Payload / Add a payload = <i>An ELF executable payload</i></li>
-						<li>Payload / Payload path and filename = <i>grub.elf</i></li>
-					</ul>
-					<p>
-						Go back and disable option ROMs:
-					</p>
-					<ul>
-						<li>Devices / Run VGA Option ROMs = <i>disable</i></li>
-						<li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li>
-					</ul>
-					<p>
-						The resulting .config file was saved as resources/libreboot/config/<b>grub/t500_8mb/config</b> and
-						resources/libreboot/config/<b>grub/t500_4mb/config</b> and is used by the build
-						scripts for this system.
-					</p>
-			</div>
+				<p>
+					GRUB is one of the payloads that libreboot targets.
+				</p>
 
-			<div class="subsection">
-				<h3 id="config_macbook21">
-					MacBook2,1 configuration (file: resources/libreboot/config/grub/macbook21/config)
-				</h3>
-					<ul>
-						<li>General / Expert mode = <i>enable</i></li>
-						<li>General / Local version string = <i>&quot;&nbsp;&nbsp;&nbsp;&nbsp;MB21.88Z.00A5.B07.0706270922&quot;</i> (without the quotes)</li>
-						<li>General / Use CMOS for configuration values = <i>enable</i></li>
-						
-						<li>Mainboard / Mainboard vendor = <i>Apple</i></li>
-						<li>Mainboard / Mainboard model = <i>Macbook2,1 ICH7 TESTING</i></li>
-						<li>Mainboard / ROM chip size = <i>2048 KB (2 MB)</i></li>
-						<li>System tables / SMBIOS Serial Number = <i>W8724XXXXXX</i></li>
-						<li>System tables / SMBIOS Version Number = <i>1.0</i></li>
-						<li>System tables / SMBIOS Manufacturer = <i>Apple Inc.</i></li>
-						<li>System tables / SMBIOS Product Name = <i>MacBook2,1</i></li>
-						<li>Chipset / Include CPU microcode in CBFS = <i>Do not include microcode updates</i></li>
-						<li>Devices / Use native graphics initialization = <i>enable</i></li>
-						<li>
-							Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer)
-							<ul>
-								<li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time
-								to enable coreboot framebuffer for a separate set of ROM images, in each system.</li>
-							</ul>
-						</li>
-						<li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li>
-						<li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li>
-						<li>Generic Drivers / Type of dongle = <i></i></li>
-						
-						<li>Console / USB dongle console output = <i>enable</i></li>
-						<li>Payload / Add a payload = <i>An ELF executable payload</i></li>
-						<li>Payload / Payload path and filename = <i>grub.elf</i></li>
-					</ul>
-					<p>
-						Go back and disable option ROMs:
-					</p>
-					<ul>
-						<li>Devices / Run VGA Option ROMs = <i>disable</i></li>
-						<li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li>
-					</ul>
-					<p>
-						The resulting .config file was saved as resources/libreboot/config/<b>grub/macbook21/config</b> and is used by the build
-						scripts for this system. <b>This config is also used for the MacBook1,1</b>.
