diff options
| author | Alyssa Rosenzweig <alyssa@rosenzweig.io> | 2017-03-20 20:26:48 -0700 |
|---|---|---|
| committer | Alyssa Rosenzweig <alyssa@rosenzweig.io> | 2017-03-20 20:26:48 -0700 |
| commit | a62fe03d3e84150e6186f57f53029d5a9abe3d7b (patch) | |
| tree | 1a1276b32fcc5388165bd42b685c0d9e83380a7b /docs/hardware/x60_heatsink.md | |
| parent | 07da8fb0c7d513bc73470b69be99f1add0cb95e5 (diff) | |
| download | librebootfr-a62fe03d3e84150e6186f57f53029d5a9abe3d7b.tar.gz librebootfr-a62fe03d3e84150e6186f57f53029d5a9abe3d7b.zip | |
undo breakages
Diffstat (limited to 'docs/hardware/x60_heatsink.md')
| -rw-r--r-- | docs/hardware/x60_heatsink.md | 67 |
1 files changed, 31 insertions, 36 deletions
diff --git a/docs/hardware/x60_heatsink.md b/docs/hardware/x60_heatsink.md index 51721324..1234d067 100644 --- a/docs/hardware/x60_heatsink.md +++ b/docs/hardware/x60_heatsink.md @@ -1,8 +1,13 @@ -% Changing the fan/heatsink on the ThinkPad X60 + +Changing the fan/heatsink on the ThinkPad X60 +============================================= This guide will teach you how to replace the fan and heatsink on your ThinkPad X60. + + + Table of Contents ================= @@ -10,6 +15,8 @@ Table of Contents - [Software Requirements](#software_requirements) - [Disassembly](#procedure) + + Hardware requirements {#hardware_requirements} ===================== @@ -19,88 +26,75 @@ Hardware requirements {#hardware_requirements} 'ok') - Something to spread the paste with + + Software requirements (for CPU stress testing) {#software_requirements} ============================================== - xsensors utility - stress utility + + Disassembly {#procedure} =========== -Remove those screws: - +Remove those screws:\  -Push the keyboard forward (carefully): - +Push the keyboard forward (carefully):\  -Lift the keyboard up and disconnect it from the board: - +Lift the keyboard up and disconnect it from the board:\  Grab the right-hand side of the chassis and force it off (gently) and -pry up the rest of the chassis: - +pry up the rest of the chassis:\  -You should now have this: - +You should now have this:\  -Disconnect the wifi antenna cables, the modem cable and the speaker: - +Disconnect the wifi antenna cables, the modem cable and the speaker:\  Unroute the cables along their path, carefully lifting the tape that holds them in place. Then, disconnect the modem cable (other end) and power connection and unroute all the cables so that they dangle by the -monitor hinge on the right-hand side: - +monitor hinge on the right-hand side:\  Disconnect the monitor from the motherboard, and unroute the grey -antenna cable, carefully lifting the tape that holds it into place: - +antenna cable, carefully lifting the tape that holds it into place:\  Carefully lift the remaining tape and unroute the left antenna cable so -that it is loose: - +that it is loose:\  -Remove those screws: - +Remove those screws:\  -Remove those screws: - +Remove those screws:\  -Carefully remove the plate, like so: - +Carefully remove the plate, like so:\  -Remove the SATA connector: - +Remove the SATA connector:\  -Now remove the motherboard (gently) and cast the lcd/chassis aside: - +Now remove the motherboard (gently) and cast the lcd/chassis aside:\  -Look at that black tape above the heatsink, remove it: - +Look at that black tape above the heatsink, remove it:\  -Now you have removed it: - +Now you have removed it:\  Disconnect the fan and remove all the screws, heatsink will easily come -off: - +off:\  Remove the old paste with a cloth (from the CPU and heatsink) and then @@ -113,8 +107,9 @@ the heatsink, reversing previous steps. **xsensors** (or **watch sensors** command) can be used to monitor heat. Below 90C is ok. -Copyright © 2014, 2015 Leah Rowe <info@minifree.org> + +Copyright © 2014, 2015 Leah Rowe <info@minifree.org>\ Permission is granted to copy, distribute and/or modify this document under the terms of the Creative Commons Attribution-ShareAlike 4.0 International license or any later version published by Creative |