-					</p>
-			</div>
+				<p>
+					Configurations are then saved as files called <b>&quot;.config&quot;</b>. Copies of each configuration used
+					for each system type by the libreboot build scripts are stored in resources/libreboot/config/grub/
+				</p>
+
+				<div class="subsection">
+					<h3 id="config_kfsn4-dre">
+						ASUS KFSN4-DRE configuration (file: resources/libreboot/config/grub/kfsn4-dre/config)
+					</h3>
+						<ul>
+							<li>General setup / Expert mode = <i>enable</i></li>
+							<li>General / Use CMOS for configuration values = <i>enable</i></li>
+							<li>Mainboard / Mainboard vendor = <i>ASUS</i></li>
+							<li>Mainboard / Mainboard model = <i>KFSN4-DRE</i></li>
+							<li>Mainboard / ROM chip size = <i>1024 KB (1 MB)</i></li>
+							<li>Chipset / Include CPU microcode in CBFS = <i>Do not include microcode updates</i></li>
+							<li>Devices / Use native graphics initialization = <i>enable</i></li>
+							<li>
+								Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer)
+								<ul>
+									<li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time
+									to enable coreboot framebuffer for a separate set of ROM images, in each system.</li>
+								</ul>
+							</li>
+							<li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li>
+							<li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li>
+							<li>Generic Drivers / Type of dongle = <i>Net20DC or compatible</i></li>
+							<li>Generic Drivers / Digitizer = <i>Present</i></li>
+							
+							<li>Console / USB dongle console output = <i>enable</i></li>
+							<li>Payload / Add a payload = <i>An ELF executable payload</i></li>
+							<li>Payload / Payload path and filename = <i>grub.elf</i></li>
+						</ul>
+						<p>
+							Now go back into Devices:
+						</p>
+						<ul>
+							<li>Devices / Run VGA Option ROMs = <i>disable</i></li>
+							<li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li>
+						</ul>
+						<p>
+							The resulting .config file was saved as resources/libreboot/config/<b>grub/kfsn4-dre/config</b> and is used by the build
+							scripts for this system.
+						</p>
+				</div>
+
+				<div class="subsection">
+					<h3 id="config_x60">
+						ThinkPad X60, X60S and X60 Tablet configuration (file: resources/libreboot/config/grub/x60/config)
+					</h3>
+						<ul>
+							<li>General setup / Expert mode = <i>enable</i></li>
+							<li>General / Use CMOS for configuration values = <i>enable</i></li>
+							
+							<li>Mainboard / Mainboard vendor = <i>Lenovo</i></li>
+							<li>Mainboard / Mainboard model = <i>ThinkPad X60 / X60s / X60t</i></li>
+							<li>Mainboard / ROM chip size = <i>2048 KB (2 MB)</i></li>
+							<li>Chipset / Include CPU microcode in CBFS = <i>Do not include microcode updates</i></li>
+							<li>Devices / Use native graphics initialization = <i>enable</i></li>
+							<li>
+								Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer)
+								<ul>
+									<li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time
+									to enable coreboot framebuffer for a separate set of ROM images, in each system.</li>
+								</ul>
+							</li>
+							<li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li>
+							<li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li>
+							<li>Generic Drivers / Type of dongle = <i>Net20DC or compatible</i></li>
+							<li>Generic Drivers / Digitizer = <i>Present</i></li>
+							
+							<li>Console / USB dongle console output = <i>enable</i></li>
+							<li>Payload / Add a payload = <i>An ELF executable payload</i></li>
+							<li>Payload / Payload path and filename = <i>grub.elf</i></li>
+						</ul>
+						<p>
+							Now go back into Devices:
+						</p>
+						<ul>
+							<li>Devices / Run VGA Option ROMs = <i>disable</i></li>
+							<li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li>
+						</ul>
+						<p>
+							The resulting .config file was saved as resources/libreboot/config/<b>grub/x60/config</b> and is used by the build
+							scripts for this system.
+						</p>
+						<p>
+							This configuration is used on all variants: X60, X60S and X60 Tablet.
+						</p>
+				</div>
+
+				<div class="subsection">
+					<h3 id="config_t60">
+						ThinkPad T60 configuration (file: resources/libreboot/config/grub/t60/config)
+					</h3>
+						<ul>
+							<li>General setup / Expert mode = <i>enable</i></li>
+							<li>General setup / Local version string = <i>79ETE7WW (2.27 )</i></li>
+							<li>General / Use CMOS for configuration values = <i>enable</i></li>
+							
+							<li>Mainboard / Mainboard vendor = <i>Lenovo</i></li>
+							<li>Mainboard / Mainboard model = <i>ThinkPad T60 / T60p</i></li>
+							<li>Mainboard / ROM chip size = <i>2048 KB (2 MB)</i></li>
+							<li>System tables / SMBIOS Serial Number = <i>L3DKE06</i></li>
+							<li>System tables / SMBIOS Version Number = <i>ThinkPad T60</i></li>
+							<li>System tables / SMBIOS Manufacturer = <i>LENOVO</i></li>
+							<li>System tables / SMBIOS Product name = <i>1951FEG</i></li>
+							<li>Chipset / Include CPU microcode in CBFS = <i>Do not include microcode updates</i></li>
+							<li>Devices / Use native graphics initialization = <i>enable</i></li>
+							<li>
+								Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer)
+								<ul>
+									<li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time
+									to enable coreboot framebuffer for a separate set of ROM images, in each system.</li>
+								</ul>
+							</li>
+							<li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li>
+							<li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li>
+							<li>Generic Drivers / Type of dongle = <i>Net20DC or compatible</i></li>
+							
+							<li>Console / USB dongle console output = <i>enable</i></li>
+							<li>Payload / Add a payload = <i>An ELF executable payload</i></li>
+							<li>Payload / Payload path and filename = <i>grub.elf</i></li>
+						</ul>
+						<p>
+							Go back into Devices:
+						</p>
+						<ul>
+							<li>Devices / Run VGA Option ROMs = <i>disable</i></li>
+							<li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li>
+						</ul>
+						<p>
+							The resulting .config file was saved as resources/libreboot/config/<b>grub/t60/config</b> and is used by the build
+							scripts for this system.
+						</p>	
+						<p>
+							It is believed that the motherboards on 14.1&quot; and 15.1&quot; T60s are the same, so the same configuration is used
+							on both the 14.1&quot; and 15.1&quot; T60s.
+						</p>
+				</div>
+					
+				<div class="subsection">
+					<h3 id="config_x200">
+						ThinkPad X200 configuration (file: resources/libreboot/config/grub/x200_4mb/config and resources/libreboot/config/grub/x200_8mb/config)
+					</h3>
+						<p>
+							These are saved as two configs, because there are 2 size flash chips: 4MB or 8MB. 
+						</p>
+						<ul>
+							<li>General / Expert mode = <i>enable</i></li>
+							<li>General / Use CMOS for configuration values = <i>enable</i></li>
+							
+							<li>Mainboard / Mainboard vendor = <i>Lenovo</i></li>
+							<li>Mainboard / Mainboard model = <i>ThinkPad X200</i></li>
+							<li>Mainboard / ROM chip size = <i>4096 KB (4 MB)</i> or <i>8192 KB (8 MB)</i> depending on flash chip size</li>
+							<li>Chipset / Include CPU microcode in CBFS = <i>Do not include microcode updates</i></li>
+							<li>Chipset / Size of CBFS filesystem in ROM = byte size <i>0x7FD000</i> (for 8MB flash chip) or <i>3FD000</i> (for 4MB flash chip)</li>
+							<li>Devices / Use native graphics initialization = <i>enable</i></li>
+							<li>
+								Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer)
+								<ul>
+									<li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time
+									to enable coreboot framebuffer for a separate set of ROM images, in each system.</li>
+								</ul>
+							</li>
+							<li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li>
+							<li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li>
+							<li>Generic Drivers / Type of dongle = <i>Net20DC or compatible</i></li>
+							<li>Generic Drivers / Digitizer = <i>Present</i></li>
+							
+							<li>Console / USB dongle console output = <i>enable</i></li>
+							<li>Payload / Add a payload = <i>An ELF executable payload</i></li>
+							<li>Payload / Payload path and filename = <i>grub.elf</i></li>
+						</ul>
+						<p>
+							Go back and disable option ROMs:
+						</p>
+						<ul>
+							<li>Devices / Run VGA Option ROMs = <i>disable</i></li>
+							<li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li>
+						</ul>
+						<p>
+							The resulting .config file was saved as resources/libreboot/config/<b>grub/x200_8mb/config</b> and
+							resources/libreboot/config/<b>grub/x200_4mb/config</b> and is used by the build
+							scripts for this system.
+						</p>
+				</div>
 				
-			<div class="subsection">
-				<h3 id="config_qemu_i440fx_piix4">
-					QEMU (x86 i440fx/piix4) configuration (file: resources/libreboot/config/grub/qemu_i440fx_piix4/config)
-				</h3>
-					<ul>
-						<li>General / Expert mode = <i>enable</i></li>
-						<li>Mainboard / Mainboard vendor = <i>Emulation</i></li>
-						<li>Mainboard / Mainboard model = <i>QEMU x86 i440fx/piix4 (aka qemu -M pc)</i></li>
-						<li>Mainboard / ROM chip size = <i>8192 KB (8 MB)</i></li>
-						<li>Devices / Use native graphics initialization = <i>enable</i> (should already be enabled)</li>
-						<li>
-							Display / Keep VESA framebuffer = <i>enable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer)
-							<ul>
-								<li>Libreboot provides this with framebuffer enabled by default, but it automatically patches a copy of the config at build time
-								to enable coreboot text-mode for a separate set of ROM images, in each system.</li>
-							</ul>
-						</li>
-						
-						<li>Payload / Add a payload = <i>An ELF executable payload</i></li>
-						<li>Payload / Payload path and filename = <i>grub.elf</i></li>
-					</ul>
-					<p>
-						Go back and disable option ROMs:
-					</p>
-					<ul>
-						<li>Devices / Run VGA Option ROMs = <i>disable</i></li>
-						<li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li>
-					</ul>
-					<p>
-						The resulting .config file was saved as resources/libreboot/config/<b>grub/qemu_i440fx_piix4/config</b> and is used by the build
-						scripts for this system.
-					</p>
-			</div>
+				<div class="subsection">
+					<h3 id="config_r400">
+						ThinkPad R400 configuration (file: resources/libreboot/config/grub/r400_4mb/config and resources/libreboot/config/grub/r400_8mb/config)
+					</h3>
+						<p>
+							These are saved as two configs, because there are 2 size flash chips: 4MB or 8MB. 
+						</p>
+						<ul>
+							<li>General / Expert mode = <i>enable</i></li>
+							<li>General / Use CMOS for configuration values = <i>enable</i></li>
+							
+							<li>Mainboard / Mainboard vendor = <i>Lenovo</i></li>
+							<li>Mainboard / Mainboard model = <i>ThinkPad R400</i></li>
+							<li>Mainboard / ROM chip size = <i>4096 KB (4 MB)</i> or <i>8192 KB (8 MB)</i> depending on flash chip size</li>
+							<li>Chipset / Include CPU microcode in CBFS = <i>Do not include microcode updates</i></li>
+							<li>Chipset / Size of CBFS filesystem in ROM = byte size <i>0x7FD000</i> (for 8MB flash chip) or <i>3FD000</i> (for 4MB flash chip)</li>
+							<li>Devices / Use native graphics initialization = <i>enable</i></li>
+							<li>
+								Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer)
+								<ul>
+									<li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time
+									to enable coreboot framebuffer for a separate set of ROM images, in each system.</li>
+								</ul>
+							</li>
+							<li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li>
+							<li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li>
+							<li>Generic Drivers / Type of dongle = <i>Net20DC or compatible</i></li>
+							
+							<li>Console / USB dongle console output = <i>enable</i></li>
+							<li>Payload / Add a payload = <i>An ELF executable payload</i></li>
+							<li>Payload / Payload path and filename = <i>grub.elf</i></li>
+						</ul>
+						<p>
+							Go back and disable option ROMs:
+						</p>
+						<ul>
+							<li>Devices / Run VGA Option ROMs = <i>disable</i></li>
+							<li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li>
+						</ul>
+						<p>
+							The resulting .config file was saved as resources/libreboot/config/<b>grub/r400_8mb/config</b> and
+							resources/libreboot/config/<b>grub/r400_4mb/config</b> and is used by the build
+							scripts for this system.
+						</p>
+				</div>
 				
-			<div class="subsection">
-				<h3 id="config_qemu_q35_ich9">
-					QEMU (x86 q35/ich9) configuration (file: resources/libreboot/config/grub/qemu_q35_ich9/config)
-				</h3>
-					<ul>
-						<li>General / Expert mode = <i>enable</i></li>
-						<li>Mainboard / Mainboard vendor = <i>Emulation</i></li>
-						<li>Mainboard / Mainboard model = <i>QEMU x86 q35/ich9 (aka qemu -M q35)</i></li>
-						<li>Mainboard / ROM chip size = <i>8192 KB (8 MB)</i></li>
-						<li>Devices / Use native graphics initialization = <i>enable</i> (should already be enabled)</li>
-						<li>
-							Display / Keep VESA framebuffer = <i>enable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer)
-							<ul>
-								<li>Libreboot provides this with framebuffer enabled by default, but it automatically patches a copy of the config at build time
-								to enable coreboot text-mode for a separate set of ROM images, in each system.</li>
-							</ul>
-						</li>
-						
-						<li>Payload / Add a payload = <i>An ELF executable payload</i></li>
-						<li>Payload / Payload path and filename = <i>grub.elf</i></li>
-					</ul>
-					<p>
-						Go back and disable option ROMs:
-					</p>
-					<ul>
-						<li>Devices / Run VGA Option ROMs = <i>disable</i></li>
-						<li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li>
-					</ul>
-					<p>
-						The resulting .config file was saved as resources/libreboot/config/<b>grub/qemu_q35_ich9/config</b> and is used by the build
-						scripts for this system.
-					</p>
-			</div>
+				<div class="subsection">
+					<h3 id="config_t400">
+						ThinkPad T400 configuration (file: resources/libreboot/config/grub/t400_4mb/config and resources/libreboot/config/grub/t400_8mb/config)
+					</h3>
+						<p>
+							These are saved as two configs, because there are 2 size flash chips: 4MB or 8MB. 
+						</p>
+						<ul>
+							<li>General / Expert mode = <i>enable</i></li>
+							<li>General / Use CMOS for configuration values = <i>enable</i></li>
+							
+							<li>Mainboard / Mainboard vendor = <i>Lenovo</i></li>
+							<li>Mainboard / Mainboard model = <i>ThinkPad T400</i></li>
+							<li>Mainboard / ROM chip size = <i>4096 KB (4 MB)</i> or <i>8192 KB (8 MB)</i> depending on flash chip size</li>
+							<li>Chipset / Include CPU microcode in CBFS = <i>Do not include microcode updates</i></li>
+							<li>Chipset / Size of CBFS filesystem in ROM = byte size <i>0x7FD000</i> (for 8MB flash chip) or <i>3FD000</i> (for 4MB flash chip)</li>
+							<li>Devices / Use native graphics initialization = <i>enable</i></li>
+							<li>
+								Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer)
+								<ul>
+									<li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time
+									to enable coreboot framebuffer for a separate set of ROM images, in each system.</li>
+								</ul>
+							</li>
+							<li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li>
+							<li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li>
+							<li>Generic Drivers / Type of dongle = <i>Net20DC or compatible</i></li>
+							
+							<li>Console / USB dongle console output = <i>enable</i></li>
+							<li>Payload / Add a payload = <i>An ELF executable payload</i></li>
+							<li>Payload / Payload path and filename = <i>grub.elf</i></li>
+						</ul>
+						<p>
+							Go back and disable option ROMs:
+						</p>
+						<ul>
+							<li>Devices / Run VGA Option ROMs = <i>disable</i></li>
+							<li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li>
+						</ul>
+						<p>
+							The resulting .config file was saved as resources/libreboot/config/<b>grub/t400_8mb/config</b> and
+							resources/libreboot/config/<b>grub/t400_4mb/config</b> and is used by the build
+							scripts for this system.
+						</p>
+				</div>
+				
+				<div class="subsection">
+					<h3 id="config_t500">
+						ThinkPad T500 configuration (file: resources/libreboot/config/grub/t500_4mb/config and resources/libreboot/config/grub/t500_8mb/config)
+					</h3>
+						<p>
+							These are saved as two configs, because there are 2 size flash chips: 4MB or 8MB. 
+						</p>
+						<ul>
+							<li>General / Expert mode = <i>enable</i></li>
+							<li>General / Use CMOS for configuration values = <i>enable</i></li>
+							
+							<li>Mainboard / Mainboard vendor = <i>Lenovo</i></li>
+							<li>Mainboard / Mainboard model = <i>ThinkPad T500</i></li>
+							<li>Mainboard / ROM chip size = <i>4096 KB (4 MB)</i> or <i>8192 KB (8 MB)</i> depending on flash chip size</li>
+							<li>Chipset / Include CPU microcode in CBFS = <i>Do not include microcode updates</i></li>
+							<li>Chipset / Size of CBFS filesystem in ROM = byte size <i>0x7FD000</i> (for 8MB flash chip) or <i>3FD000</i> (for 4MB flash chip)</li>
+							<li>Devices / Use native graphics initialization = <i>enable</i></li>
+							<li>
+								Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer)
+								<ul>
+									<li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time
+									to enable coreboot framebuffer for a separate set of ROM images, in each system.</li>
+								</ul>
+							</li>
+							<li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li>
+							<li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li>
+							<li>Generic Drivers / Type of dongle = <i>Net20DC or compatible</i></li>
+							
+							<li>Console / USB dongle console output = <i>enable</i></li>
+							<li>Payload / Add a payload = <i>An ELF executable payload</i></li>
+							<li>Payload / Payload path and filename = <i>grub.elf</i></li>
+						</ul>
+						<p>
+							Go back and disable option ROMs:
+						</p>
+						<ul>
+							<li>Devices / Run VGA Option ROMs = <i>disable</i></li>
+							<li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li>
+						</ul>
+						<p>
+							The resulting .config file was saved as resources/libreboot/config/<b>grub/t500_8mb/config</b> and
+							resources/libreboot/config/<b>grub/t500_4mb/config</b> and is used by the build
+							scripts for this system.
+						</p>
+				</div>
+
+				<div class="subsection">
+					<h3 id="config_macbook21">
+						MacBook2,1 configuration (file: resources/libreboot/config/grub/macbook21/config)
+					</h3>
+						<ul>
+							<li>General / Expert mode = <i>enable</i></li>
+							<li>General / Local version string = <i>&quot;&nbsp;&nbsp;&nbsp;&nbsp;MB21.88Z.00A5.B07.0706270922&quot;</i> (without the quotes)</li>
+							<li>General / Use CMOS for configuration values = <i>enable</i></li>
+							
+							<li>Mainboard / Mainboard vendor = <i>Apple</i></li>
+							<li>Mainboard / Mainboard model = <i>Macbook2,1 ICH7 TESTING</i></li>
+							<li>Mainboard / ROM chip size = <i>2048 KB (2 MB)</i></li>
+							<li>System tables / SMBIOS Serial Number = <i>W8724XXXXXX</i></li>
+							<li>System tables / SMBIOS Version Number = <i>1.0</i></li>
+							<li>System tables / SMBIOS Manufacturer = <i>Apple Inc.</i></li>
+							<li>System tables / SMBIOS Product Name = <i>MacBook2,1</i></li>
+							<li>Chipset / Include CPU microcode in CBFS = <i>Do not include microcode updates</i></li>
+							<li>Devices / Use native graphics initialization = <i>enable</i></li>
+							<li>
+								Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer)
+								<ul>
+									<li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time
+									to enable coreboot framebuffer for a separate set of ROM images, in each system.</li>
+								</ul>
+							</li>
+							<li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li>
+							<li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li>
+							<li>Generic Drivers / Type of dongle = <i></i></li>
+							
+							<li>Console / USB dongle console output = <i>enable</i></li>
+							<li>Payload / Add a payload = <i>An ELF executable payload</i></li>
+							<li>Payload / Payload path and filename = <i>grub.elf</i></li>
+						</ul>
+						<p>
+							Go back and disable option ROMs:
+						</p>
+						<ul>
+							<li>Devices / Run VGA Option ROMs = <i>disable</i></li>
+							<li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li>
+						</ul>
+						<p>
+							The resulting .config file was saved as resources/libreboot/config/<b>grub/macbook21/config</b> and is used by the build
+							scripts for this system. <b>This config is also used for the MacBook1,1</b>.
+						</p>
+				</div>
+					
+				<div class="subsection">
+					<h3 id="config_qemu_i440fx_piix4">
+						QEMU (x86 i440fx/piix4) configuration (file: resources/libreboot/config/grub/qemu_i440fx_piix4/config)
+					</h3>
+						<ul>
+							<li>General / Expert mode = <i>enable</i></li>
+							<li>Mainboard / Mainboard vendor = <i>Emulation</i></li>
+							<li>Mainboard / Mainboard model = <i>QEMU x86 i440fx/piix4 (aka qemu -M pc)</i></li>
+							<li>Mainboard / ROM chip size = <i>8192 KB (8 MB)</i></li>
+							<li>Devices / Use native graphics initialization = <i>enable</i> (should already be enabled)</li>
+							<li>
+								Display / Keep VESA framebuffer = <i>enable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer)
+								<ul>
+									<li>Libreboot provides this with framebuffer enabled by default, but it automatically patches a copy of the config at build time
+									to enable coreboot text-mode for a separate set of ROM images, in each system.</li>
+								</ul>
+							</li>
+							
+							<li>Payload / Add a payload = <i>An ELF executable payload</i></li>
+							<li>Payload / Payload path and filename = <i>grub.elf</i></li>
+						</ul>
+						<p>
+							Go back and disable option ROMs:
+						</p>
+						<ul>
+							<li>Devices / Run VGA Option ROMs = <i>disable</i></li>
+							<li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li>
+						</ul>
+						<p>
+							The resulting .config file was saved as resources/libreboot/config/<b>grub/qemu_i440fx_piix4/config</b> and is used by the build
+							scripts for this system.
+						</p>
+				</div>
+					
+				<div class="subsection">
+					<h3 id="config_qemu_q35_ich9">
+						QEMU (x86 q35/ich9) configuration (file: resources/libreboot/config/grub/qemu_q35_ich9/config)
+					</h3>
+						<ul>
+							<li>General / Expert mode = <i>enable</i></li>
+							<li>Mainboard / Mainboard vendor = <i>Emulation</i></li>
+							<li>Mainboard / Mainboard model = <i>QEMU x86 q35/ich9 (aka qemu -M q35)</i></li>
+							<li>Mainboard / ROM chip size = <i>8192 KB (8 MB)</i></li>
+							<li>Devices / Use native graphics initialization = <i>enable</i> (should already be enabled)</li>
+							<li>
+								Display / Keep VESA framebuffer = <i>enable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer)
+								<ul>
+									<li>Libreboot provides this with framebuffer enabled by default, but it automatically patches a copy of the config at build time
+									to enable coreboot text-mode for a separate set of ROM images, in each system.</li>
+								</ul>
+							</li>
+							
+							<li>Payload / Add a payload = <i>An ELF executable payload</i></li>
+							<li>Payload / Payload path and filename = <i>grub.elf</i></li>
+						</ul>
+						<p>
+							Go back and disable option ROMs:
+						</p>
+						<ul>
+							<li>Devices / Run VGA Option ROMs = <i>disable</i></li>
+							<li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li>
+						</ul>
+						<p>
+							The resulting .config file was saved as resources/libreboot/config/<b>grub/qemu_q35_ich9/config</b> and is used by the build
+							scripts for this system.
+						</p>
+				</div>
 
 			<p><a href="#pagetop">Back to top of page.</a></p>